New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Alvo Drone v1.5 Fiberglass FPV Avião 1.520 milímetros (ARF)

Alvo Drone v1.5 Fiberglass FPV Avião 1.520 milímetros (ARF)

Shipped From:
  • International (Hong Kong)
Discontinued Product

Please continue searching for a similar product.
Peso:
1715 g
SKU:
411000001
WANT FREE SHIPPING? Click here to find out more!

O alvo não tripulado é um grande avião FPV que foi projetado especificamente para o trabalho e não só é o kit mais barato para comprar, este grande modelo pouco também é barato para entrar no ar.

* O novo v1.5 alvo Drone agora inclui uma cúpula de câmera clara removível para a frente da fuselagem. Esta cobertura magnética permite um acesso rápido e fácil a sua câmera, proporcionando proteção contra os elementos e uma vista panorâmica!

O alvo não tripulado apresenta uma fuselagem de fibra de vidro que é aberto na frente para a montagem da câmera, há também um construído em cobertura anti-reflexo. O modelo é projetado para um motor propulsor como seria de esperar e também possui um MID montada, grande portal para a bateria e do acesso ao equipamento. O grande e aberto área de fuselagem não só tem muito espaço para o seu equipamento FPV e lipoly, ele também fornece abundância de bateria e resfriamento ESC da fuselagem da frente aberta. A carruagem inferior é robusto, com parafuso nas pernas de liga leve na parte traseira e uma roda de nariz orientável na frente.

O alvo não tripulado é uma compilação muito rápido, cabos de extensão servo são pré-instalado na asa balsa, que é montado em uma haste CF e epoxied no lugar. O hardware fornecido é abrangente e as partes globais contar de baixo, o que significa que você estará experimentando FPV em tempo rápido de casal. O alvo não tripulado, com a sua tailess, varreu asa é um dos modelos EP FPV mais incomuns e interessantes em sua classe ainda e é certo para chamar a atenção das pessoas, sempre que ele voa!

Características:
• * New Limpar removível Camera Dome incluído
• Robust Fiberglass Fuselagem
• Abrir Câmara Frontal Monte com anti-reflexo Tampa
• Grande Mid-Mounted escotilha de acesso
• Balsa Construído Asa & Winglets
• Sturdy Sob Carriage
• Nose-Wheel Steerable
• Baixa contagem das peças
• todo o hardware incluído
• Configuração Pusher

especificações:
Envergadura: 1,520 milímetro
Comprimento: 500mm
Voar Peso: 500g ~ 700g
Área Wing: 17.2dm2
Asa Loading: 29g / dm2 ~ 40.6g / dm2

exige:

Sua própria 4 ~ 6 Canal TX / RX com Elevon Misturando
28-36 Brushless Outrunner Motor 1.800 kv
3 x Servo 9g
30A ESC w / BEC
Bateria 1300mAh ~ 2200mAh 3s Lipoly
Equipamento FPV

  • SKU 411000001
  • Brand -
  • Capacidade ( mAh) -
  • Peso ( g ) 1715.00
  • Comprimento 870.00
  • Largura 160.00
  • Altura 200.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Good fiberglass plane. But do not forget to glue front wheel mount, if you wish to start not from sling or hands. Have myself one and now i am preparing a sling for take-offs. Plastic camera dome is very thin and will break at first problematic landing. So, have in mind to make another one or have camera with landing protection.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good fiberglass plane. But do not forget to glue front wheel mount, if you wish to start not from sling or hands. Have myself one and now i am preparing a sling for take-offs. Plastic camera dome is very thin and will break at first problematic landing. So, have in mind to make another one or have camera with landing protection.

For $100 shipped, it's not all bad. After reading many forum threads and reviews, I thought it would make a nice FPV plane with a few mods.
Forget the landing gear. I'm mounting a belly pan and wing skids for grass landings. I'll use my JetaPult for launching.
As far as the power system, I'm installing an Electrifly .10 Rimfire motor with a CF folding prop on the back. Don't care if the outrunner motor is on the outside.
The plastic used for the camera pod is useless. Hazy and distorted view looking through it. Better to paint it grey and put the camera on top, or at least cut a hole for the camera to see through the hazy bubble nose. I'll also put some extra CF bracing on the wing joints, to help keep the wing from folding, under stress. I'm also thinking of adding two small v-tail like fins on the back, to add more stability.

Overall, it's built pretty good, with the exception of the camera bubble and landing gear.
If you don't mind making some mods, this CAN be a very good plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For $100 shipped, it's not all bad. After reading many forum threads and reviews, I thought it would make a nice FPV plane with a few mods.
Forget the landing gear. I'm mounting a belly pan and wing skids for grass landings. I'll use my JetaPult for launching.
As far as the power system, I'm installing an Electrifly .10 Rimfire motor with a CF folding prop on the back. Don't care if the outrunner motor is on the outside.
The plastic used for the camera pod is useless. Hazy and distorted view looking through it. Better to paint it grey and put the camera on top, or at least cut a hole for the camera to see through the hazy bubble nose. I'll also put some extra CF bracing on the wing joints, to help keep the wing from folding, under stress. I'm also thinking of adding two small v-tail like fins on the back, to add more stability.

Overall, it's built pretty good, with the exception of the camera bubble and landing gear.
If you don't mind making some mods, this CAN be a very good plane.

Over use of resin makes it nearly impossible to mount the motor internally. Significant modifications are required if you intend to do this. I cut out the firewall and rebuilt it to mount the motor inside for the clean look. Nice finish but my nose was "tweeked" and slightly twisted. Shouldn't be a problem but for $70 ive seen worse...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Over use of resin makes it nearly impossible to mount the motor internally. Significant modifications are required if you intend to do this. I cut out the firewall and rebuilt it to mount the motor inside for the clean look. Nice finish but my nose was "tweeked" and slightly twisted. Shouldn't be a problem but for $70 ive seen worse...

Customer files
No File Name Download [4025]
No File Name Download [4025]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save