Esta pequena BAE Hawk é incrível, EPO espuma combinados com suas estatísticas pluma significa que será muito indulgente do desembarque estranho inferior a 100%. A ventoinha da unidade e ESC 35 milímetros são pré-instalados como são os aileron e elevador servos, o modelo vem em 2 peças para tudo que você tem que fazer quando se chega é anexar o estabilizador vertical, ligar o equipamento de RC a um Receptor que usa Micro Molex 3 conectors Pin, como o HobbyKing OrangeRX 4 Channel Micro receptor e você está pronto para ir ...... onde estávamos? Ah sim, realizar os famosos Red Arrows acrobacias no parque local, quadra de basquete, na verdade muito bem em qualquer lugar, estes modelos são uma buzina absoluta quando voado com os amigos, na verdade me canso de você juntos e ver se você pode retirar alguns dos aqueles de tirar o fôlego formação próxima da rotina as setas vermelhas são famosos por!
A caixa o modelo chega em é realmente útil para não transportar apenas o modelo para evitar cabide de erupção, mas os bolsos peças em espuma de embalagem são ideais para a realização Lipolys peças e você vai se divertir muito com isso, eu iria levar alguns! Este falcão é tão bonito, até mesmo a sua esposa vai gostar!
Envergadura: 363 milímetros
Comprimento: 431 milímetros
Voar Peso: 95g
Área Wing: 2.35dm2
Asa Loading: 40,4 g / dm2
EDF: 35mm com 9000kv Brushless Outrunner Motor
ESC: 6A w / BEC
Servo: 3 x 2 g
3 Blade Fan Rotor
Livro de instruções
Sua própria 4 Channel TX / compatível com 1,25mm Molex de 3 pinos conectores)
Bateria 7.4v 450mAh 2s Lipoly
Características do Produto
Peso ( g )
Very nice looking Hawk but needed a few modifications. I run this on 3S 450 gensace lips and a H-King 10a esc. Very nice power but didn't try it on 2s. The Aileron control horns needed some glue and tightening and the cockpit is missing the pilots (lol). It's fun to fly but needs a big hard throw to get it movingVery cool micro edf. Hand launching takes a bit of practice but a nice firm toss about 45 degrees gets it up ok. Running stock setup and flys well and straight. Orientation is a bit hard at a distance as it's all red. Max throws for elevator as it is very small and set minimum throws on ailerons as it is very responsive and can be very twitchy at full throttle.
Overall a fun, small and great sounding little edf.Wow I like this T45. I have the red Bae Hawk version, not the white Gosh Hawk scheme. Mine came out of box lovely but had to do sum surgery to get it sweet. I noticed that one of the aelieron servos didn't have tape on it like the elev and other aelieron servo, on closer inspection it is different so I ashume it should be the elev servo and was put in the wrong spot on assembly line. No matter I swapped the right one into aelieron spot and used a turnigy digital 4g servo for elevator after freeing up the rods and running in the epo hinges, much freeier action. I also made little plastic washers for the control rod links to the horns to take out the freeplay. Shortened all the wires and removed some plugs too, but still with a nano tech 2s 350mah my auw (all up weight) is 120g. It shore makes good thrust testing so maiden shortly, then might go 3s setup and try getting auw down a bit more. Too happy can't wait, I have the twin A10 35mm too, it was heavy but flys excellently like a bigger plane.Very powerfull jet. It's my first one, and I'm in love with it. I fly with my nanotech 300mah or 450 2s lipo.Very beautiful jet to fly!!!!this little red arrow looks very nice and even has 2 little pilots in it,sadly flight wise it is very under powered on the 2 cell set up and barley has enough thrust to stay airborne,will do rolls but forget loops,also it does not like wind at all and get thrown around but this maybe to do with the lack of power again,3 cell is the only way to go with this if you want it to lastok otimo produto estou no aguardo me recomendaroA cute little model. Mine arrived with slightly warped tailplane halves. Easily straightened and strengthened by cutting slots in the underside and inserting some flat carbon strip. Did the same on the wing to prevent flex. Hoping that the extra stiffness will make the model groove better. Fitted a dsm-x 6 CH. Rx and 2s 460 turnigy battery. Had to remove foam in the battery bay to get everything in. Cg was spot on with this set upJust received my Hawk from UK Warehouse. Please note that it now has NORMAL SIZE type servo plugs and not the Micro Molex type as described above. It also has servo wire extenders, not good in such a small space. The elevator works through snake/wires and the servo does not have enough power to overcome the friction, so I have installed a slightly larger servo. Having got a RX that is compatible with the micro plugs specifically for this model the size of the plugs and extension wires is a major spoiler. The receiver was ordered and included at the same time, no comment from HK, sad really that they make this type of error.Mine also arrived this morning with standard servo connectors. Lovely looking plane. But don't tell the wife coz I'm not supposed to see it till Christmas :). Could someone tell me if there is supposed to be something under the nose of this plane as mine has a small square slot?
Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!