Micro 1S conduzido lipoly servo.
Excelente para pequenas aplicações interiores.Spec.Torque: 0,18 kg 0,26 kg ~
Peso: 3,9 g (0,11 onças)
Velocidade: 0,10 ~ 0.09sec / 60deg
Tensão: 3V ~ 5.0VTipo de Motor: CorelessPlug: JST / 1,5 milímetrosTensão de operação não pode ser superior a 5V.
Servo vem com acessórios, instruções e uma garantia total.
Características do Produto
Peso ( g )
Speed ( Sec / 60deg )
Torque ( kg) ( min. 0,01 kg )
Unit Weight (g):
A ( mm ):
C ( mm )
D ( mm ):
E ( mm):
F ( mm )
attention ces servos sont en prise micro...Bought 6 of them. Three have been used and abused so far, and wow, they are great with my AR6300. The other 3 were spares, just in case because I was not trusting them, but wow, forget about it, after a month, I'm already thinking about building another plane with them because I don't think I'll need spares anytime soon...These are decent servos. They are more durable than the D03010 servos from blue arrow. They seam to be under 4 grams according to my scale. They are a little noisy, and buzz a little at centre. The JST connector and wires are way too fragile. The Spektrum remote receiver extensions have the same JST plug, and the pack comes with 2 wires. (4 plugs total) perfect to replace broken plugs, or convert from JR to JST.Great little servo! I am using it on the rudder on a DEPRON 3D airplane with a 30" span an it's handling the load very well.Nice servo, I use it for small 3D Yak54. Works fine, so far.Nice little servo. One of the 4 servos I got was dead on arrival(poor QC).Works fine with the Tgy 1 cell controller on my Mpx Fox. Be carefull not to pull the plug out of the receiver by the wires, or you will find out how easy they come off the plug.All in all- a good servo.Very nice servo, great price. Comes with good set of hardware. Receiver connector fits Spektrum AR6300 Rx as well as others. Connector lead length may be a little short (3 inch) for some apps.Je vais les essayer sur un ultra micro biblan indoor.
+/- 25 gramme.c'est une construction personel.
A voir leur fiabilit......
Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!