-
Descrição
do -
O Q cérebro fornece a solução de energia perfeita para o seu Quadrotor através da incorporação de 4 x 25A CES em uma única unidade. Isso mantém a fiação muito arrumados e permite-lhe montar o aparelho no meio do quadro em vez de ter de montar uma ESC em cada braço.
Com a proteção de baixa tensão ajustável, modo de inicialização e tempo do motor, a Q cérebro não é curto em recursos de programação. Esta e sua capacidade de operar em 2 ~ 4S lipoly ou 5 ~ 12 células Ni-XX torna um muito versátil ESC.
O Q cérebro mantém as coisas simples por ter todos os cabos do motor pré-instalado e terminou com 3,5 milímetros conectores de bala. Existem 4 leads x sinal (um com poder) que vai ligar diretamente para as portas de saída ESC do seu controlador de vôo. Um cubo do acelerador está também incluído para utilização em aplicações que requerem o uso de um acelerador de sinal partilhada.
• Agora Envio com OneShot125.
Algumas ações podem exigir a piscar ESC para OneShot125 via ferramenta flash referenciado nos itens relacionados
Características:
• Conveniente design all-in-one ESC
saída 25A • 4 x
• protecção ajustável de baixa tensão
• Totalmente programável
especificações:
Tensão de entrada: 7,4 ~ 14.8V (2 ~ 4S lipoly)
Cont. Atual: 25A x 4
Explosão atual (10 seg): 30A x 4
Tipo BEC: Switching
BEC saída: 5.25V@3A
Motor fio Comprimento: 250 milímetros
Dimensões: 69x62x11mm
Peso: 112 g
* Nota: Este ESC é compatível com o cartão de programação Turnigy BESC (vendido separadamente). Por favor, veja os itens relacionados abaixo. -
Product
Specifications -
Características do Produto
-
SKU:
9020000007-0
-
Brand:
Não
-
Capacidade ( mAh)
Não
-
Peso ( g )
147.00
-
Comprimento:
120.00
-
Largura:
20.00
-
Altura
100.00
-
SKU:
-
Community
Discussions -
-
Rate&
Review -
Terry, it is common for this type of component to come without a connector, as there are so many out there, and the end user can simply solder on the connector of his/her choice. Far more versatile this way.
I've added an XT60, as that's what all my batteries are (I started with a Nova), and just spun up my Quanum XJ470 with this board, and it seems to work great! After a few minutes of the maiden flight, she wasn't even all that warm, but we'll see what changes when I start flying with a payload (camera, etc.)
Die Kabel sind lang genug selbst für einen 500er Quad.Perfect solution to making a clean looking well balanced quad. No need for power distribution board. Have really pushed these q brains and they are awesome. Using 4 1000kv motors with 10x45 props no real heat build up at all if air can circulate around them. Give them room to breath and you shouldn't have problems. Motor setup is a little confusing for some flight controllers but easy to configure. May have to extend wires for bigger frames ie 600 size plus. Once installed on frame and configured with flight controller you should never have to worry again. Used these on a 450 qaud and 600 quad with extended wires. Have never let me down with over 40 hours use on each. Wish I could say the same for the batteries I bought at same time. Just to sum up clean set up and decent 2200 mah 30c battery 1000kv motors 10x45 props. 10 minutes of solid flying time. What more do you need besides more batteries lola bit bulky, i was saving it for a larger build but went with a cheaper plastic frame and larger motors and it flew nice.I have used the Qbrain 12A and now I m putting a Q330 quad so I m gonna try this 25A on it. This is a great ESC.Works for Tricopters too. Only slight niggle was that two motor leads were 35mm too short, but made up short extensions and all appears OK. The BEC system works fine and gives a perfectly normal 5.25v but this appears to be enough to destroy small digital servos, so if you are using it for a Tricopter, use analogue servos. Other than that this is a neat and economical unit for a small multirotorI really like this ESC. It simplifies everything and fits nicely. I'm running a pair of them in an X8 with a simple power splitter cable between them.Very good ESC , I use it with my quad size 450 , DJI Outrunner 920kv and 3S 5000mAh 20C battery . Care should be taken to cooling ESC , to provide the necessary air flow.This is my favorite ESC for quad copters. No need for a distribution board. Nice and neat. Works great on 3 or 4S. I have 4 of them on copters with some serious time and no failures.Squeezed this into my S500 frame custom quadcopter and had no problems with it so far. Great way to tidy your quadcopter up. -
Upload
Videos -
Upload
Files -
Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!
Customer filesmanuel en francais download now [496kb] Q-Brain 4x20A Manual Full download now [1772kb] qbrain_with_colling_fan.jpg download now [248kb] holes download now [487kb] manual download now [621kb] manual1 download now [1151kb] manual1 download now [1151kb] No File Name download now [621kb] TBS Discovery download now [1073kb] Holes Measured download now [487kb]
- acc
