Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

TR 35-48-B 900KV Brushless Outrunner Eq: AXI 2826

TR 35-48-B 900KV Brushless Outrunner Eq: AXI 2826

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
186 g
SKU:
TR35-48-900
Descrição
do

Turnigy AerodriveXp

Modelo: TR35-48-B
Tensão de entrada: 7.4V ~ 18.5V (2 ~ 5S Li-po)
Kv: 900 rpm / V dentro de 10%
Nb. de voltas:   10 Delta

Max. atual eficiência: 20 ~ 30A
Capacidade de corrente: 42A / 60s
Resistência interna: 43 Mohm
Sem carga atual @ 7V: 1.83A
Dimensões: 35mm X 48 milímetros
Diâmetro do eixo: 4 milímetros / 0.16in
Peso com cabos: 163g / 5,75 oz
Quantidade de pólos / ímãs: 14
Recomendada de peso modelo: 1500 ~ 2800g / 52 ~ 98 onças
Potência equivalente: 0,30-0,35 brilho motor
Estator Dimensões: 28x26mm

prop sugerida: 11x6 (5cell lipo)

Semelhante a AXI ouro 2820/12 ou 2826/10, E-Flite de energia 15, E-Flite de energia 25.

Product
Specifications

Características do Produto

  • SKU:
    TR35-48-900
  • Brand:
    N/D
  • Peso ( g )
    186.00
  • Comprimento
    0.00
  • Largura:
    0.00
  • Altura:
    0.00
  • Kv ( rpm / v )
    900.00
  • Correntes Max (A)
    42.00
  • Potência (W):
    0.00
  • Comprimento B (mm):
    48.00
  • Pode Comprimento D (mm)
    32.00
  • Max Tensão ( V)
    19.00
  • Shaft A ( mm):
    4.00
  • Unit Weight (g):
    163
  • Diâmetro C ( mm )
    35.00
  • Comprimento Total E ( mm)
    67.00
  • Resistência (MH ):
    43.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I have installed this motor TR35-48-B on Eflite AT6 texan 54'' wings span and I have 10-flights already have no problems so far...my setting x5 82mg servo, flaps x2 HXT900 servos, hacker esc 55amps, props 12x8 4000mah to 5000mah Zippy, motor TR35-48-B great motor for the price.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My Son fly this stuff in a FVK Roco with 4s and a 13/8.
Runs very good with this setup!
Later we will try an 14/7 for more performance at the Vertikal.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fantastic motor ! put it in my piper pawnee with a turnagy plush 80A esc running 3cell 4400 lipo - getting 20 mins flights and nothing is even warm when it comes down - whole set up never missed a beat still running great after numerus flights. very fine motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very good engine, withstood, by airscrew 10 * 8 and for mass of the plane about 1 kg raising almost 8-10 m/sec.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Runs great. has alot of power on my Apprentice 15e. Took a little while for me to find out how to mount it, but I finally got it. Great Product A
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought this motor for my MPX Mentor. Using an APC 12x6 on maiden flight the shaft snapped just before take off. Replaced shaft and a new, balanced APC 12x4, immediately after take off the shaft snapped, managed to get it down straight ahead but sustained quite an amount of damage. Very disappointed with this particular motor. I have 4 other Turnigys and never had a problem

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Der Motor ist was Preis und Leistung fr sich nicht schlecht. Als einziges Manko wrde ich die recht dnne Welle und den Einstich zur Fixirung der Welle nennen. Von der 4mm Welle bleiben so lediglich 3mm brig. Ich wrde zum Kauf der SK-Serie raten, bei der die Welle strker (5mm) dimensioniert ist.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I put this engine in my 182 cesnna 2600g, with a Turnigy lipo5S 2650mAh and make flights of 10minutes and with good speed maneuvers, gets a little hot, but never gave me any trouble, I'm very happy with it.

Try to include as much data as possible.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use this engine with a 13X7 propeller, a controller 40 A TURNIGY PLUSH

, 3S 2200mA battery on my Easyglider

Mounted vertically, fast response time, excellent engine

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
tres bon moteur mais attention arbre de 4 mm trop fragile (trop tremp il casse comme du verre) Si vous devez en commander un sachez qu'il y a 2 diametres differents sur ce site avec la meme reference TR35-48 shaft alors comme moi une fois vous recevrez du 5 une autre fois du 4!!!!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.