Tarot ZYZ22 GOPRO Brushless Câmara Gimbal Controlador

• Overall
• Quality
• Value

replacement gimbal controller

Oct 29, 2019

Have not tried as a replacement yet

• Overall
• Quality
• Value

Ok but voltage sensetive

Oct 01, 2019

They work well but very sensetive when connecting battery, easily fries due to poor overvolt protection. This is the 3rd replacement I've had to buy for the same gimbal.

• Overall
• Quality
• Value

perfetto

Sep 16, 2019

ottimo rapporto qualità prezzo, funziona alla grande

• Overall
• Quality
• Value

You Will Need A Win7 Machine

Oct 03, 2018

Win 10 will not work with outdated USB to Serial driver. No amount of fiddling will "make it so".
If you have an old computer then your next challenge is to find the software since Tarot gives you zero instructions or links with the package you receive.
I found it here: http://www.tarot-rc.com/index.php?main_page=page&id=17, third from the bottom, in teeny tiny lettering labeled as "Tarot 2-Axis Brushless Gimbal for GoproV1.5.rar" The user manual and drivers are included.
If you decide to upgrade firmware it appears to just go on and on forever, never reaching the end. Just hit CANCEL.
Once you have done all that then start looking for 2 of those tiny connectors for the motor output.
If you have jumped over all those hurdles then you will have a pretty good 2 axis gimbal.

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 05, 2015

good! Tarot ZYZ22 GOPRO Brushless Camera Gimbal Controller

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 22, 2015

mi era capitato di invertire l'aggancio dell'accellerometro su un kit completo tarot 2D e per mia sorpresa vendevano anche solo l'elettronica di ricambio. Invece di riacquistare tutto il gimbal ho riacquistato solo l'elettronica che identica a quella a corredo con il gimbal. Per sostituirla basta aprire l'alloggio dell'accellerometro e via. Non ci sono controindicazioni. Se pu essere fatta una nota negativa, i contatti sono facilmente invertibili e scambiabili, infatti mi capitato di bruciare la scheda inserendo il contatto dell'accellerometro nell'apposita presa per collegare l'usb. Si bruciato sia l'accellerometro che la scheda.

• Overall
• Quality
• Value

Customer Rated

May 09, 2015

It works but LOTS of small nagging issues.
1. No standard servo connectors. Micro connectors on the board (1.25/Molex) so you should purchase adapter or solder wires directly. These are not mentioned in suggested to buy section, needless to say. Annoying, especially for post orders.
2. USB interface is based on old Prolific chip which is NOT supported in Win 8. The other chip will work but interface socket on board is 4 pin 1.25 Molex with unlabelled pins. Had to dig up my Win7 notebook. Annoying.
3.No protection case for sensor. Sensor wire is to short to mount it on gimball for larger frames.
4.Long init after power is plugged.

But it work.

• Overall
• Quality
• Value

Customer Rated

Aug 13, 2014

Works perfectly! But the sensor cable should be longer...
Mounted mine on the HobbyKing Brushless ActionCam Gimbal With 2208 Motors and 3K Carbon Construction and GOPRO Hero 2.

• Overall
• Quality
• Value

Customer Rated

May 11, 2014

Nice little controller for the price, just a bit hard to tune up, but once it is tuned, I think it works well. I had to order my replacement after burning up the first in a failed firmware update process...OOPS!