New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Super 3D flatform EPO R / C Plane w / Brushless

Super 3D flatform EPO R / C Plane w / Brushless

Discontinued Product

Please continue searching for a similar product.
SKU:
3D-Hawk80
WANT FREE SHIPPING? Click here to find out more!
Super acrobático, e muito forte. O flatform EPO 3D é construído para 3D tamanho parkfly. Qualquer um pode aprender a pairar, Harrier e faca de ponta com este avião!
Nós incluímos o motor brushless ADH300L apropriado e hélice 8x4 para você, então tudo que você precisa é um ESC 10A e 3 servos x 5g, o seu próprio TX / RX e um pacote de 500mAh 2S estar pronto para voar!
Spec.
comprimento da fuselagem: 842 milímetros
Envergadura: 800 milímetros
Voar Peso: 310 - 350g
Motor: ADH300 brushless outrunner (Incluído)
Hélice: 9x5 (Incluído)
 
Essentials necessários
Servos: 3 x 9g
ESC: 20A ESC  
Bateria: 11.1V 3s1p 1200mAh ~ bateria Lipo 1500mAh
  • SKU 3D-Hawk80
  • Brand -
  • Capacidade ( mAh) -
  • Peso 696.0000
  • Comprimento 830.00
  • Packaging Width 40.00
  • Altura 290.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I'm in the process of my build and after I had installed the rudder horn in the precut slot I found the C.F. push rod interfered with full elevator travel. I had to remove the rudder horn and move it up about 3/4". Did I route my push rod the wrong way?
Glenn

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm in the process of my build and after I had installed the rudder horn in the precut slot I found the C.F. push rod interfered with full elevator travel. I had to remove the rudder horn and move it up about 3/4". Did I route my push rod the wrong way?
Glenn

The plane took about 3 hours to assemble; loved the stickers! What a selection. Was a little uneasy with the carbon tube, Z hook and heat shrink but it appears to work. Didn't have any foam safe so put it together with hot glue; worked fine. Set the CG about 25 mm behind the carbon spar. The plane flew right off the board. It was a delight to fly and on the first flight did a tail walk, loops, hover, knife edge but got a bit cautious when I saw the wings flexing! Might beef that up with some CF spar or something or wing braces; not sure yet. But hey, it is cheap and it flies and it is fun. Would like a U/C though...think on that I will. Good bang for bucks and a fun bird.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The plane took about 3 hours to assemble; loved the stickers! What a selection. Was a little uneasy with the carbon tube, Z hook and heat shrink but it appears to work. Didn't have any foam safe so put it together with hot glue; worked fine. Set the CG about 25 mm behind the carbon spar. The plane flew right off the board. It was a delight to fly and on the first flight did a tail walk, loops, hover, knife edge but got a bit cautious when I saw the wings flexing! Might beef that up with some CF spar or something or wing braces; not sure yet. But hey, it is cheap and it flies and it is fun. Would like a U/C though...think on that I will. Good bang for bucks and a fun bird.

Still flying great after one year
great first plane.
I will buy another one after a few more crashes.
I use a 9x 4.7 prop - works great

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Still flying great after one year
great first plane.
I will buy another one after a few more crashes.
I use a 9x 4.7 prop - works great

What an awesome plane! Flying great good to learn ! And durable as nails !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

What an awesome plane! Flying great good to learn ! And durable as nails !

Achet depuis 3 mois maintenant , cet avion me donne entire satisfaction .
Il est trs robuste , si il y a une grosse chute , de la colle et c'est reparti .
J'ai un esc de 20A , une lipo 1300 mAh , un bon compromis entre puissance et poids .
Je vole entre 10 et 15 min suivant le style de vol
J'ai rigidifi les aile avec un fil car elles sont un peu trop souple mon gout .
Ne pas hsiter une seconde sur cet avion , idal pour commencer et continuer la 3D Outdoor pour moi .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Achet depuis 3 mois maintenant , cet avion me donne entire satisfaction .
Il est trs robuste , si il y a une grosse chute , de la colle et c'est reparti .
J'ai un esc de 20A , une lipo 1300 mAh , un bon compromis entre puissance et poids .
Je vole entre 10 et 15 min suivant le style de vol
J'ai rigidifi les aile avec un fil car elles sont un peu trop souple mon gout .
Ne pas hsiter une seconde sur cet avion , idal pour commencer et continuer la 3D Outdoor pour moi .

Flew this yesterday - oct 2012
Hxt500 on rudder and elv
Hxt900 on wings
1000mah 3cell
20amp esc
First 3d foam plane. Went straight from the sim to this with no issues
Flys very good. Take your time with the setup.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Flew this yesterday - oct 2012
Hxt500 on rudder and elv
Hxt900 on wings
1000mah 3cell
20amp esc
First 3d foam plane. Went straight from the sim to this with no issues
Flys very good. Take your time with the setup.

Good plane for the price. you cant hover with it cause its to unstable. when you try to harrier the wings wanna rock back and forth excessively.
but i guess for $30 you cant expect the perfect plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good plane for the price. you cant hover with it cause its to unstable. when you try to harrier the wings wanna rock back and forth excessively.
but i guess for $30 you cant expect the perfect plane.

Debutant dans la 3D , mais ayant de bonnes bases dans les planeurs et autres , je me suis lanc dans l'achat du flatform 3D , la construction reste simple bien qu'il faille avoir l'envie et la patience de bricoler car tout est a faire , seules les dcoupes sont deja faite . assemblage du fuselage , des ailes , scotch des ailes et drives ( vous avez bien lu , les articulations sont faites au scotch ( j'ai utilise un autre scotch arm car celui fourni me semble peu solide a la longue ) l'hlice fournie avec le kit est demesuree et surtout mal equilibree donc j'utilise une 7X6 qui va trs bien avec mon esc 20 A et la lipo 1200 mAh en 3S
L'avion est bien conu , d'une puissance acceptable pour la 3D ( une monte verticale lui fait pas peur )
Solidit car tres souple ( petit bemol pour la fixation moteur un peu fragile )

Je pense que cet avion est parfait pour dmarrer en 3D , beaucoup de bricole , prix tres acceptable

Encore un bel article que nous propose HK

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Debutant dans la 3D , mais ayant de bonnes bases dans les planeurs et autres , je me suis lanc dans l'achat du flatform 3D , la construction reste simple bien qu'il faille avoir l'envie et la patience de bricoler car tout est a faire , seules les dcoupes sont deja faite . assemblage du fuselage , des ailes , scotch des ailes et drives ( vous avez bien lu , les articulations sont faites au scotch ( j'ai utilise un autre scotch arm car celui fourni me semble peu solide a la longue ) l'hlice fournie avec le kit est demesuree et surtout mal equilibree donc j'utilise une 7X6 qui va trs bien avec mon esc 20 A et la lipo 1200 mAh en 3S
L'avion est bien conu , d'une puissance acceptable pour la 3D ( une monte verticale lui fait pas peur )
Solidit car tres souple ( petit bemol pour la fixation moteur un peu fragile )

Je pense que cet avion est parfait pour dmarrer en 3D , beaucoup de bricole , prix tres acceptable

Encore un bel article que nous propose HK

Pretty happy with this plane so far. Flown it a few times. I taped all the edges with clear shipping tape. Also added cross bracing with carbon rods. Cross bracing and not a wing spar makes the plane much more rigid, way too floppy otherwise. 500 mah seems a little too light and 1300 mah 3s seems a little too heavy. Fun, cheap, flys good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pretty happy with this plane so far. Flown it a few times. I taped all the edges with clear shipping tape. Also added cross bracing with carbon rods. Cross bracing and not a wing spar makes the plane much more rigid, way too floppy otherwise. 500 mah seems a little too light and 1300 mah 3s seems a little too heavy. Fun, cheap, flys good.

I received mind all was great until plug in the motor,pcnt#*&pcnt Got a bad motor, man that sucks - what can you do?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I received mind all was great until plug in the motor,pcnt#*&pcnt Got a bad motor, man that sucks - what can you do?

  1. 1
  2. 2
  3. 3
Customer files
manual Download [296]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!