Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Quanum Pico 32bit escovado Board Flight Control

Generating Links

Quanum Pico 32bit escovado Board Flight Control

Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9154000023-0
Envio Grátis? Clique aqui aprender mais!

As coisas boas vêm em pacotes pequenos e neste caso não é apenas bom, sua grande.

Definindo o padrão em Multi-Rotores mais uma vez, Quanum ouviu construtores de mini e micro Quadrotor e lançou a uma função cheia escovado Board Flight Control que foi propósito projetado e construído para quads ao redor da classe 100 milímetros 100 milímetros e sub.

Este escovado FC tem quatro construído em ESC do na 4.3A per FET e é ideal para motores escovados na faixa de tamanho de 6 ~ 8 mm. Ele também tem uma em DSM2 receptor compatível construída / DSMX.

O Pico é um 32bit completa Cleanflight suportado placa FC e tem uma conexão micro USB. Depois de ter baixado cleanflight no seu PC, basta ligar o seu Pico Quanum FC Board em seu PC e você tem controle completo sobre suas configurações. É muito fácil.

NOTA: Não conecte a bateria e IN USB AO MESMO TEMPO, O RX vai receber PODER DO USB PARA SET UP. OS FETS será danificado OUTRA FORMA.

especificações:
ESC: escovado 4.3A x 4 (2 ~ 32KHz 4khz estoque) motores 6,7,8mm compatível
RF: DSM2 / DSMX compatível
Tamanho: 20x33x6mm
Peso: 2,5 g
Software: Cleanflight ou Baseflight compatível
Tensão: 1s compatível, com construído em 5V DC conversor A / DC



  • Quanum Pico 32bit FC
Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Registre-se para escrever comentários, por favor assinar em ou registar

| Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jul 21, 2016

Easy to setup, extremly small and light. Use it on cleanflight with 8mm motors(theses ones : http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=86504) and this frame (http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=89218), and this battery (http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=24920)

thomas | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Feb 17, 2016

Brought this a few weeks ago in conjunction with the whisp frame and micro motors Dark edition 8.5mm motors. Initially used betaflight luxfloat but found after a few flights it developed a drift problem. I then reflashed in CLeanfight to Alienwii F1 which I found to be MUCH more stable - no drift problems so far - perfectly stable flight characteristics. Not sure why other people are not doing this instead. Binding can be a tiresome affair. Takes me a minimum of 3 to 4 attempts to bind. You need to keep the transmitter VERY close to the board when binding. Finally, I have FPV gear onboard. It feels a bit sluggish even though its AUW is only 64grams. I might try another batch of motors but it would be nice to have a little bit more punch. Hope this helps ;)

Daniel | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Feb 16, 2016

This is without a doubt one of the best FCs for brushed motors. Able to run 8.5 motors with zero issues. Load Betaflight (naze32) and configure in Cleanflight. Use commands shown in prior posts in CLI.
- Had to buy an OrangeRX to use with my Taranis.
- PICO flight controller
- Recommend the Nano-tech 750mah 1s batteries. Flight time of 8 minutes
- Usmile all-in-one Ultra Micro 600TVL 170 Degree FPV Camera and Video Transmitter 5.8G 8CH 200mW VTX (fantastic and very lightweight FPV)
- Pololu #798 to clean the power. Video was horrible until I installed this.
- Hubsan props
- Parrot Mini Drone frame
- Custom 3D camera mount and FC mounts
- 4x 8.5mm brushed motors
- some VERY small size soldering

Absolutely a blast to fly indoors and out.

| Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Feb 13, 2016

If you're looking to upgrade the flight controller in your existing toy, or looking to build your own FPV quad with micro brushed motors, this board is probably your cheapest option. I've found similar boards for around $60 but this one has an integrated DSM2 receiver, so if you own a Spektrum receiver... even better. It's about the same size as a Hubsan x4 receiver, but has no screw holes. You'll have to mount it using zip ties or double sided tape. Cleanflight settings will require a change in cli with the following command: set_motor_pwm_rate=32000. I'm probably going to be buying more of these.

JG101 | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Jan 11, 2016

Awesome little fc. I have it in the wisp and it flies well. Flashed it easy first attempt, and set up was also a breeze. The solder pads are close, but if i can do it (barely can see that small stuff lol) then everyone can. Only issue I have is that I want them too release this with 8 esc, because I'm greedy for motors, and I really want to make a lego octoX lol.

Soldier2580 | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Jan 04, 2016

Really convenient FC. Very lightweight, powerfull ESC's, built-in Rx and Cleanflight support. Takes a little while to setup PID's correctly, but flies great now! Recommended

DodgeHobby | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Dec 30, 2015

First dabble into micro quads, cracking little board, enough information out there to get you started. Overall about 2 days worth of research and tinkering to get the Wisp 110 flying! Will post up Cleanflight settings etc in the files section soon
All up 40 and flying!

Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!