New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Slow-Cure 30 Min cola epóxi 9. oz

Slow-Cure 30 Min cola epóxi 9. oz

Shipped From:
  • USA
  • International (Hong Kong)
QTY:

Now save guardar 0,00 € 0,00 €

11,65 €
Estado:
Disponível
Peso:
333 g
SKU:
HK-206
WANT FREE SHIPPING? Click here to find out more!
Slow-Cure 30 Min Epoxy 9. oz
SLOW-CURE 30 min. epóxi funciona melhor para a formação de filetes de reforço nas articulações. Ele tem a maior força de nossos epóxis. É impermeável e mais resistente ao calor. SLOW-CURE pode ser usado para a ligação se você estiver disposto a esperar durante a noite. Enchimentos tais como microbal�s pode ser misturado com SLOW-CURE e terminar-CURE para formar uma consistência de massa-like. Tais agentes de enchimento normalmente irá diminuir o tempo de trabalho em cerca de 25%. objectos ligado pode ser tratado após 8 horas e o epoxi curada atinge força total dentro de 24 horas.
  • SKU HK-206
  • Brand -
  • Capacidade ( mAh) -
  • Peso ( g ) 333.00
  • Comprimento 215.00
  • Largura 50.00
  • Altura 146.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I use it for years and never had a problem.

Very good and strong glue.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use it for years and never had a problem.

Very good and strong glue.

All good and pretty but if this is slow I'm a nun!
WARNING!
It is said on the label that mixing it in large quantities, the working time is greatly reduced!
By large quantities they must mean 10 grams or so!
I mixed a 40g (25 degrees in the air) batch and was left starring at most of it hardening in 3 (three) minutes or so.
This is not for laminating more than 100 square centimeters of composite cloth with a batch unless the reaction is seriously tempered.
I will try to mix it and laminate from a cooling bath of water and ice and pre-cool the resin in the fridge.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

All good and pretty but if this is slow I'm a nun!
WARNING!
It is said on the label that mixing it in large quantities, the working time is greatly reduced!
By large quantities they must mean 10 grams or so!
I mixed a 40g (25 degrees in the air) batch and was left starring at most of it hardening in 3 (three) minutes or so.
This is not for laminating more than 100 square centimeters of composite cloth with a batch unless the reaction is seriously tempered.
I will try to mix it and laminate from a cooling bath of water and ice and pre-cool the resin in the fridge.

Excellent quality epoxy which can be used for filling (with microballoons), gluing and laminating. Some people have questioned whether it's usable for laminating, and I have found that thinning it with just a small amount of spraying thinner makes it a little easier to spread into the glass fibres when laminating. I use Norglass Methyl Ethyl Ketone to thin it in this situation, but it would probably be OK to just heat it up before applying it for the same result.

It's a little tougher to sand than the 20 minute version, but I feel that this one is more versatile because of the extra strength and increased working time.

Excellent value.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent quality epoxy which can be used for filling (with microballoons), gluing and laminating. Some people have questioned whether it's usable for laminating, and I have found that thinning it with just a small amount of spraying thinner makes it a little easier to spread into the glass fibres when laminating. I use Norglass Methyl Ethyl Ketone to thin it in this situation, but it would probably be OK to just heat it up before applying it for the same result.

It's a little tougher to sand than the 20 minute version, but I feel that this one is more versatile because of the extra strength and increased working time.

Excellent value.

malgrs les graduation sur la bouteille,un peu dur a doser mais tiens bien

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

malgrs les graduation sur la bouteille,un peu dur a doser mais tiens bien

Super zum laminieren ec..

Ca auf 25 celsius erwrmen, so wird er flssiger zum laminieren verglasen. Doch achtung,je wrmer desto schneller hrtet er aus..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super zum laminieren ec..

Ca auf 25 celsius erwrmen, so wird er flssiger zum laminieren verglasen. Doch achtung,je wrmer desto schneller hrtet er aus..

Great glue I wo use it again

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great glue I wo use it again

Does the job! Cheaper to buy from hobbyking than it is local model ship! Thanks a lot HK!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Does the job! Cheaper to buy from hobbyking than it is local model ship! Thanks a lot HK!!

Super................ openingtime 30min let it cure. i let it cure over night.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super................ openingtime 30min let it cure. i let it cure over night.

excellent quality. very durable and hardens after about 20 minutes

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

excellent quality. very durable and hardens after about 20 minutes

De la colle toujours de la colle que se soit pour rparer ou monter un nouveau jouet. Il en faut. Trs bon maintient utilisation facile et que vouloir de plus ?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

De la colle toujours de la colle que se soit pour rparer ou monter un nouveau jouet. Il en faut. Trs bon maintient utilisation facile et que vouloir de plus ?

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!