Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Helicóptero RotorStar RS-1253MG Digital cíclica Servo 29g / 4,8 kg / 0.09sec

Generating Links

Helicóptero RotorStar RS-1253MG Digital cíclica Servo 29g / 4,8 kg / 0.09sec

Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9068000005-0
Envio Grátis? Clique aqui aprender mais!

Se você está procurando um servo cíclica de alto desempenho com qualidade para corresponder para o seu 500 tamanho heli, temos apenas a coisa!

O RotorStar RS-1253MG é um servo digital tamanho parque com uma caixa da liga heatsinked, geartrain de metal cheia, motor sem núcleo e um tempo de trânsito rápido 0.09sec. Acrescente a isso o seu excelente desempenho e enganou fora aparência, e você tem um servo excelente para o preço!

Perfeito para o HK500, Trex 500 e muitos outros helis 500 de tamanho no mercado hoje.

especificações:
Modelo: RS-1253MG
Tensão de funcionamento: 4.8V / 6.0V
Velocidade de operação: 0,10 sec.60 ° / 0.09 ° sec.60
Stall Torque: 4.2kg.cm / 4.8kg.cm
Tamanho: 35x15.1x29.5mm
Peso: 29 g
Motor: Tipo de Coreless
Rolamento de esferas: Sim
Caixa de velocidades: Metal Gears
Fio conector: 250 milímetros
Ligue: JR

  • Servo Torque ( kg) ( min. 0,01 kg ) 4.80
  • Servo Speed ​​( Sec / 60deg ) 0.09
  • Servo A ( mm ) 34.00
  • Servo B (mm) 35.00
  • Servo C ( mm ) 30.00
  • Servo D ( mm ) 15.00
  • Servo E ( mm) 48.00
  • Servo F ( mm ) 20.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Registre-se para escrever comentários, por favor assinar em ou registar

| Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Dec 03, 2015

have to trie them first before review, looks nice packed

diego82 | Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Nov 07, 2015

I use tis servo for a 500 size hely. Fast enough for my need. Good price!

hui_son2005 | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Mar 18, 2015

Hi , i use this in my SebArt Mythos-70e two in the stab and 2 in the aileron , centering well for precission flying ,speed is fast enough ..price is right too ..!!
earlir i have the Aligh 515 , same spec with this rotor servo but the speed is more faster and respon is better than Aligh servo !! Overal is a good buy , i recommand buying this ..!

Donkeydoctor | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Aug 12, 2014

These are really good servos. I use them on my mostly alignized FL HK 500. At first I noticed there was a bit of overshoot, and then I noticed it wasn't because of the servos, it was because the tail boom of the helicopter twisting around towards the ground. When the helicopter is set up properly, these servos work fantastic for hard 3d at 2650 RPM. 4 stars on value, because I cannot find replacement gears for these servos. Once you strip a gear, you have to buy a new servo. All I can find is that these servos are probably made by Savox, and they do not sell these servos, or any version of this servo, which means we're not likely to see replacement gears any time soon.

| Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Mar 30, 2014

Good quality and reasonable price!!!!!!

adfasdf | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Feb 25, 2014

I am using these as cyclic servos in an Align T-Rex 500 ESP converted to flybarless with an Align 3gx (and also converted to belt drive). These are replacing the original Align DS510s that came with the kit which were pretty mangled due to a really bad crash.

Two of the three Rotorstar servos had zero slop, but one had a little give. They all centered well and move at the same speed. There is no hunting in any of the servos. The gears are all metal. They are at least as precise as the DS510s and the splines are compatible with the DS510s servo arms. I have had 4 flights so far and the servos have given me no trouble and are more than fast and strong enough for sport flying/ light 3d. Overall I am happy with the purchase so far. The only reason I am giving an overall rating of 4 stars is due to the slight slop in one of the servos.

slider16 | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Dec 03, 2013

Worked just fine out of the tin case. Specs for size and weight are correct. Takes 25 tooth servo horn (futaba servo saver fit on perfect) and has a 26cm servo lead. Very quiet running with both servo tester and radio bench test (at all frame rates). No gear train slop at all. Going to use as a 1/12 scale steering servo. Now to figure out what to use the cool tin case for...

Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!