Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Prop & Back-placa Jigs de broca para DA100 & 150 \ DLE111 \ 3W50-170 \ TMM53-106

Generating Links

Prop & Back-placa Jigs de broca para DA100 & 150 \ DLE111 \ 3W50-170 \ TMM53-106

Preço:

Now save economize 0,00 € 0,00 €

14,76 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
DJ-111-100
Envio Grátis? Clique aqui aprender mais!
Prop & Back-placa Jigs de broca para DA100 & 150 \ DLE111 \ 3W50-170 \ TMM53-106

Garante perfuração reta de placas hélice e girador de volta.
Serrilhado OD o que torna mais fácil para removível dispositivo elétrico.
Por favor, escolha o tamanho certo da broca antes de fixar o gabarito sobre a sua hélice.

broca de 5 mm é utilizado para hélice perfuração do seguinte DA100 & 150 \ DLE111 \ 3W50-170 \ TMM53-106

* Nota *: É melhor para perfurar hélice do rosto de volta. Voltar a perfurar várias vezes como você ir para limpar madeira do bit para garantir um buraco suave e preciso. Não force a pouco através da prop. Coloque o parafuso no primeiro buraco após a perfuração para ajudar com o alinhamento ao perfurar outros buracos. Por favor, sempre orientar o prop com pontas da lâmina, às 9 e 03:00 ou horizontal ao chão com o curso de compressão antes de perfuração. Em caso de desembarques vara morta esta pode salvar seu prop e sua estrutura.
Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

sucram | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 15, 2014

Zapfen 10mm, Bohrer und Lcher 5mm.

For Centerhole 10mm, drill 5mm.

Perfect little tool to drill propellers like DLE 120 (and the listed in the header)

RC Fun | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 21, 2012

I cant see how you can do without this if you run the bigger petrol/gas motors

ravdigo | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 21, 2012

Much better to use in your prop.For Da 100&150 / DLE111

sylvainfz6 | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 12, 2012

ideal pour per les hlice en bois ou carbonne DLA112

xcellair | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 18, 2011

this is a brilliant tool, cheap and very accurate,,used it today for the first time,ya just cant really go wrong with this as your guide,, have used on CF props,, works fine,, get it soon,, for your next prop you wont be sorry

Kordiss | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 31, 2011

Thanks HK for this price and for this product. You must be apply thin oil on it when you not use

MissOshkosh | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 09, 2010

Great product, nice an heavy.

It can also be used for MT57 engines. However, the holes in the jig are 5mm and MT uses 4mm, but center of the holes are aligned. I recommend that you drill 5mm holes in the prop and cut pieces of a brass tube (5mm ext/4mm int), and put in the holes. You can also put the tubes in the jig and drill with a 4mm bit, but you will probably destroy the tubes. Use a wooden base for the prop to rest on when drilling.

Cliente | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 09, 2010

Great product, nice an heavy.

It can also be used for MT57 engines. However, the holes in the jig is 5mm and MT uses 4mm, but center of the holes are aligned. I recommend that you drill 5mm holes in the prop and cut pieces of a brass tube (5mm ext/4mm int), and put in the holes. You can also put the tubes in the jig and drill with a 4mm bit, but you will probably destroy the tubes.

ricardonaster | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 27, 2010

Excelente ferramenta para furao de helice para quem tem motores a gasolina de grande cilindrada, bom acabamento.

Cliente | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 28, 2010

This has worked great for me! I'd recommend it. Good stuff.

  1. 1
  2. 2
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!