Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

TowerPro 4130-8T 425g / 352kv / 72A Brushless

TowerPro 4130-8T 425g / 352kv / 72A Brushless

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
450 g
SKU:
TP4130-8T
Descrição
do

TowerPro 4130-8T
Isso faz parte do towerpros nova geração de motores.
Melhorou rolamento e qualidade do eixo, bem como estator refinado e design do ímã.

Spec.
Tamanho: 51 milímetros de diâmetro x 89,2 milímetros Comprimento
Peso: 425 g
Ociosa atual: 1.2A
Recomended Lipo Config: 6-8 Células
Constante: 352Kv
Diâmetro do eixo: 6mm
Max Efficency: 57A
Carga máxima: 72A
Max Power (W / 60): 1.700
Sugeriu Prop: 16x10


Motor vem com liga resistente adaptador de montagem placa e giratório mostrado (tipo pinça). parafuso sem cabeça e eixos retentor pode ser afrouxada para inverter eixo para montar firewall locais diferentes.

Product
Specifications

Características do Produto

  • SKU:
    TP4130-8T
  • Brand:
    N/D
  • Capacidade ( mAh)
    Não
  • Peso ( g )
    450.00
  • Comprimento:
    0.00
  • Largura:
    0.00
  • Altura
    0.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
motor is a quqlity product with nice appearance and can swing a 17/10 prop with authority on 6cA 123's

I will fly this in a 7lb P40 Warbird
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent motor, same exact efficiency, size and performance as an AXI 4130-20.. used it to replace a burned up AXI in my 9.5lbs P51. See this thread for details:

http://www.rcgroups.com/forums/showthread.php?t=660928&pp=50



With a 10s1p pack of Dewalt A123 cells and an APC 13*10 electric prop it used 43Amps at 28volts, 1200 watts. Simulation was pretty close to actual results, use Kv=352, Io=1.2A, Rm=99mohms... for the A123 lipos use voltage=3.35V, 8mohms resistance, 2300mah capacity. Excellent motor for the 60-90 size plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Motor looks really nice. Put an APC 18x8 on with six Emoli cells. At 31 amps it was getting just over 5000 rpm producing over 7 pounds of thrust. With 6S 4400 mah I expect to go a bit faster but it is perfect for the five pound 3D job it is targeted for.



verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I mounted this motor on my Hanger 9 Funtana 100 X today and was very pleased with the power. My static test showed more than 1700 watts on an 8S 4000 mah battery at 60 amps swinging a 17x10 apc prop. The plane is 8.5 pounds so it should be balistic! Will be flight testing this week.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I put this motor on a Sig HogBipe and with 6s2p A123's and of to the heavens I went. All I can say is no more AXI's for me. TowerPro motors are my choose of motors for now on. Top notch motors.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor, this thing cranks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Might be a bit of overkill on a .46 size plane but pulls like a train on 7 a123 cells with a 15x13 prop. 40A at approx 17 volts = unlimited verticle!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ulrich, it is possible to mount it backwards.. loosen the two set-screws and the wheel collar and slide the motor shaft forward.. apply blue locktite and re-tighten set screws. It is a tight interference fit so you may have to gently tap it with a hammer to get the shaft to move.

Limit this motor to 1200 watts in a sport plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Tested this motor with 6 Lipo cells and 8 cells.



With 6 cells and using an 16x10 APC Prop the motor had 6.000 revolutions by using 35 A





With 8 cells and a 15x10 glow prop it had 9.000 revolutions and draw 45 A.



Great motor, for good price, no backward mount possible if needed
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ecellent !

Mes mesures :



6S2P HXT2250, contrleur Pentium60 APC-E 16x8 30,5A 6060tr 640W

Forte bois 16x8 32,2A 6060tr 675W

MPX Bois 16x10 34A 5880tr 715W



8S2P HXT2200, contrleur Pentium 80HV APC-E 14x10 36A 7600tr 1000W

Grp bois 15x8 32A 8000tr 900W

Forte bois 16x8 42A 7100tr 1200W
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.