Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

SIX Glass Fiber Hexcopter 600 milímetros Moldura

Generating Links

SIX Glass Fiber Hexcopter 600 milímetros Moldura

Preço:

Now save economize 0,00 € 0,00 €

24,32 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
323000047
Envio Grátis? Clique aqui aprender mais!

A SIX é um quadro hexcopter de alta qualidade que oferece uma grande procura e desempenho a um preço que não pode ser batida! Construída quase inteiramente de peso leve de fibra de vidro ainda rígida, a SIX oferece uma grande combinação de redução de peso e força.

Este quadro hex possui pernas de pouso ajustáveis ​​que lhe permite ajustar o quadro para atender às suas necessidades. Você pode deslizar as pernas de pouso fora para as bordas para torná-lo mais estável no solo e também pode ajustar a altura.

A capacidade de elevação adicional de uma configuração hexagonal torna este quadro ideal para transportar cargas maiores, como sistemas de câmeras e outros componentes eletrônicos. Isto faz para um equipamento de câmera excepcional ou simplesmente um quadro multi-rotor muito ágil e poderosa para acrobacias!

Nós oferecemos uma linha completa de produtos eletrônicos multi-rotor tais como a placa multi-rotor controle, ESC, motores e muito mais, por isso nunca foi mais fácil ou mais acessível para obter um hexcopter no ar!

Todo o hardware necessário está incluído, apenas adiciona seus próprios eletrônicos.

especificações:
Peso: 625g (quadro sem electrónica)
Largura: 600 milímetros
Buracos Motor parafusos: largura de 19 milímetros

Requeridos:
placa de controle Multi-Rotor
20 ~ ESC 35A brushless x 6
3 ~ 4S 2650 ~ 3300mAh bateria lipoly
28-XX ~ 35-XX 700 ~ 1000KV motor brushless x 6
9x5 ~ hélice 10x5 - 3 padrão de rotação / 3 reverso

  • SIX Glass Fiber Hexcopter
  • Glass Fiber Hexicopter
Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

| Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jun 09, 2015

The frame arrived well-packaged and took 15-30 minutes to easily assemble. Instructions were not included but there are some under the 'Files' tab. Have not yet tested this frame for vibrations, but it is likely to produce little - I found that all joins were tight and rigid. Great value for money.

Dave | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

May 28, 2014

Just got the kit today and on first impressions looks good.
The one BIG problem, which I thought may have been rectified following the last review, is there is NO plans with the kit.
This may not be a problem for some, but, for people like myself who are disabled, it can be a daunting task trying to put together the hundreds of small parts without any reference.
Please guys, it may be little cost for a good product but I for one, would gladly pay a few coppers more to have a couple of sheets of paper with information on how to put the thing together.

Stefan | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Oct 07, 2013

First off I was really happy with it, eventhough landing gear is totally crap and will not survive any rough landing.
Motor mounts are loosely fitted to booms.
The booms will twist and wobble wich causes tremendous problems for a bit heavier model, I flew with about 3Kg total weight, with intermittent problems normally caused just after high power thrusts, this was traced to wobbling arms due to the high power torque, FC then tried to compensate an unstable frame.
at 3.5Kg the model was unflyable resulted in crash and broken arm beyond repair. No spare parts are available as of now.

Now I'm using the center soucer parts with custom ALU square booms

Bryan | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Jun 04, 2013

Annoying issues with a few of the aluminum spacers they were mis-drilled and wouldn't accept screws from the one of the sides. The landing gears are EXTREMELY frustrating as they are very hard to lock into place where you actually want them they also do not move very freely. It took serious sanding just to get the parts to fit together. Overall though it was a good bargain considering the cost and strength of the materials.

Luis Alvarado | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Apr 29, 2013

This kit is outstanding. Very easy to assemble. I was able to build it in 15 to 20 min with motor. Now I need to add everything ells. Cant wait to fly it. Very nice

Supersepp | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Apr 02, 2013

MoinMoin!
Dieser Hex ist vom Preis-Leistungsverhltniss ganz gut. Leider gibt es auch Makken... Bei einigen Alu Bolzen war das Gewinde so krumm geschnitten das ich sie entsorgen musste. Ansonsten funzt der Zusammenbau ganz gut.
Beim Landen unbedingt drauf achten das das Aufsetzen immer sehr vorsichtig erfolgen muss! Das Landegestell ist sehr zerbrechlich und grazil.
Alles in allem passt der Hex schon...

Simon | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Feb 10, 2013

This is a great hex frame however you need to remember you are spending 20! A little bit of sanding is needed to get the legs to fit correctly (very simple) and there are no instructions..... not too difficult once you stop and think. Dont rush the build or think it is a 2 minute job!! Looks GREAT when built and nice size. I'll let you know how it flies!

Mistei | Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Dec 04, 2012

Der Hexcopter macht einen sehr stabilen Eindruck, der Zusammenbau ist auch ohne Anleitung uerst einfach. Da es sich hier um meinen ersten Multicopter handelt, bin ich auf die Flugeigenschaften sehr gespannt!

srepfler | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Oct 15, 2012

Easy to assemble,
good quality of fiberglass,
fit and finish close just some little sanding for tight fit.
For KK2 need to drill holes on top plate.
Fly good, strong frame,
no vibration,
plenty of space for mounting.

Arquivos de clientes
Manual - SIX Glass Fiber Hexcopter Frame Download [1338]
SIX Hexcopter Assembly Manual Download [1338]
SIX Hexcopter Assembly Manual Download [1338]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!

Acessórios