Here's another casualty of an over-enthusiastic delivery man!This little jet has a cracked nose cone - no problem for anyone willing to craft a new one from a small lump of balsa or foam. It might be possible to repair the existing vac formed item!This scratch and dent item will make a fantastic project for hopping-up with a Dr mad Thrust 64mm and 4 cells - works a treat!An excellent parkflyer sized EPO jet. The BAE Hawk EDF jet comes 90% pre-built, just include your own brushless motor, servos, ESC, battery and radio gear (Tx/Rx). You will need 3 x 9g servos, one for the elevator, one for the ailerons and one for the steerable nose wheel. Because the BEA Hawk jet is made from EPO, it is very resistant to breakage and will literally bounce in light crashes. The material is also easily repairable and quite flexible.
Wing Span: 990mm
Flying Weight: 630g
Motor: 2826 3200kv (Required)
ESC: 25A (Required)
Servo: 9g * 3pcs (Required)
Battery: 1600mAh 3S1P 20C Lipoly Pack (Required)
EDF Diameter: 70mm (Included)
Required:Your own TX & RX (with V-type mixing)
Motor: 2826 3200kv
Servo: 9g * 3pcs
Battery: 1600mAh 3S1P 20C Lipoly Pack
No warranty available for this item.
Item used as a display item only.
Please do not ask questions as the item will be sold out within 24hrs.
No backorders allowed.
Scratch & Dent items are sold as-is. What you see in the photo is what you will get.
Because HobbyKing loses money on each Scratch/Dent item sold we cannot offer warranty or answer questions on these products.
Item will be deactivated once a 0 stock level is reached.
For full details please see PRODUCT ID: TS829-B-kit
Características do Produto
Capacidade ( mAh)
Peso ( g )
Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!