Thrust Vectoring Enigma 3D 960 milímetros (ARF) - vermelho

• Overall
• Quality
• Value

Customer Rated

Oct 12, 2015

Easy build, I used hitech servos in the aileron's and TV mount, standard metal gear on the tail/rudder, little bee esc, turnigy xp 1100kv motor spinning a 10x4.5 and a 1800mah horeson pack. It runs ok with this setup but a 950kv motor spinning a 11-12" prop will be better suited.

• Overall
• Quality
• Value

Customer Rated

Mar 04, 2014

came packaged and secured nicely. it was a very easy and straight forward build. im using a slightly larger motor so the battery had to be moved back about mid wing. it does take a bit ti get off the ground but once off its very responsive especially with the thrust vector mixed in with the rudder. kife edge is effortless, flat spins are very easy, hovering the right hand wing needed some weight to keep it there. after 12 flights my motor mount broke off at the hinge but i suspect that being the extra thrust it has and the grass i take off from is pretty bumpy.

my specs:
55 amp esc
1300mah nano tech 3s
35/36/9 910kv
12x8 wooden prop.

in that setup the cowling will need to be modified.