Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

T5682 Turnigy Pro 1700kv Comp Brushless Inrunner Motor

T5682 Turnigy Pro 1700kv Comp Brushless Inrunner Motor

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
992 g
SKU:
T5650-1700
Descrição
do

Quando você precisa de poder sério para o seu barco perfomance em grande escala ou 1/5 escala carro de RC, não procure mais do que os inrunners Pro Series Comp Turnigy. Estes motores soberbamente engenharia oferecem alta qualidade, ultra alta performance e confiabilidade. O motor é re-edificável e possui tampas removíveis, o eixo do motor tem um plano usinado e é de 8 mm de diâmetro para suportar o torque extremo produzido por este monstro de um motor!

especificações:
Tamanho: 56x82mm
Kv: 1700rpm / v
Células LiPoly: 6s
Max Eficiência: 4800W
Corrente em Eficiência Max: 180A
Max atual (10s): 265A
Sem carga atual: 4.4A
Resistência interna: 0,0038
Eixo: 8mm
Peso: 690g

Product
Specifications

Características do Produto

  • SKU:
    T5650-1700
  • Brand:
    N/D
  • Peso ( g )
    992.00
  • Comprimento
    0.00
  • Largura:
    0.00
  • Altura:
    0.00
  • Kv ( rpm / v )
    1700.00
  • Correntes Max (A)
    265.00
  • Potência (W):
    4800.00
  • Comprimento B (mm):
    82.00
  • Pode Comprimento D (mm)
    74.00
  • Max Tensão ( V)
    25.00
  • Shaft A ( mm):
    8.00
  • Unit Weight (g):
    690
  • Diâmetro C ( mm )
    56.00
  • Comprimento Total E ( mm)
    106.00
  • Resistência (MH ):
    0.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I had a minor problem with one of the wires. Shrinking tube was not double as on other two, and after heating it, to change stock connectors, was cut a few centimeters due to heat. Then motor was tested under a load at 180A at 6s with a lot of cooling air. Rpm was 26K. After 4 min of almost full throttle smoke started coming out of the motor and I could here a "screatching noise". I stopped motor and thought the bearings were shot. Well, something worst had happened.The spindle/rotor of the motor holds the magnets together with a bit of blue epoxy(2 drops each only!!!) and a thin film of I guess, polyamide". Magnets had broken both epoxy and film and touching inside of motor. Final result 2 of them were badly scratched. Now I need to re-glue them with a very good epoxy hopefully, and balance the whole thing. That means a lot of work...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a Great Motor,and for the price you can't beat it. I have been running it in my 42' Mono now for 2 mounths every day,(5s 40c Batts) and no problems.This motor would also work great in a 1/5 scale truck or buggy.Awsome power,around 6 Horse Power,Instant throttle response.Will buy more as soon as they come back in stock.(hope they get more).Would recommend this motor for anyone needing massive power.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wow... I fired up this bad-boy today for a quick test free-holding it. It spins up to max speed instantly with no load. Running at max speed It is incredibly smooth. Someone took the time to do a high quality build here and custom balanced the internal shaft and magnets.

What an impressive motor. This is beyond belief.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just got my hands on this big block and what I can say its a tremendous powerhouse to be used on 1 meter cat.Would like to know what is the best esc to connect to this beast?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wow! What a monster! It is definatly a TP Power Motor- Parts inside and Cables from the same manufactor. More Power then the Leopard 5682! Using this Motor in a 1/5 Redcat Rampage XBe- Insane Power!
This is a powerful High Quality Motor with incredible Torque.
4 Pole 18 Slot. Super Low Price!!! Buy, Buy, Buy!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.