Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

S2838-2800 Brushless Inrunner (2800kv)

S2838-2800 Brushless Inrunner (2800kv)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
175 g
SKU:
S2838-2800
Descrição
do

Motor Tamanho: 2838
RPM / V: 2800kv
Carga máxima: 22A
Max volts: 14.8v 2s ~ 4s
Max Watts: 300w
Resistência: 0.0500

Diâmetro: 28 milímetros
Frente Montagem Distância Hole: 16mm ou 19 milímetros
Frente Mount Thread Size: 16mm M2.5 / 19 milímetros M3.0
Diâmetro do eixo: 3,17 milímetros
Comprimento do eixo: 12mm
Pode Tamanho: 380
Tipo de ficha: 3mm Bullet-conector
Peso: 102g

Product
Specifications

Características do Produto

  • SKU:
    S2838-2800
  • Brand:
    Não
  • Peso ( g )
    175.00
  • Comprimento
    145.00
  • Largura:
    56.00
  • Altura:
    56.00
  • Kv ( rpm / v )
    2800.00
  • Correntes Max (A)
    22.00
  • Potência (W):
    300.00
  • Comprimento B (mm):
    38.00
  • Pode Comprimento D (mm)
    38.00
  • Max Tensão ( V)
    15.00
  • Shaft A ( mm):
    3.18
  • Unit Weight (g):
    102
  • Diâmetro C ( mm )
    28.00
  • Comprimento Total E ( mm)
    52.00
  • Resistência (MH ):
    0.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Only just bought this motor to stick in a small boat on 2200 3 cell didn,t last 10 minutes before going up in smoke waste of money for me
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Small motor leads. Dont use more that a 30/40a ESC of you risk burning her up
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ideal zum Aufr*sten eines MPX Easy Star 1 mit Luftschraube 5,5 x 4,5. Mit 2S, Strom 16A und Anf*ngertauglich. Zieht besser als der Original B*rstenmotor. Mit 3S, Strom 24A geht er senkrecht hier kommt Spass auf.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this motor and i am disapointed. I tried many different props from 4.1x4.1 to 6x.4 at 3s. The max load of 22A is rediculus! Even at 25A a got only 400gr of static thrust with a TGS 4.5x4.5. Do not try bigger prop because the Amperes go high and you will burn the motor. In my opinio this motor is heavy and inefficient.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got this to place in a Multiplex Easystar and was very well amazed on how balanced and smooth it runs, a great product at the price point and for sure something I recommend. My only concern is the stiff tiny leads out the bottom of the motor, but hey...no big deal.

Shaft requires a 3.175 collet if using this for a prop, be sure to get the correct size, a 3mm will not fit!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
best inrunner for your money, good for 1:10 cars little boats with 2-3s 32props. or micro speedflyer with 5,2x5,2prop..2-3s is good 4s is to high
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Again bough this motor very great full power output with low consumption and low temp thank hobby king
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Little pieerhouse!!

I used it as a replacement motor in an Aquacraft mini-alligator.

Completely bonkers.

It becomes some sort of howling water-missile when combined with a carbon 5.5x5.5. On 3s Doesn't run hot.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor came into a much bigger size box than it's size. Very well finish and smooth bearing. But no prop adapter or mounting screw.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great motor, used it as a replacement for my funjet (original motor was from a stryker F27C) - very nice unit
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Customer files
wrtgh download now [148kb]

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.