New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Kit AAI RQ-7 Sombra FPV 2.000 milímetros Laser Cut

Kit AAI RQ-7 Sombra FPV 2.000 milímetros Laser Cut

Discontinued Product

Please continue searching for a similar product.
SKU:
9099000065-0
WANT FREE SHIPPING? Click here to find out more!

Na vida real, a AAI RQ-7 Shadow é um UAV campo de batalha usado pelas forças armadas da Austrália, Itália, Suécia, Estados Unidos e outros para fornecer um reconhecimento, vigilância e como uma plataforma de aquisição de alvos.

Mais de 500 RQ-7 Sombras estão em uso operacional em todo o mundo transportando sensores de imagem de infravermelhos / eletro-ópticos e com uma gama de mais de 100 km e um tempo de permanência na área 4 horas on-alvo. As especificações também exigiu o UAV para ser capaz de pousar em um campo de esportes.

Nossa RQ-7 Sombra não pode oferecer uma duração 4 horas ou um intervalo 100km, mas é certamente uma plataforma FPV fantástico com todas as características altamente práticos do tamanho completo, incluindo a cauda V invertido aerodinamicamente comprovada, layout de crescimento duplo, montada ao centro do motor empurrador, trem de pouso triciclo fixo eo enorme nacela central, dando uma visão clara para as suas câmeras e sensores.

Para os entusiastas de escala entre nós o kit constrói em muito uma representação precisa do tamanho total de Sombra e, em 2000 milímetros envergadura os entusiastas de grande escala não vai ficar desapontado quer como este é quase 1/2 escala!

O kit possui um conjunto completo de componentes, corte a laser, da mais alta qualidade e balsa ply para fazer a construção o mais rápido, preciso e agradável possível. Um pacote de acessórios completo, deixando-o com adesivos e material de cobertura para fornecer a fim de terminar o modelo.

Características:
• plataforma FPV altamente capacitados
• peças cortadas a laser Accurate
• construção balsa Qualidade e contraplacado
• pacote de acessórios completa
• Fácil de seguir o manual
• capacidade de carga Grande
• Trem de aterragem incluído

especificações:
Envergadura: 2,000 milímetro
Comprimento: 1.630 milímetros
Peso do vôo: 3200 ~ 4000g
Rádio: mínimo de 4 canais
Motor: 2820 900-1100KV brushless outrunner
ESC: 60A
Hélice: 12 x 6

Requeridos:
gear 4 Channel RC (mínimo)
2 x 17g servos
2 x servos standard
bateria 5000-10000mAh 4S LiPoly
2820 900-1100KV motor brushless
60A ESC w / BEC
Cobertura
Adesivos
Escolha do equipamento FPV (opcional)

  • SKU 9099000065-0
  • Brand Other
  • Peso 3971.0000
  • Comprimento 880.00
  • Packaging Width 180.00
  • Altura 340.00
  • IC / 2: Elec -
  • Motorsize ( diam -ou- cc) -
  • Envergadura 2000.00
  • Length(mm) -
  • SaleWeight ( g ) -
  • Capacidade ( mAh) -
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Don't get me wrong I'm having fun building the RQ-7, but there are problems with the model.

the mounting points for the landing gear are drilled in the wrong place, and the hole in the wheels are too small to fit the shafts, they have to be drilled out.
some parts need the tabs modifying because they not match the holes in the appropriate panels ( B13 & B14 where they fit into A2 if any one cares)
and other panels aren't big enough so you need to buy a little bit of extra sheet. finally i was missing some of the balsa wood strips for the wings

Sorry if thats all a bit negative they are relatively small things and i got all the extra balsa i needed for less that 10.

the plus point which is a huge one is that the body of the model has a massive easily accessible bay for mounting FPV cameras and gimbals and theres a cut out near the nose that can be easily modified to house a downwards viewing camera for mapping.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Don't get me wrong I'm having fun building the RQ-7, but there are problems with the model.

the mounting points for the landing gear are drilled in the wrong place, and the hole in the wheels are too small to fit the shafts, they have to be drilled out.
some parts need the tabs modifying because they not match the holes in the appropriate panels ( B13 & B14 where they fit into A2 if any one cares)
and other panels aren't big enough so you need to buy a little bit of extra sheet. finally i was missing some of the balsa wood strips for the wings

Sorry if thats all a bit negative they are relatively small things and i got all the extra balsa i needed for less that 10.

the plus point which is a huge one is that the body of the model has a massive easily accessible bay for mounting FPV cameras and gimbals and theres a cut out near the nose that can be easily modified to house a downwards viewing camera for mapping.

Very nice kit. 3 days for shipping from NL to FR. Parts are ready to be glur, just need a sharp knife. think about have 4m of 3mm x 3mm and 4m of 6mm x 6mm paulownia wood to complete this kit. Some hole wasn't at the good place but its very easy to correct that. perform a test before use glue, especialy for the landing gear D3 parts and for the tail tube in wing (parts D2, D4 and A12). After assembly, dry weight is above 1400gr. I will use glow .46 engine, I think its the better way for handsome look and nice flight time.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice kit. 3 days for shipping from NL to FR. Parts are ready to be glur, just need a sharp knife. think about have 4m of 3mm x 3mm and 4m of 6mm x 6mm paulownia wood to complete this kit. Some hole wasn't at the good place but its very easy to correct that. perform a test before use glue, especialy for the landing gear D3 parts and for the tail tube in wing (parts D2, D4 and A12). After assembly, dry weight is above 1400gr. I will use glow .46 engine, I think its the better way for handsome look and nice flight time.

I love that I'm building this massive model for just over $100 dollars. I'm most of the way done building the fuselage and it's been a lot of fun so far. I don't know if I'll add electronics and try to fly it yet, I really wanted to try building a balsa model.

There is one big flaw however; the quality control at least on my model was not very good. Many of the balsa pieces are not laser cut through all the way so I'm having to trace the back of the balsa on the laser cut lines with an xacto knife to get them apart. Some pieces are so bad however that I can't even see the lines on the back, and the wood doesn't break cleanly if I try to snap the pieces. This is making getting some of the parts out extremely tedious. Most of the parts however are fine, this issue is just with a couple of sheets of parts which does translate into a lot of extra work.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I love that I'm building this massive model for just over $100 dollars. I'm most of the way done building the fuselage and it's been a lot of fun so far. I don't know if I'll add electronics and try to fly it yet, I really wanted to try building a balsa model.

There is one big flaw however; the quality control at least on my model was not very good. Many of the balsa pieces are not laser cut through all the way so I'm having to trace the back of the balsa on the laser cut lines with an xacto knife to get them apart. Some pieces are so bad however that I can't even see the lines on the back, and the wood doesn't break cleanly if I try to snap the pieces. This is making getting some of the parts out extremely tedious. Most of the parts however are fine, this issue is just with a couple of sheets of parts which does translate into a lot of extra work.

Customer files
Manual Download [2356]
AAI RQ-7 Shadow Manual Download [2356]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking