6gram servoacionamento precisão de Taiwan.
Rolamento de esferas de apoio no eixo principal e internas apertadas fazem deste servo muito precisa.
Peso: 6,2 g / 0,22 onças
Torque @ 4.8V: 1,2 kg / cm, 17 oz / in
Velocidade @ 4.8V: .10sec / 60deg sem carga
Tamanho: 22,5 x 10 x 23 (0,88 x 0,4 x 0,9)
Características do Produto
Peso ( g )
Speed ( Sec / 60deg )
Torque ( kg) ( min. 0,01 kg )
Unit Weight (g):
A ( mm ):
C ( mm )
D ( mm ):
E ( mm):
F ( mm )
Great little servo, used them to replace the stock servos in the Yak 54 EPO. They center well and i believe punch well above their weight when it comes to torqueI received 2 servos very different. First is D=9mm very slow and no good return to center. Second is D=11mm, excellent, very good speed and center return, the day and the night.
Not too big deception, perhaps a factory error, sure that hobbyking will check thatI better understand the very different comments. i received 2 servos, same item, but very different. The first is black but seems like the photo, D is not 10 mm but 9mm, very slow servo, no good return to center, rather bad.
For the second servo, D=11mm, very good speed and center precision return. Not at all the same product (excellent in this case).
Not too deceived, but I hope future specifications will bee more constant in the futuregood for the price !!!!!!!!!!one of the worst servos i have ever seen, won't even bother using these. there are no screws holding the shell together, instead there is a plastik band wrapped arround it so it will not fall apart. the cables make a very flimsy impression as well. HK should take this servo out, it does notmatch their usual good quality items, hell this one is even more expensive than most of the other servos with similar or better specs.yeah, the same as the Bluebird BMS-306BB, works okay and presiction,
you can simply use Blue Bire gear set for repair,
I will say this price is good at this quality, if you compare with Hitec HS-65 that one.Did not get on at all with this servo. Physically it is very similar in size to the GWS Pico servos, very light weight, and comes with a goodly selection of arms. The only problem is out of the three I bought for a trial, two always seem to be buzzing and I stripped the gears on two just transporting and rough handling the plane surfaces during transit...very disappointed. The gears seem to be extremely brittle and prone to stripping.for my servos are still working fine, also, the gear is okay for my EPP F3A airplane, the torque is okay too with this price, I am happy to recommend.this quiet good and economy digital servo, almost half price than Futaba, the torque is stronger, nice servo and Made in Taiwan.I am not recommend it. Bought 3, 1 is broken after first flight (almost crashed my shocky) 2 still working but sounds really bad. Next time i will buy HS55 - got 6 of them, all working great.
Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!