Nós viemos com este urso (?) Versão fuselagem do imensamente popular Rarebear Funfighter para os pilotos que desejam ter seu próprio esquema de cores e se adequar à sua própria escolha de servo de e ESC. O motor de estoque muito importante e extremamente impressionante tenha sido pré-instalado e o spinner e 3 x adereços estão todos incluídos, como é o hardware.
Sem decalques para remover, esta versão é perfeito para aqueles que talvez querer pintar um esquema de escala, por exemplo, um F8F Bearcat e também é ideal para os loucos de velocidade que querem pintar o seu próprio personalizado, esquema brilhante para corridas de pilão, etc, esta é a resposta perfeita para os amadores que querem construir o urso final!
Não decalques para remover, ótimo para pintura
Poderosa Outrunner Motor pré-instalado
Todo o hardware incluído
Prop & Spinner incluído
De carbono reforçado Asa
Envergadura: 620 milímetros
Comprimento: 535 milímetros
Peso do vôo: 345g
Prop: 5.5x4.5 (3pc incluído)
Motor: 2825-1950kv Motor sem escova outrunner (Incluído)
O seu próprio transmissor e receptor
3s 850mAh ~ 4s Lipoly bateria
3 x Servo 9g
30A ~ 40A ESC w / BEC
Características do Produto
Capacidade ( mAh)
Peso ( g )
I haven't flown it yet, however, I got this plane in the mail 3 days after ordering it, and it's exactly what I expected. It feels sturdy. Although built somewhat careless (ie large blobs of glue on the carbon wingspar, inside the fuse), it's fine. The supplied linkeage has some backlash, which isn't too bad for my purpose.
I bought this plane as a fun/dogfighter with a high probability of midair collissions and such.
Built it with old stuff I had lying around. The setup:
2x Graupner C261 on ailerons (8 grams micro)
1x Hitec HS-81 on elevator (19 grams, so too heavy, too strong, but only thing I had spare)
Robbe Roxy 35A Brushless ESC
Orange FASST receiver
Hacker Eco-X 900mAh 24C
I was really surprised to see the AUW (including battery): 347 grams. Only 2 gram above specification! Also, the CG was spot-on without any adjustmends needed.
Although the engine doesn't seem to pull hard statically, we'll see how she handles in the air.
Al in all a nice little kit. If you are more serious about performance, I would advice using different linkage.
It can be glued using ZAP medium CA and kicker.I fly mine with a 40A ESC and (for now) the motor off a RadJet800 as the kit came with a broken motor. It was blocked by something, I took it apart and found blue glue (magnet?)resin in abundance. I tried to get this out as good as it gets but it was way out of balance afterwards. Ordered a new motor. Even with the 1850kV RadJet motor it goes very very fast on a 4S 1000mAh lipo. Only 3 min of fun before its all empty. It tends to make the standard prop oscillate (screaming), maybe I will need to fit a stiffer prop someday.
You better paint your 'Bear in bright colours or you will not be able to see where it goes at speed.
Only 4 stars because of the motor, but an awesome and fun plane!super schon mit 3s. Nur die Querruderanlenkung ist etwas billig, unbedingt ersetzen oder besser sichern
These are very good value for money there is at least 10 members in our club that use the fun fighters so it's like wacky races...quite easy to repair with cyno when we collide as we often do.Great plane that tracks incredibly fast and straight. Having the choice of a colour scheme is a great idea. Still, spares and a decal set should be offered too. The manual should have a hint to attach the elevator clevis before gluing the vertical fin :) 4 stars for quality because of the many nips and dents in the foam and the need to sand and shape to make the canopy fit. Also the diagonal foam bits in the battery compartment are just in the way and needed to be cut out. The listed CG of 30mm sounds nose heavy. Mine flies just fine with 45mm CG. Also the propellers need balancing. This would probably save the motor mount from rattling loose. Control horns could be a better system. Would I buy it again? YES!Fun Fighter is the right name of it. It makes so many fun for little money.
Awesome piece of kit. Fast and stable even in a high crosswind condition. The hardware pack leaves a bit to be desired though. But definately worth a purchaseNice, not very cheap (cause there is nothing in it but the motor).
Used Turnigy Servos, HK 30A ESC, and Orange RX.
Crashed it in maiden flight. Now it is gone forever :(
Not recommended for beginners.
Spare parts not available (would need the wings, one wing is still somewhere over in the trees).
After all I think, this kit should be ok, but the price is rather high for Hobbyking.
Echt een fijn snelheids monstertje heb er nu al 3 gekocht omdat ik ze gewoon opvlieg
Geen aanrader voor beginners maar voor gevorderden vliegers ,als je hem in gaat vliegen doe dat dan op 3s hij is heel gevoelig op alle uitslagen dus maak deze niet te groot echt minimaal houden als je aan het kistje gewend ben gooi dan maar eens een 4s erin en wees klaar voor hoge snelheden
Echt een top dingThis plane is tha bomb. Way faster and more stabile than any of my EDF jets. Use a Turnigy Plush 30A, Turnigy digital MG servo's, AS3X stabilization at 30pcnt gain to eliminate any wind effect, and 1000mAh 4S 40C batteries. Made exhaust-pipe shaped cooling outlets at the back of battery compartment, this works (made from Trex450 tailpipe). I'm addicted and happy. Thanks HK for a good deal.
Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!Customer files
No File Name download now [1292kb] No File Name download now [118kb] No File Name download now [137kb] No File Name download now [703kb] No File Name download now [56kb] HighVisColor download now [299kb] No File Name download now [2710kb] my paint job download now [4.00Mb] my pain job bottom download now [4.33Mb]