Skywalker Naja FPV EPO 1.920 milímetros (ARF)

• Overall
• Quality
• Value

Skywalker naja

Dec 01, 2017

Excellent airplane and good value look forward to the first flight.

• Overall
• Quality
• Value

ral frotten

Dec 06, 2016

These fly very stable and VERY slow, they need a bit of power to get them up there, then they cruise very nicely, mine now has a ntm1800kv with an apc10x7 prop a 50amp esc and 3 turnigy 2200mah 3s 20c battery's in parallel, flies for 20minutes and cruises nicely at 1/2 throttle, it will loop VERY easily but DON'T try to roll it over it does not like to roll right over! buy when they have a special you wont regret the purchase

• Overall
• Quality
• Value

Very nice and well performing plane. AFTER some knife action...

Nov 24, 2016

As Mr Frotten remarks below; "Its a Skywalker, so it flies well". Indeed. I purchased one, flew it once, and immediately purchased a second one just in case. I cut the lower pod fully off and glued two sheets of depron into the hole and covered the whole thing in packaging tape (I posted the mod on RCGroups). The plane does fly nicely and with a folding prop it glides forever. Sweet spot for cruising around 55km/h. Mine are equipped with Pixhawks and do some sweet, fast, semi long-range FPV/UAV missions. With the prop in the middle of the plane, I put a Mini Mobius on the wing. It's sufficently small to not upset airflow.

Video here: https://youtu.be/IdxVE-j-u58

• Overall
• Quality
• Value

Customer Rated

Jun 20, 2016

It's a skywalker so I know it flys well, I have 6 skywalkers now, I bought it for a great price on a "SALE" It's typical skywalker no instructions, but its going to build up to a great sized plane, I'm over the fpv thing, I just like flying RC planes, this one came with no foam distortions, all the bit's appear to be here, even a couple of tubes of that great glue! LOL, the carbon spars look to be solid and thick construction, I can not fault the foam or ply work all bits seem to fit together, after it's built and I've flown it a few times I will update this review but at this stage all is good! *-D

• Overall
• Quality
• Value

Customer Rated

May 05, 2016

No assembly manual. HobbyKing send me closely instruction from another skywalker.
Thank you HobbyKing