Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Quanum NEON 250 Carbono Kit Quadro corrida com LEDs

Generating Links

Quanum NEON 250 Carbono Kit Quadro corrida com LEDs

Preço:

Now save economize 0,00 € 0,00 €

41,99 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9323000077-0
Envio Grátis? Clique aqui aprender mais!

O Quanum NEON é a evolução de 250 class hardware FPV corrida. A NEON incorpora todas as necessidades, luxos e insanidade que você poderia querer em um super resistente exoesqueleto de corrida cheia de carbono.

O Neon tem Cyborg parece tendendo longe dos quadros placa média empilhados da última temporada. E um perfil mais baixo aumenta a resistência, melhorando a massa CG para o controle crisp.

A Neon foi construído para corridas e engenharia desde o início para a durabilidade, feitas a partir de carbono total, as pilhas são montados próximos uns dos outros com amplo hardware CNC, tornando esta uma fortaleza voadora ... Com guardas de motor totalmente fechado e do compartimento da bateria. Todos os componentes estão alojados internamente para proteção exoesqueleto completa dos acessos mais difíceis. A parte da frente e de trás têm CNC fosco difusores de LED para um estilo fulgor de néon bem zoom em torno do curso. A frente suporta um no quadro da câmera FPV até 30mm. As pilhas de armação são espaçados em apenas 10 milímetros para a força de torção, mas deixa muito espaço para ESC, FC, engrenagem FPV e muito mais.

O Quanum NEON é um show rolha na aparência, qualidade, durabilidade e FPV demência.

Características:
• Frente e traseira CNC LED difusores para um efeito de néon do fulgor
• construção placa de carbono com baixo perfil força Exoskeleton
• compartimento de projeto do motor protegido do braço e da bateria
• Vasta gama de motores e adereços até 22 séries e adereços 6inch
• hardware CNC para redução de peso

especificações:
Distância entre eixos: 250 milímetros
Peso: 155 g
motores: 1806 ~ 2206 (12 ~ 19 milímetros de montagem)
Adereços: 5 ~ 6 polegadas
ESC: 10 ~ 20A
FPV Cam: até 31x13mm
LED: frente Vermelho Azul traseira

Requeridos:
4 x Motors 1806 ~ 2208
1 x Battery 800 ~ 1500mAh 2 ~ 4s
4 x Hélices até 6in
10 ~ 20A 4 x do CES
1 x controlador de vôo multi-rotor
rádio de 4 canais (6 canais recomendado para FPV e da utilização FC)
engrenagem FPV (opcional)

  • Quanum Neon 250 Frame Kit----
Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

tim | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 16, 2016

This frame looks great. But it's weak and breaks very easily. I bought two.... both are now trash. Pretty disappointed with my purchase, enough so that I have come back here to write this review warning others.

This frame has potential... but the design is such that cutouts in the base plate mean that the front arms are only attached by a couple of mm2 of material. The top plate only attaches to the front arms by one screw.

If you plan on using your quad purely for photography at minimal risk of crashing, then this frame will make it look badass.

Bartomiej | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 30, 2015

Great design. Good fit. Sadly you can't buy spare spacers, only screws. Original LED strips are not dense enough. only got 3 LEDs. It's not full carbon laminat. Inside it has glass fiber. only on top, and bottom there is carbon fiber. Big mistake is week nose section, because two forearms are hanging only on few milimeters of plate, which is main reason of destruction. You need to add your own carbon structure or something. Laminat is 1,2 mm thick, which would be great, if it was full carbon, now it's a bit weak. After all I think, that's more for the look, but it isn't bad product.

ulf | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 28, 2015

Generally a nice frame, but probably not suitable for fpv-racing. It cant even take a slow fall on grass, without breaking and shearing off screws.
Cannot recommend.

Reinis | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 21, 2015

Although this in very nice looking frame but its design is poor. I would even go as far as to claim that frame is made weak with intention! If you look at lower frame - notice that front of it is connected to whole frame with just two weak and thin carbon lines. I can not find other reason than intention to make this frame break for this poor design. Obviously - after crash front simply broke off.. And.. there are no spare parts available for this frame...

ad_wing | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 08, 2015

Quad perfeito para indoor noturno. Fica muito bonito.

Erwin | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 21, 2015

After destroying one frame in a very nasty crash ( both front arm came off ) I decided to buy 2 frames and double up all of the plates. It's nice and thick now it adds some weight to it but it is not dramatic it also makes it twice as expensive ofcource. I already put it nose first in to the ground a few times with pieces of propeller flying in all directions and one broken fpv antenna as a result but the frame is holding up nicely now, it never would have survived those crashes with just 1 bottom plate, Hobbyking should make a version off this kit with plates that are twice as thick as this one , beside that it is a great frame to fly and it looks really great in the air.

Erwin | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 21, 2015

After destroying one frame in a very nasty crash ( both front arm came off ) I decided to buy 2 frames and double up all of the plates.
It's nice and thick now it adds some weight to it but it is not dramatic it also makes it twice as expensive ofcource.
I already put it nose first in to the ground a few times with pieces of propeller flying in all directions and one broken fpv antenna as a result but the frame is holding up nicely now, it never would have survived those crashes with just 1 bottom plate,
Hobbyking should make a version off this kit with plates that are twice as thick as this one beside that it is a great frame to fly and it looks really great in the air.

|TAB| | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 01, 2015

nice and strong, enough space for everything

mrlee03 | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 22, 2015

After reading stories about how weak this frame is i still ordered one as it looks fantastic, i have been flying it now for over a month and had my first big crash with it today (lost orientation) 20-25 metre freefall and hit the ground nose first at 45 degrees. im delighted to say that it survived with minimal damage. the battery tray screws have bent slightly and that is all.

Great value
Great looking
Fun to build
Would recomend this to everybody, Everybody needs a neon 250 at least once.


However i would not advise this frame for close proximity racing (woods, abandoned building etc etc) only because it is highly likely that this frame will break in hardcore racing and crashing circumstances.

BOSS302 | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 18, 2015

for the FUN Factor it is good !! but if starting out? might be disappointed? not in a bad way? but it is a little geared if you been flying a little bit? this out of the way if your skills are good to Novice not a bad FRAME! this is one of my "Personal Favorates" now with the Superior CC3D Controller it has a Somewhat "Predictable Feel" and I use it for my FPV racing and just having fun thing, the I highly recommend NOT getting the KK-Mini board! of 3 we tried it did not like this "Frame"???? and the KK bigger one will NOT FIT it "Can" but probably not how 99.999999pcnt would like to fit, get the
"Superior NAZE or CC3D boards" and "SMALL" 12a ESC's ,I now have 3 and there my "GO TO" ones for just fun fly !! but starting out? this may not be for you? but good to have for when you feel more confident in skills !!

  1. 1
  2. 2
  3. 3
Arquivos de clientes
No File Name Download [256]
Factory LEDs Download [512]
Factory LEDs Download [600]
Factory LEDs Download [797]
Factory LEDs-off Download [897]
Factory LEDs-off Download [857]
Complete no Fpv Download [2281]
ESC Wiring Download [2776]
Modification 1 Download [239]
Modification 2 Download [252]
  1. 1
  2. 2
  3. 3
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!

Acessórios