New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

RoboStar SBRS-5314HTG 280 ° Metal Gear Digital High Voltage Robot Servo 53,1 kg / 0.14Sec / 81g

RoboStar SBRS-5314HTG 280 ° Metal Gear Digital High Voltage Robot Servo 53,1 kg / 0.14Sec / 81g

Shipped From:
  • International (Hong Kong)
QTY:

Now save guardar 0,00 € 0,00 €

35,39 €
Already Purchased
Estado:
Backorder
SKU:
9220000046-0
ETA:
No ETA At This Time [ ? ]
WANT FREE SHIPPING? Click here to find out more!

O robô servo RoboStar SBRS-5314HTG é embalado com características que oferece o melhor para os usuários do robô. Este servo de engrenagem de metal resistente é perfeito para o seu robô personalizado ou outro projeto de automação. O caso dissapate calor e características de plástico e liga de metal com rosca de montagem furos para os parafusos da máquina. O motor de alta potência brushless oferece amplo poder de mover e precisão para seu projeto. Este servo RoboStar pode aceitar tensões tão elevadas como 11.1V, a 3S Lipo!

Cada servo inclui uma ligação removível de entrada do fio que se conecta diretamente ao lado do caso, bem como rodas de plástico e servo liga.

Características:
• Torque elevado
• alta precisão, todas as engrenagens de metal, rolamento duplo
• Boa dissipação de calor
• âmbito de rotação: 0 ~ 280 °
• Aceita altas tensões até 3S 11.1V Lipoly
• condutor de entrada removível para cablagens personalizado
• alta potência, motor brushless Superconfiável

especificações:
Saída: Single
Tensão de funcionamento: 7.4 ~ 11.1V (2 ~ 3S Lipoly)
Velocidade de operação: 0.18Sec / 60 ° / 0.14Sec / 60 °
Stall Torque: 32.4kg.cm /53.1kg.cm
Âmbito de rotação: 0 ~ 280 °
Tamanho: 43X32X32.5mm
Peso: 81 g
Spline: 25T
Rolamento de esferas: 2BB
Engrenagem: Metal
Fio Comprimento: 50 centímetros
Padrão Parafuso: 21.5x21.5mm
Freqüência de operação: 1520us / 333Hz, 900 ~ 2100us

Parafuso de montagem é de 3 mm

  • SKU 9220000046-0
  • Brand RoboStar
  • Peso 150.0000
  • Comprimento 110.00
  • Packaging Width 40.00
  • Altura 60.00
  • Torque ( kg) ( min. 0,01 kg ) 53.10
  • Speed ​​( Sec / 60deg ) 0.14
  • A ( mm ) 31.00
  • B (mm) 38.00
  • C ( mm ) 27.00
  • D ( mm ) 27.00
  • E ( mm) 0.00
  • F ( mm ) 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I've bought lots of these servos, and they are the best I've ever found. Especially great is the idler wheel on the opposite side of the motor from the output shaft, which allows you to make a really solid robot joint. They move very smoothly and fast, and sit quietly at whatever position you send them to (unlike a lot of RC servos!). Some suggestions to the manufacturer: Make the servo case out of all-aluminum. The plastic which holds the rear bearing on the output shaft cracks under very high torque. I've cracked several of them running at 8.4 Volts, and then the shaft can move out of position and the gears skip. Incidentally, the gears are very good and survived all the skipping without damage. Plus, I would like this motor to be made available in a larger size/torque and a smaller size/torque, so they can be distributed in diminishing size along a robot arm.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've bought lots of these servos, and they are the best I've ever found. Especially great is the idler wheel on the opposite side of the motor from the output shaft, which allows you to make a really solid robot joint. They move very smoothly and fast, and sit quietly at whatever position you send them to (unlike a lot of RC servos!). Some suggestions to the manufacturer: Make the servo case out of all-aluminum. The plastic which holds the rear bearing on the output shaft cracks under very high torque. I've cracked several of them running at 8.4 Volts, and then the shaft can move out of position and the gears skip. Incidentally, the gears are very good and survived all the skipping without damage. Plus, I would like this motor to be made available in a larger size/torque and a smaller size/torque, so they can be distributed in diminishing size along a robot arm.

These are amazing servos for the money. I purchased mine for a robotics project because I needed something with high torque, high speed, and a sturdy metal drivetrain. It also had to fit inside Actobotics channel, which it does perfectly. I also like that it uses a brushless motor.

The build quality is Chinese standard, meaning they do things like hot glue the header plugs into place. This, however, works to the advantage of anyone that wishes to move the location of the plug exit. If you go to the Thingiverse website and search for RoboStar, you'll find a new bottom plate that lets you do just that.

If I had to complain about this servo, I'd wish for larger mounting holes. For those curious about hardware sizes, the mounting holes for the servo itself take puny little M2 screws, as do the servo horn holes. The servo horn itself attaches to the servo with an M3 screw. The splines for the horn are Futaba 3F standard, and Actobotics hub horns will fit nicely.

So far I love these. Let's hope they hold up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are amazing servos for the money. I purchased mine for a robotics project because I needed something with high torque, high speed, and a sturdy metal drivetrain. It also had to fit inside Actobotics channel, which it does perfectly. I also like that it uses a brushless motor.

The build quality is Chinese standard, meaning they do things like hot glue the header plugs into place. This, however, works to the advantage of anyone that wishes to move the location of the plug exit. If you go to the Thingiverse website and search for RoboStar, you'll find a new bottom plate that lets you do just that.

If I had to complain about this servo, I'd wish for larger mounting holes. For those curious about hardware sizes, the mounting holes for the servo itself take puny little M2 screws, as do the servo horn holes. The servo horn itself attaches to the servo with an M3 screw. The splines for the horn are Futaba 3F standard, and Actobotics hub horns will fit nicely.

So far I love these. Let's hope they hold up.

Customer files
ABRS-5314HTG+HVFULL datasheet Download [239]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking