Prop Saver w / 3 milímetros Banda

• Overall
• Quality
• Value

Prop saver specs

Nov 14, 2007

The prop save design is a little different than I am use to, but seems to be reasonably well made. The body is aluminum with steel screws.



The weight of the body alone is 2.51gm or 3.1gm with the O-ring. The body as a very snug (more than my other prop savers) fit to the motor shaft an measured in at .118in or 2.997mm.



The projecting shaft sticking out the front is a .152in diameter (3.861mm) and nicely fits the standard prop adaptor rings from APC.



The O-ring is VERY strong compared to small rubber bands.

• Overall
• Quality
• Value

Pretty good

Nov 14, 2007

For the price it can not get any better. It fits on the shaft like it is supposed to. Only ting I had to do when using gws props is bore or drill the hole out oversize to fit over the prop saver. Having the shat running thru the prop makes it pretty much universal just have to have the proper diameter hole in the prop and it will fit on there. Overall it does the job that it is supposed to do.

• Overall
• Quality
• Value

Awesome

Nov 14, 2007

For the price it can not get any better. It fits on the shaft like it is supposed to. Only ting I had to do when using gws props is bore or drill the hole out oversize to fit over the prop saver. Having the shat running thru the prop makes it pretty much universal just have to have the proper diameter hole in the prop and it will fit on there. Overall it does the job that it is supposed to do.

• Overall
• Quality
• Value

Awesome

Nov 14, 2007

For the price it can not get any better. It fits on the shaft like it is supposed to. Only ting I had to do when using gws props is bore or drill the hole out oversize to fit over the prop saver. Having the shat running thru the prop makes it pretty much universal just have to have the proper diameter hole in the prop and it will fit on there. Overall it does the job that it is supposed to do.

• Overall
• Quality
• Value

Awesome

Nov 14, 2007

For the price it can not get any better. It fits on the shaft like it is supposed to. Only ting I had to do when using gws props is bore or drill the hole out oversize to fit over the prop saver. Having the shat running thru the prop makes it pretty much universal just have to have the proper diameter hole in the prop and it will fit on there. Overall it does the job that it is supposed to do.

• Overall
• Quality
• Value

Prop Saver w/ Band 3mm

Nov 14, 2007

I purchased this propsaver for a motor with very short axle. Now i can mount a prop there very good. very cheap and good quality

• Overall
• Quality
• Value

prop saver

Nov 14, 2007

Good quality, does what its supposed to. Excellent price!

• Overall
• Quality
• Value

Alloy Prop Saver & Adapter w/

Nov 14, 2007

I found the prop shaft a little for my liking, I just cut it back to about 3mm. Works fine that way.

• Overall
• Quality
• Value

Prop Saver

Nov 14, 2007

This propsaver is great. Lightweight, inexpensive and fit's 3mm shaft nicely. I'm using it with the smaller GWS DD props, like the 4040 and 5043 and they fit great. I just wish they had more in stock.

• Overall
• Quality
• Value

prop saver with band 3 mm

Nov 14, 2007

La longueur des vis et la tension de l'lastic font de cet article au demeurant parfait plutt un support d'hlice qu'un protecteur d'hlice. Sinon, excellent rapport qualit prix

Piloo