Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • USA

T5692 Turnigy Pro 1320kv Comp Brushless Inrunner Motor

T5692 Turnigy Pro 1320kv Comp Brushless Inrunner Motor

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
1140 g
SKU:
T5660-1320
Descrição
do

Quando você precisa de poder sério para o seu barco perfomance em grande escala ou 1/5 escala carro de RC, não procure mais do que os inrunners Pro Series Comp Turnigy. Estes motores soberbamente engenharia oferecem alta qualidade, ultra alta performance e confiabilidade. O motor é re-edificável e possui tampas removíveis, o eixo do motor tem um plano usinado e é de 8 mm de diâmetro para suportar o torque extremo produzido por este monstro de um motor!

especificações:
Tamanho: 56x92mm
Kv: 1320rpm / v
Tensão máxima: 30v
Células LiPoly: 8s
Max Eficiência: 6000W
Corrente em Eficiência Max: 190A
Max atual (10s): 375A
Sem carga atual: 4.2A
Resistência interna: 0,0043
Eixo: 8mm
Peso: 813g

Product
Specifications

Características do Produto

  • SKU:
    T5660-1320
  • Brand:
    N/D
  • Peso ( g )
    1140.00
  • Comprimento
    0.00
  • Largura:
    0.00
  • Altura:
    0.00
  • Kv ( rpm / v )
    1320.00
  • Correntes Max (A)
    375.00
  • Potência (W):
    6000.00
  • Comprimento B (mm):
    92.00
  • Pode Comprimento D (mm)
    84.00
  • Max Tensão ( V)
    30.00
  • Shaft A ( mm):
    8.00
  • Unit Weight (g):
    813
  • Diâmetro C ( mm )
    56.00
  • Comprimento Total E ( mm)
    116.00
  • Resistência (MH ):
    0.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
BIG MOTOR , this motor is huge , running on a 150A controller , lowest speed current draw at 15 volts is just above 1 amp , max speed on 15 volts , current is just above 5.8 amps both readings on unloaded motor , great quallity , but better sleving over 3 main wires could be better , as one has split on mine , but i will replace it :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Running on 8s (esc is the Turnigy AquaStar 240A HV) in a 45" hull. The thing is scary!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this would go nice behind the hobbyking jet drive for large boats
oh yeah bring it on , 1/4 scale jet boats
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
All I can say is Wow! I wish it wasn;t winter and I could slip this bad boy into my 40" mono to test.

Definately NOT a leopard clone. Different core & windings 4 SURE!!

I haven't recieve my TP power motor yet to compare construction. I will follow up.

This motor has 16 steps as per other poster on this brand as opposed to 12 steps for leopard motors.

For once i am stumped as to who makes these?? Or which brand it is derived from unles HK actually did request a factory to make their own vrand.

I will have to consult some other motor GURU's to see if this is a 4, 6 or even an 8 pole like a Neu 2210.

Core resembles a Neu or Aqua craft UL1 motor in that looking from the outside in, it looks incased. Maybe I will take it apart but, I don't really want to at this time.

WIres that exit the rear vent holes should IMO be better insulated with lots more heat shrink or Med. to large size silicone fuel tubing. 4mm ID require and rear vent holes are approx. 9mm in diamter.

I wish they would tell us how many poles it is so I don;t fry an esc on testing!!!! LOL, will use cheapy esc on bench I guess.

More to come ! Merry X-mas!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.