roda de nariz Servoless retrair com munhão metal e braço de direção.
33 milímetros x 35 milímetros Mount 90 Graus
Características Auto Cut Off e 4mm pré-instalado Oleo de montagem Pin.
Placa de montagem Dimensões: 33 milímetros x 35 milímetros
Scew buraco espaçamento: 24 milímetros x 28 milímetros
Profundidade: 26 milímetros
Duração: 61 milímetros
Pin: 4 milímetros
Peso: 46 g (x 1)
Para combinar a engrenagem principal retrai ver ID de produto: HK-15090S-2
Características do Produto
Peso ( g )
Funktioniert immer Einwandfrei. Ich kaufe nur mehr diese Einziehfahrwerke!montato su un f86 da 3,5 kg,lavora alla perfezione,mai un intoppoThese are fantastic retracts for the money. I have cycled them many many times when setting up steering on my L-39 jet. I have jammed them, locked them up, and still they come back on the next cycle through. Now I can rely on my gear when I need to. Thanks HKSolidly built and works very well. I replaced the nose gear of my HK DH Vampire with this due to the metal trunnion. A bit of work to adapt it but very happy with the result.??????????????????????????????????????These servo less retracts are better than the $50.00 ones that HK have as a set of 3 with ole legs,As the trunnion is metal and not plastic like the other set of 3Bem robusto gostei, suporta bem pousos mais pesadosBe very careful with these things, they easily break. Not physically, but electronically. I think if you remove power from it mid travel it can potentially break it. 3 out of 5 of these retracts just stopped working!
Avoid using a servo tester too. I think it could also damage them.These are excellent retracts. They are slim and very sturdy. The trunnion is a bit loose when retracted (good thing), and stiff when extended. I removed the steering mechanism to use as a fixed gear with ease. Just need M3 set screws. Great productthese work great! diy-ed the h.a.l landing skids onto them and now the quad has great retracts! only downside is they are very heavy! so will add to the flying weight