Servoless retrair com trunion de metal para grandes modelos com 51 milímetros x 43 milímetros Mount (2pcs) 90 Graus - Características Auto Cut Off e 5 mm pré-instalado Oleo de montagem Pin.
Tensão de funcionamento: 4.5 ~ 7.4V
Suportado Modelo Peso: 10 ~ 12 kg
Placa de montagem Dimensões: 51 milímetros x 43 milímetros
Scew buraco espaçamento: 42 milímetros x 31 milímetros
Profundidade: 31 milímetros
Duração: 93 milímetros
Peso: 96 g cada
Características do Produto
Capacidade ( mAh)
Peso ( g )
Used these on my 26cc fw190 and they work flawlessly. . Had them in for the last year (Stood the test of time) many a time I have Bent the 5mm pins but the retracts have stood up well to my model weighing 6-7kgI just got them and tested on the bench. So far, they are running very good. Transfer time is about 7 seconds. Just for optical effect I programmed my nose whretract on anonther channel with a delay of that 7 seconds and now, first the main gear goes up/dowm, and once finshed the nosegear starts to work. Very scale for a lot of aircraft. I would not recommend them for more than 4Kg of take off weight.These retracts work great, electric mechanism seem very strong. The plastic mounting is weak.
I have purchase 3 sets so far. The mounting break quite easily. Not sure if I would buy more. Strong internally, weak housing.Very good product. Its used on a 2.10 m black horse AT6. it weighs 5.5 kg (11 pounds). drilled it out to fit a 6mm shaft and put some nice struts on them. looks great and works like a charm.I've mpunted these retract on my BF109!! They work very well!Received these yesterday, plugged them in and all work fine, they are very smooth in operation and look very sturdy and strong.
Putting these in my Hangar 9 P47, will update when fitted.
Value for money is excellent compared to other products on the market, just waiting for my Oleos to come fromHK.
If you are thinking of getting these, buy them you won't be disappointed.nice n beefy, though there is slight acceptable amount of slop between trunnion and plastic housing, the slop stay the same and did not get worse over time, nice!!!I installed these in an 11 pond Top Flite p-47 and I have 3 flights on them so far and they are working perfectly. They are replacing a set of eflite electric retracts that cost $160. I had the Eflite for one year and in that time two of them failed and had to be replaced.
I would definitely recommend these for anyone looking for good 60 size retracts...why waste your money on eflite that are not reliable when you can get these for a fraction of the cost?!Hab gerade 4 Stueck bekommen, alle laufen sauber, hab auch einen Dauertest ber gut 5 Minuten laufen lassen und dabei auch mal blockiert. Es wird nicht hei, schaltet sauber ab, Gewinde laeuft gut. Spiel im Block ist vertretbar. Gehaeuse ist berrachend stabiel steif, aber nicht sprde. Selbst mit einer Zange zusammen gedrckt lief das Fahrwerk noch ohne erhoehte Stromaufnahme. Das es fuer 12kg Modelle geeignet sein soll halte ich mal fuer ein Geruecht. 6-10kg duerfte es besser treffen.Fitted right into my ESM Spitfire MkXIV 72". Great and slow operation. Approx 6-7 seconds. Seems very strong and rigid. Will update review after 10 more landings. I am not sure they will last long in an 12kg model, but my ESM Spitfire weights 6kg, so that should not be a problem. Great price and a great product
Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!