Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

RotorStar ™ RS-2125MGC helicóptero cíclica DS / MG Servo 2,6 kg / 0.09sec / 14,2 g

Generating Links

RotorStar ™ RS-2125MGC helicóptero cíclica DS / MG Servo 2,6 kg / 0.09sec / 14,2 g

Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9068000001
Envio Grátis? Clique aqui aprender mais!

Se você está procurando o servo cíclica final para o seu tamanho 450 heli, temos apenas a coisa!

O RotorStar RS-2125MGC é um mini servo micro / tamanho digital que caracteriza um geartrain de metal, motor sem núcleo e um tempo de trânsito rápido 0.09sec. Acrescente a isso a excelente performance e fora enganado aparência, e você tem um servo excelente para o preço!

Perfeito para o HK450, Trex 450 e apenas sobre qualquer outro 450 tamanho heli no mercado hoje!

especificações:
Modelo: RS-2125MGC
Tensão de funcionamento: 4.8V / 6.0V
Velocidade de operação: 0,12 sec.60 ° / 0.09 ° sec.60
Stall Torque: 2.2kg.cm / 2.6Kg.cm
Trabalho Freqüência: 1520μs / 333hz
Tamanho: 22.8x12x25.6mm
Peso: 14,2 g
Motor: Tipo de Coreless
Rolamento de esferas: Sim
Caixa de velocidades: Metal Gears
Fio conector: 180 milímetros
Ligue: JR

  • Servo Torque ( kg) ( min. 0,01 kg ) 2.60
  • Servo Speed ​​( Sec / 60deg ) 0.09
  • Servo A ( mm ) 29.00
  • Servo B (mm) 23.00
  • Servo C ( mm ) 26.00
  • Servo D ( mm ) 12.00
  • Servo E ( mm) 33.00
  • Servo F ( mm ) 17.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Registre-se para escrever comentários, por favor assinar em ou registar

frankyboy | Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jan 17, 2016

super servo toutes en metal tres rapide .spcialement dvelopp pour les rotor flybarless.s'instale tres facilement sur hlicoptre de grosseur 400 ou 450 moi je les ai instaler sur une hk 450 et ils sont sur la king cochemerci hobbyking!!

Hamlett | Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jul 29, 2015

You can see the quality all round a fine servo which I could use them on all my models.

Autotechnica | Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jul 18, 2015

I bought this as a replacement for a 450 servo that went bad. The bad one was this same servo. There was tiny piece of metal shaving from the gear that got jammed causing the servo to overheat and cause a short. My 3GX controller kept resetting and causing a crash. I opened the servo up, cleaned it and now it functions properly. Even though these servos work well and are pretty cheap given their performance, I would open up all the servos, clean the gears, re-grease and make sure they run smooth with no binding or too much friction. Otherwise, you can't beat the price. They are as good as align servos, but because of the price I guess quality control sometimes is affected. No big deal, just check the gears before you install them.

Dolfie | Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jun 09, 2015

I bought these for the swash of my 450 what a difference no more rocking from side to side. I had the HK 922MG they did not do the job. There is very little play in the gears.

Log123Log | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Sep 05, 2014

Good value for money.

Elevator servo on my 450 began to jitter after 200 flights, replaced it.
Gears are ok. Heli had some lighter crashes, so it's OK!

Overall a good servo. Will order a new spare one.

| Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Aug 08, 2014

Perfect, good product and cheap!

closedsink | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Jul 08, 2014

These were great at first, but after maybe 25 flights on my 450 (used them for cyclics), they all developed the same weird behavior. When moving from endpoint to endpoint, they would change speed when crossing through the center point. All 3 servos did this. This resulted in control problems with the heli. They were not crashed. I took them apart, but gears all look fine. I suspect an issue with the pots. Won't be buying these again.

Ben | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Jun 26, 2014

These are truly excellent servos. Very quick response time even at 4.8 volts, loads of power and holding torque, best servos I've ever purchased. Using them as an elevator servo for a 180 degree rotation all-flying stabiliser on a LeFish glider, and also as a tail servo on a tricopter using the Rotorbits tail mechanism. Both applications work really well. Highly recommended.

Atoniollo | Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Apr 29, 2014

Servo bom e rapido... Porem com engrenagens muito ruins... o meu 450 teve uma micro lenha. so deitou e la se foi as engrenagens... e o pior nao tem engrenagens a venda...

vincent | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Feb 21, 2014

I use this on the gaui X2 as cyclic servos. So far, the gear slop is fine. The servo height is lower than the regular size which is good for my application. They work fine so far. I m happy with it.

Arquivos de clientes
rs-2125mgc 450 dfc Download [272]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!