New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

RotorBits Servo Mount Set w / engrenagem (verde)

RotorBits Servo Mount Set w / engrenagem (verde)

Shipped From:
  • International (Hong Kong)
QTY:

Now save guardar 0,00 € 0,00 €

5,68 €
Estado:
Disponível
SKU:
171000395-0
WANT FREE SHIPPING? Click here to find out more!

Só porque você pode ter superado seus conjuntos de Legos e Erector não significa que a diversão tem que parar. Apresentando RotorBits, o conjunto de construção modular de infinitas possibilidades. Com base na idéia de conexões padronizadas e dimensões, o único limite para o que pode ser construído é a sua imaginação.

RotorBits podem ser reciclados e reutilizados em outras criações, misturar e combinar diferentes pedaços para fazer uma Y6 ou Bi-Rotor! Como sua coleção de Bits cresce e conceitos evoluem com plug & play fácil, quem sabe o que pode vir acima com? Tem competições de clubes para ideias criativas ou raças para a caixa mais rápida de ar constrói. RotorBits é uma ideia que nunca pode ser ultrapassada única reconfigurado.

RotorBits Servo Mount Set w / engrenagem (verde)

especificações:
Tamanho (CxLxA): 84 x 30 x 18 mm
Orifício de montagem do tubo: 10 x 10mm
Placa Servo (CxL): 24 x 23,5 milímetros
Servo Apator: 21 Teeth
Motor de montagem Hole: 17 milímetros (buraco em buraco)
Peso: 39,1 g
Cor: Preto

  • SKU 171000395-0
  • Brand RotorBits
  • Capacidade ( mAh) -
  • Peso 48.0000
  • Comprimento 60.00
  • Packaging Width 20.00
  • Altura 50.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Lot of play added to the servo play it's pretty difficult to get the tricopter holding the tail directtion more than 10 seconds.

Beaucoup de jeu dans le mécanisme, si on rajoute le jeu du servo ça devient difficile de garder le cap pendant plus de 10 secondes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Lot of play added to the servo play it's pretty difficult to get the tricopter holding the tail directtion more than 10 seconds.

Beaucoup de jeu dans le mécanisme, si on rajoute le jeu du servo ça devient difficile de garder le cap pendant plus de 10 secondes.

Works great is strong but there is a small amount of slop however. But if you fix and tweet it enough you can fix that

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works great is strong but there is a small amount of slop however. But if you fix and tweet it enough you can fix that

Nice Servo Mount for building the Tricoter

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice Servo Mount for building the Tricoter

fitting for motor mount / axle is bad, have to be glued in. Screws are poor quuality. fitting for servo gear could be more universal - using the HK-15178B Digital MG Servo its fine, but the servo mount dont fit. Will taper the axle for using ball bearing, for softer working.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

fitting for motor mount / axle is bad, have to be glued in. Screws are poor quuality. fitting for servo gear could be more universal - using the HK-15178B Digital MG Servo its fine, but the servo mount dont fit. Will taper the axle for using ball bearing, for softer working.

Just revceived my rotor bits and can say they are of good quality and I am
very pleased.Took a bit of time to get the servo to sit just right but at the price I certainly can not complain.Thanks hobbyking another good product
at a great price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just revceived my rotor bits and can say they are of good quality and I am
very pleased.Took a bit of time to get the servo to sit just right but at the price I certainly can not complain.Thanks hobbyking another good product
at a great price.

All of these are to small, try building a hex or octo and you will see what I mean. 10mm x 10mm inside hole measurement is just way to small. You Rotorbits people need to make these with 12.5mm holes and 15mm hole to make larger applications stronger. If these Rororbit parts had larger inside holes to fit the booms and arms we fliers use these would sell more. The Tri Copter yaw mechanism is a great idea but just to small to use on anything else but Rotorbits arms and most of us will not use arms and booms with that small of a diameter....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

All of these are to small, try building a hex or octo and you will see what I mean. 10mm x 10mm inside hole measurement is just way to small. You Rotorbits people need to make these with 12.5mm holes and 15mm hole to make larger applications stronger. If these Rororbit parts had larger inside holes to fit the booms and arms we fliers use these would sell more. The Tri Copter yaw mechanism is a great idea but just to small to use on anything else but Rotorbits arms and most of us will not use arms and booms with that small of a diameter....

I like these Rotor Bits.

Very high quality of the pieces I have so far used.

Fast can your innermost multirotor dreams be realized.

The only small downside so far is that the yaw mechanism need some glue between the plastic and outer shaft.

If you don't have access to a complete mechanic workshop these things are awesome.:)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I like these Rotor Bits.

Very high quality of the pieces I have so far used.

Fast can your innermost multirotor dreams be realized.

The only small downside so far is that the yaw mechanism need some glue between the plastic and outer shaft.

If you don't have access to a complete mechanic workshop these things are awesome.:)

Customer files
exploded view of rotorbits servo mount Download [234]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save