Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

RX3S OrangeRX 3-Axis vôo Estabilizador

Generating Links

RX3S OrangeRX 3-Axis vôo Estabilizador

Preço:

Now save economize 0,00 € 0,00 €

14,53 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9171000102
Envio Grátis? Clique aqui aprender mais!

Utilizando uma única alta precisão de 3 eixos MEMS giroscópio, o OrangeRX 3 eixos vôo Stabilizer é capaz de estabilizar vôo em praticamente qualquer aeronaves de asa fixa! Ele oferece maior estabilidade, corrigindo automaticamente os canais de aileron, profundor e leme em vôo. Isso compensa alterações indesejadas de atitude do avião devido ao vento e outros fatores. Em suma, ele faz o seu avião muito mais estável em vôo!

O OrangeRX 3-Axis vôo Stabilizer é ótimo para aqueles que tendem a voar em condições de vento, uma vez que irá compensar as rajadas de vento que normalmente empurrar o seu modelo ao redor. É também um add-on ideal para o seu modelo FPV favorito para mantê-lo no reto e nivelado durante o vôo.

Esta unidade é muito simples de instalar e usar. Os ajustes de ganho ajustáveis ​​são pré-definida para 50% oferecendo estabilização suave. Você pode facilmente ajustar o ganho para cada canal como desejado para aumentar ou diminuir a compensação para o respectivo canal (AIL, ELE, RUD).

Porque nós projetar, testar e fabricar essas unidades completamente interno (de 3D / 2D desenho de materiais sourcing, montagem etc. final) que pode controlar completamente a produção e garantir a consistência do produto, desde a concepção até ao envio do produto para você. Além disso, a remoção de meio-homens significou podemos conduzir melhor valor para o mercado e varejo estas unidades na fábrica (nossos) preços!

Características:
Capaz de estabilizar vôo em praticamente qualquer aeronaves de asa fixa
Suporta vôo 3D sem comprometer a estabilidade
ajuste de ganho do giroscópio independente para aileron, profundor e leme
giroscópio de fácil acesso invertendo interruptores na frente da unidade
design de peso leve e compacto

especificações:
Tamanho: 51x32x14mm
Peso: 14 g
IC: Atmega168PA
Gyro: 3 eixos MEMS
Tensão de entrada: 4.8-6.0V
Interface de AVR: Standard de 6 pinos
Sinal do receptor: 1520us
Sinal para Servo: 1520us

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

Foxyy | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 17, 2013

Great gyro, cheaper than buying 3 individual gyros and works better. I haven't had any flutter with it unlike some other gyros. It is very easy to set up using the pots. I mounted it on a gyro pad to reduce vibrations.

WayToo | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Feb 06, 2013

This is the only Hobby King product I have ever given a 5 crown rating. I bought three of these because the price was good but i was very surprised at how well they worked. I put the first one in a Bixler for experimental purposes and found that once you get it set up correctly the airplane becomes almost unconditionally stable in any wind. It does take a little time and effort to adjust the gain settings and they are not the same. I have more gain on the rudder than the ailerons and a bit more still on the elevator but when I put the Bixler in level flight it will maintain level flight. These are not an auto pilot but they actually work and are very good if you fly in wind the way I do. Thumbs up.

Bill | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Feb 05, 2013

Excellent value, have 6 of these, some I am useing the 5v bec in the speed controllers and 2 i am using them coupled direct to a zippy Life 1100ma 6.6v rx batt, i do not know the voltage tolerances but presumed they would expect you could run them in conjunction with their own range of receivers, have had over 20 fiights on this set up and it has performed faultlessly, certainly makes you look a better pilot than what you actually are, one thing i know is when most have packed up because of windy conditions i am able to keep flying and i am only a very average pilot, only time will tell if i am running too high a voltage with the 6.6 volt but until then i am having alot of fun

Emmanuel | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 27, 2012

I never imagined flying in strong winds but my friend encouraged me to try. Not a pleasant experience. I bought this stabilizer to aid my flights. Initially i almost crashed had no clue how it worked. Now i have a good understanding and fly in very strong winds with hands off the radio. Cross wind landings are fun, crabbed all the way with hands off the radio and even touch down crabbed...lol

Just change the attitudes and it holds. I mostly use rudder and elevator and the plane flies fine.

Only thing bothering me was during no wind days had to manually disconnect the stabilizer else not fun. But with the V2 this is also resolved, already ordered the day it came in stock. Just waiting for it to come.

Dan | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 14, 2012

I bought 2 and I'm impressed by the design. One of the dip switches didn't work on the rudder, so I put that one in my little beater jet, the other one works fine. I need a few more and see there is a V2 for 3 dollars more, I think I will try the new one and a megapirate flight controller for my FPV. I have also use head lock gyro's with real time gain but you need 3 to do the same job....you do the math, lol.

Yaroslav07b | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 13, 2012

This is a great product i highly recomend this for your plane

s.l.oliver | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 09, 2012

The stabilizer is quite easy to install and logical to use. However, i am Not Super happy with the single aileron channel. There are ways to use it - but I do not like it !

Emmanuel | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 06, 2012

I tried it on my supercub LP with park 480 in winds 20-25 knots. It was fun. Initially took a while to get the hang of it but after that its been fun fun fun... I do not use aileron option and use only rudder (90pcnt gain) & elevator (75pcnt). Just set your attitude and the plane stays there. I do my approach in strong winds without even touching the controls. Its so much fun. Now i have ordered the newer model with remote option to switch it off.

Ben | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 01, 2012

While I wish there was more on HK's website about the technical aspects of this flight stabilizer, I have to admit that it is great in the wind. I was able to float my Bixler in 40 mph winds and thanks to this stabilizer, I had to do very little inputs on my transmitter.

Does a good job for aerial photography, the main reason I bought it. Would be 5 crowns if more documentation was available.

vargasesteban | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 29, 2012

Very nice product , be careful with the gain it is very sensitive and dont forget to order the extentions from fre receiver to this Gyro
they are MALE TO MALE http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=21758

Arquivos de clientes
ATmega168AP Download [608]
ITG3205 Download [1126]
No File Name Download [1447]
weight of board alone Download [741]
weight of case alone Download [649]
complete unit weight Download [782]
back of the board Download [769]
Orange Rx Manual R3 by MyCoolRC Download [145]
Larger Pic Download [127]
Larger Pic Download [109]
  1. 1
  2. 2
  3. 3
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!

Acessórios