New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

TGY AerodriveXp 90 SK Series 50-65 380Kv / 1820w

TGY AerodriveXp 90 SK Series 50-65 380Kv / 1820w

Shipped From:
  • International (Hong Kong)
Discontinued Product

Please continue searching for a similar product.
SKU:
SK5065-380
WANT FREE SHIPPING? Click here to find out more!
Turnigy AerodriveXp Série SK
motores AerodriveXP Série SK são projetados para aqueles que querem o melhor em tecnologia outrunner para seu avião R / C. Tipicamente, uma melhoria de eficiência de cerca de 8-10% pode ser visto ao longo motores elas classificados semelhantes. Isto é em parte devido ao seguinte;
Estator Laminações: .2mm
Ímã Tipo: N45SH
Rolamentos: oversize duplo (japonês)
Modelo: SK50-65-380
Kv: 380rpm / v
Acontece: 6
Resistência: 24
Ociosa atual: 1.3A
Eixo: 8mm
Peso: 430g
Potência: 1820w
ESC: 80A
A contagem de células: 4 ~ 8 Lipoly
Sugeriu Prop: 16x8, 16x10, 17x9
Equivalente Potência: .91+ brilho motor

  • SKU SK5065-380
  • Brand -
  • Peso 460.0000
  • Comprimento 0.00
  • Packaging Width 0.00
  • Altura 0.00
  • Kv ( rpm / v ) 380.00
  • Correntes Max (A) 0.00
  • Resistência (MH ) 24.00
  • Max Tensão ( V) 29.00
  • Potência (W) 1820.00
  • Shaft A ( mm) 8.00
  • Comprimento B (mm) 63.00
  • Diâmetro C ( mm ) 49.00
  • Pode Comprimento D (mm) 43.00
  • Comprimento Total E ( mm) 86.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Hello!

I've put it into a 1,8 M Spitfire and I tested it with different props.

Turnigy battery 6 cell 5000 mAh 25-35 C, Turnigy ESC 120 A.

My personal experience (in full trottle):

15x8 plastic prop, 38A, 933W

18x8 plastic prop, 55A, 1327W

20x12 plastic prop, 87.5A, 2016W

21x12 wooden prop, 101A, 2288W

I had 20 starts with it, and it works excellently.

I think it is a valuable motor. It is worth buying.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hello!

I've put it into a 1,8 M Spitfire and I tested it with different props.

Turnigy battery 6 cell 5000 mAh 25-35 C, Turnigy ESC 120 A.

My personal experience (in full trottle):

15x8 plastic prop, 38A, 933W

18x8 plastic prop, 55A, 1327W

20x12 plastic prop, 87.5A, 2016W

21x12 wooden prop, 101A, 2288W

I had 20 starts with it, and it works excellently.

I think it is a valuable motor. It is worth buying.

ho montato questo motore sul mio katana 120 sebart con regolatore sentilon100 elica 19/8 apc mi assorbe 65 amp , ci sto volando da diversi mesi ed sono veramente contento , ringrazio hk.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ho montato questo motore sul mio katana 120 sebart con regolatore sentilon100 elica 19/8 apc mi assorbe 65 amp , ci sto volando da diversi mesi ed sono veramente contento , ringrazio hk.

ho montato questo motore sul mio katana 120 sebart, e regolatore sentilon 100, va benissimo, e ci volo da diversi mesi. molto importante regolare le impostazioni sul regolatore altrimenti si brucia sono veramente contento ringrazio hk.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ho montato questo motore sul mio katana 120 sebart, e regolatore sentilon 100, va benissimo, e ci volo da diversi mesi. molto importante regolare le impostazioni sul regolatore altrimenti si brucia sono veramente contento ringrazio hk.

I have this motor now for more than 50 flights on a Sebart Angel 50. I have a Turnigy 6s 3600maH 30C plus Turnigy 85A ESC. I started with 16 X 10, where you have about 60 A. With this setup i goes very nice. But after i have read of a configuration with 18 x 10 i have tried this and i must say....very very nice. It is then 65 A, but you dont need to have full throttle at any time. So my recomendation is 18X10! (if you have enought place to the ground!!)

But since now i had no problems with loose magnets,etc.

Panzi June,2011

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have this motor now for more than 50 flights on a Sebart Angel 50. I have a Turnigy 6s 3600maH 30C plus Turnigy 85A ESC. I started with 16 X 10, where you have about 60 A. With this setup i goes very nice. But after i have read of a configuration with 18 x 10 i have tried this and i must say....very very nice. It is then 65 A, but you dont need to have full throttle at any time. So my recomendation is 18X10! (if you have enought place to the ground!!)

But since now i had no problems with loose magnets,etc.

Panzi June,2011

I have 2 of SK5065/380.

very good for 26cc gas 3D plane conversion.

My Choice is 6S-5000mAh TGS 18x8-10 APC 18x8
ESC is HobbykingSS 90/100A only $30.

With TGS 18x10 6800rpm/75A 1.6kw.
It equals MLD28 or more.

Its not extreme performance but suit.

H9 ShowTime90 TGS 18x8 4.3kg
GW YAK54/26cc TGS 18x10 4.6KG



verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have 2 of SK5065/380.

very good for 26cc gas 3D plane conversion.

My Choice is 6S-5000mAh TGS 18x8-10 APC 18x8
ESC is HobbykingSS 90/100A only $30.

With TGS 18x10 6800rpm/75A 1.6kw.
It equals MLD28 or more.

Its not extreme performance but suit.

H9 ShowTime90 TGS 18x8 4.3kg
GW YAK54/26cc TGS 18x10 4.6KG



Great!
5065-380 HobbyKingSS-90/100A Turnigy 6S-5000

GoldWing YAK54 APC18x8/TGS18x10 4.6kg With Batt 6800rpm 75A
Hanger9 ShowTime90 TGS 18x8 4.2kg With Batt 7000rpm 73A
Makes about 6.5kg thrust.

This combination is berry cheap and usefull.
6S-ESC costs only $30.
Req Only One Charger.
Cheap 20C Lipos enough for.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great!
5065-380 HobbyKingSS-90/100A Turnigy 6S-5000

GoldWing YAK54 APC18x8/TGS18x10 4.6kg With Batt 6800rpm 75A
Hanger9 ShowTime90 TGS 18x8 4.2kg With Batt 7000rpm 73A
Makes about 6.5kg thrust.

This combination is berry cheap and usefull.
6S-ESC costs only $30.
Req Only One Charger.
Cheap 20C Lipos enough for.

My Specs re
SK5065 - 380 Turnigy 6S 5000mAh20C
Props TGS 18x10 18x8 APC 18x8E

GoldWing Yak54-26cc 4.6kg
APC 18x8E or TGS 18x10 6750RPM 75A

Hanger9 ShowTime90 4.3kg
TGS 18x8 6900rpm

GoodBalance!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My Specs re
SK5065 - 380 Turnigy 6S 5000mAh20C
Props TGS 18x10 18x8 APC 18x8E

GoldWing Yak54-26cc 4.6kg
APC 18x8E or TGS 18x10 6750RPM 75A

Hanger9 ShowTime90 4.3kg
TGS 18x8 6900rpm

GoodBalance!

very strong motor. Pulls 5 KG on 6S for competition F3A. Recommened.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very strong motor. Pulls 5 KG on 6S for competition F3A. Recommened.

Second time that i buy engine. i use it for a MX2 186Cm from goldWing with a weight of 4,7Kg.

Using 6s 4000Mah Nanotech and a wood propeller 20*8. Using this plane with this configuration for 3D.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Second time that i buy engine. i use it for a MX2 186Cm from goldWing with a weight of 4,7Kg.

Using 6s 4000Mah Nanotech and a wood propeller 20*8. Using this plane with this configuration for 3D.

the Motor pulls a lot of power and the magnets are strong glued, but the quality of the shaftholder is poor. i must fix it with 4 screws instead of the recomeded 2.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

the Motor pulls a lot of power and the magnets are strong glued, but the quality of the shaftholder is poor. i must fix it with 4 screws instead of the recomeded 2.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!