New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Trackstar 540 tamanho 4 Pole 4250KV Sensored Motor

Trackstar 540 tamanho 4 Pole 4250KV Sensored Motor

Shipped From:
  • International (Hong Kong)

Now save guardar 0,00 € 0,00 €

43,01 €
Alert me
Estado:
Indisponível!
SKU:
9192000121-0
ETA:
No ETA At This Time [ ? ]
WANT FREE SHIPPING? Click here to find out more!

Os motores brushless sensored Turnigy Trackstar oferecem um desempenho excepcional a um
preço incrível! motores de série Trackstar foram otimizados para uso com altas de hoje
alimentação 1 / 10th caminhões de corrida escala, carros e buggies.

4 motores pólo reduzir a sua aceleração imediata, mas fornecer mais torque e uma melhor
velocidade máxima, que é ideal para veículos mais pesados ​​que são voltadas para velocidades mais altas.

Apresentando uma qualidade anodizado do motor CNC pode, mão-de feridas enrolamentos de cobre de alta pureza e
neodímio sinterizados potentes ímanes, você não vai encontrar um motor melhor preço deste calibre
em qualquer outro lugar! Eles também dispõem de tempo ajustável, que permite o ajuste fino do
desempenho de seu passeio, enquanto o sensor garante startups suaves e aceleração.

Os motores brushless TrackStar fazer uma grande atualização para 1 / 10th carros, caminhões e buggies ou
qualquer outra coisa que usa 540 motores de tamanho.

Características:
• Sensor baseada em para uma excelente torque e dirigibilidade de baixa velocidade
• tempo ajustável
• Compatível com qualquer ESC sensored / sensorless
• Motor usinado boleto T6 de alumínio CNC pode
• enrolamentos de cobre de alta pureza
• guias de solda de alta potência
• magneto de neodímio sinterizado Powerful
• Engenharia de precisão para a conversão de energia máxima

especificações:
Kv: 4250KV
Max atual: 55A
Max Power: 610W
Ociosa atual: 2.1Amp 0.0057ohm
Shaft: 17 milímetros x ø5mm
Peso: 195 gramas
ESC sugerida: 80A
Contagem de células: 2-3s Lipoly
Espaçamento de buraco de parafuso: 25mm e 25 milímetros
Conexão: Soldagem direta

Nota: Cabo do sensor incluído

  • SKU 9192000121-0
  • Brand TrackStar
  • Peso 270.0000
  • Comprimento 105.00
  • Packaging Width 45.00
  • Altura 80.00
  • Kv ( rpm / v ) 4250.00
  • Correntes Max (A) 55.00
  • Resistência (MH ) 6.00
  • Max Tensão ( V) 11.00
  • Potência (W) 610.00
  • Shaft A ( mm) 5.00
  • Comprimento B (mm) 53.00
  • Diâmetro C ( mm ) 35.00
  • Pode Comprimento D (mm) 48.00
  • Comprimento Total E ( mm) 71.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very good motor. I pair it with TrackStar Gen 2 120A SCT sec and they give my SCT plenty of power. Very smooth both low and high speed. I waterproof both with varnish (especially the sensor component) and I can dive my SCT into water without problem. I currently tested it up to 80km and planned to test it >100km with a higher pinion gear. I added a heat sink (151000014) and the motor temperate is around 60'C in a sunny day with ~32'C air temperature. So a cooling fan is recommended if you want to give it a very tough job and I believe it should handle well too! 100pcnt recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good motor. I pair it with TrackStar Gen 2 120A SCT sec and they give my SCT plenty of power. Very smooth both low and high speed. I waterproof both with varnish (especially the sensor component) and I can dive my SCT into water without problem. I currently tested it up to 80km and planned to test it >100km with a higher pinion gear. I added a heat sink (151000014) and the motor temperate is around 60'C in a sunny day with ~32'C air temperature. So a cooling fan is recommended if you want to give it a very tough job and I believe it should handle well too! 100pcnt recommended.

mmmmmmmmmmmmmmmmmmmmmmmmmm

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

mmmmmmmmmmmmmmmmmmmmmmmmmm

What a monster of a motor. I installed this in a Turnigy Trooper with a 120A ESC, and geared down to an 11T pinion (from 14T stock) expecting to get a small but noticeable speed boost. Instead, I got a 4wd semi-guided missile that's nearly impossible to control for any reasonable person. the truck is spinning all 4 tires on pavement for at least the first 40 feet, by which point it's probably going 45mph (a guess) and still pulling hard. If you are a basher, this motor is great (though I suspect the trooper's durability may suffer due to the increase in crash energy). But if you're a racer, I think most people will find this motor is too much for use on a smaller, indoor SCT track. I'll be dialing my throttle setting back to 60pcnt or so just to maintain control around the track.



Also of note, this motor does not actually fit the trooper without modification to the heat sink/motor mount, due to the location of the motor lead wire soldering pads. It's a 5 minute fix with a dremel tool to cut up the heat sink.



So other than too much power (which I never thought I'd say, ever), and the mounting difficulties which don't seem unusual,this motor is great so far. 5 stars for now, subject to change if the motor blows up or something.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

What a monster of a motor. I installed this in a Turnigy Trooper with a 120A ESC, and geared down to an 11T pinion (from 14T stock) expecting to get a small but noticeable speed boost. Instead, I got a 4wd semi-guided missile that's nearly impossible to control for any reasonable person. the truck is spinning all 4 tires on pavement for at least the first 40 feet, by which point it's probably going 45mph (a guess) and still pulling hard. If you are a basher, this motor is great (though I suspect the trooper's durability may suffer due to the increase in crash energy). But if you're a racer, I think most people will find this motor is too much for use on a smaller, indoor SCT track. I'll be dialing my throttle setting back to 60pcnt or so just to maintain control around the track.



Also of note, this motor does not actually fit the trooper without modification to the heat sink/motor mount, due to the location of the motor lead wire soldering pads. It's a 5 minute fix with a dremel tool to cut up the heat sink.



So other than too much power (which I never thought I'd say, ever), and the mounting difficulties which don't seem unusual,this motor is great so far. 5 stars for now, subject to change if the motor blows up or something.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking