Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Turnigy 1/16 4WD Nitro Corrida Buggy w / atualizado .07 Engine (ARR)

Generating Links

Turnigy 1/16 4WD Nitro Corrida Buggy w / atualizado .07 Engine (ARR)

Preço:

Now save economize 0,00 € 0,00 €

126,95 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9249000379
Envio Grátis? Clique aqui aprender mais!

Não deixe que ele é pequeno tamanho enganar você. Este é um sério 1 / 16th Nitro Racer!

Temos tido este grande buggy pouco nitro e tornou ainda melhor com uma .07 motor atualizado! O Turnigy 1/16 4WD Nitro Corrida Buggy agora oferece mais potência e uma velocidade máxima mais elevada, apenas o que você precisa para satisfazer o seu poder de apetite com fome!

Começando com um japonês fez puxar a partida no motor nitro 0,07 ci, tubo sintonizado, impulsionado eixo de tração nas quatro rodas - com eixos prop aço e freio de disco, este buggy pouco preenche todos os requisitos. Ele tem uma grande gama de ajuste fora da caixa, tais como: braços ajustáveis ​​superiores de controlo, do amortecedor fulcro, Amortecedor pré-carga, centro de rolo de suspensão traseira e batentes reguláveis ​​para baixo.

Um rápido olhar sobre as imagens irá demonstrar a durabilidade embutido e componentes mais de engenharia, tais como os braços de suspensão, amortecedores e anteparas. Ele é construído mais como um piloto de escala 1/10 de um 1 / 16th!

Este carro chega receptor pronto, totalmente construída com o director de alto torque e servos de aceleração instalado e todas as ligações pré-ajustado. Basta adicionar o seu receptor, 4 baterias AAA, combustível, um motorista de vela de incandescência e seu pronto para balançar!

especificações:
Servos: 15g High Torque Micro
Drive: Full Time 4WD, gêmeo Diff
Largura: 187MM
Altura: 101MM
Pista: 191MM
Comprimento: 280MM
Distância entre eixos: 177MM
Relação de transmissão: 11.2: 1
Motor:. 07 ci
Distância ao solo (F / R): 20-30mm

Requeridos:
2 de rádio Channel (TX / RX)
4 pilhas AAA para o receptor
combustível nitro
motorista de vela incandescente

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

Ralf | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Feb 08, 2016

Car came quickly from european wearhouse. The Quality looks good. The car Ha metal Gear in front and rear. Very good. The engine starts good and I had a lot of fun
I had some Problems to put my Frsky Tfr6 Info the small RC Box but i sollen it. If you want to have a car with great fun factor, buy it. The Price and the Quality is good.

olivier | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jan 31, 2016

recus hier deja en rade lanceur obsolete au vu des commentaire c'est un probleme recurrant .et depuis le temps aucune modification apporter par les concepteurs sa craint et n'augure rien de bon pour la suite.aussi faire TRES ATTENTION AU PIN LORS DU DEMONTAGE DES ROUES!bref c'est mon deuxieme achat et deuxieme deception(moto 1/5 nitro qui a jamais demarrer)quand au sav ne parlant pas anglais

anthrax66 | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 05, 2015

Except for the pull-start mechanism, the vehicle is built for quality and endurance. Be sure to order some spare clutch and clutch covers, as well as spare pull-starter mechanism for replacements in time of need. When adjusting the carburettor needles, be sure that the tires of the car can run free.

Adrian | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 19, 2015

The are generally is good. The One way bearing is in deed rubbish. I replaced it with a Japanese H408 and it is a perfect. you may need to seal the fuel tank cap and nipple on the cap and seal the engine backplate and exhaust all the way to the tuned pipe as it leaks everywhere. I founf the header o ring was pinched when I did the reseal. Replaced the O ring. If you do an upgrade on the suspension C-Hub and knuckles, be sure to lock tight them as I have lost the screws and all metal it does not bite and will work loose by itself. If you over tighten them, then there is no freeplay. Also do change out the wheel hubs to metal, it is so much smoother. I got a 2 speed gear box and it is really fast. Besure to keep some spur gears as spares as it wears out pretty quick. I have lube all differential gears with only Vaseline petroleum based grease and it works wonders. If you car leaks do seal them. The high speed needle (HSN) is around 2,5 turns from closed.

Adrian | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 29, 2015

I like the car and it is fast with the 2 speed gearbox. the clutch sprint is rubbish and the starter recoil slips. The fuel tank cap leaks under pressure. There is no chance you can adjust the 2 speed shift as once you do it, you will screw it up. leave it stock. Running with 15pcnt nitro and no.8 glow. Idles well and accelerate well. Handling on road is good.

| Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 05, 2015

just purchased it today, cant wait for it to arrive and start it up :)

ABCXYZ | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jan 03, 2015

Very satisfied.
For reliable actuation, OWB was replaced in made INA.
Was to facilitate the start-up by changing the Roto Start.

Upload in soon, to see the FILES.(116NB-LOTO1 ~ 4 photos.)

Zachary | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 04, 2014

Unpacked from box and everything but the clutch to spur gear mesh was perfect. Screws were all nice and tight, linkage was well adjusted. Using the Hobbyking GT2 tx/rx combo. RX box on buggy is small so the small RX that comes with the combo fits perfectly. great buggy for a great price!

Samuel | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 01, 2014

Awesome little buggy!! The model is easy to start and the engine is really permisive. It will run as rich as you may want, making the engine breaking procedure really easy. I would recommand to anywone buying this model (or any prebuilt model) to clean and lubricate both differentials and chang the shock oil (27.5w work perfect). The only breakage that occured in the first 5 tanks, was the throtle servo horn (my fault... I had a spare in the kit anyway) and a clutch spring. I've replaced the clutch spring with a 0.88mm coming from a 1/8 buggy.



Spare parts to have : servo horn, clutch springs, and glow plugs.



The rest should be good unless you smash the thing at every objects in his way.

Taylor | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Feb 17, 2014

I love this buggy!
What a fun little car! I have been out of nitro for 5 or so years so this is a great way for me to get back into the hobby! It screams up and down my street. While I have broken a few parts, it was always my fault (like running into a car tire)
Pros:
Shares parts with kyosho mini inferno
cheap
fast
jumps well
good handling
Strong enough for a good driver.
(if you crash hard into stuff it will break)
Cons:
parts in US take time to ship
brakes could be stronger (adjusting stock linkage helps but it needs a better servo, going to swap in a HS55 soon)

using to much after run oil makes the pull start OWB slip, but its easy to fix, just pull the glow plug out and FLOOD the block with nitro fuel for a minute or so... Then drain the fuel out and your off!
Overall cant beat it for the price!

  1. 1
  2. 2
  3. 3
Arquivos de clientes
Manual Download [5263]
Manual Download [5263]
No File Name Download [1044]
OWB replacement idea Download [59]
Exploded wiew 2 Download [103]
Exploded wiew 2 Download [101]
Exploded wiew 1 Download [98]
OWB replacement idea Download [59]
29488762X1146429X49.pdf Download [5263]
picco p zero stock engine Download [1197]
  1. 1
  2. 2
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!