poder sério para o carregamento de pesados!
A fonte de alimentação Turnigy 1080W apresenta potência de saída ajustável (13.8V para 18V DC) tornando-se uma fonte de alimentação extremamente versátil. Esta fonte de alimentação também possui quatro saídas e é apropriado para alimentar 4 carregadores até 1080W (combinado). A fonte de alimentação HobbyKing 1080W também dispõe sobre a corrente e sobre a proteção da temperatura e LEDs de aviso.
Esta unidade é ideal para a execução de vários carregadores sem a necessidade de ter fontes de alimentação separadas. Também é perfeito para alimentar carregadores de alta potência para carregar a altas taxas ou de carga paralela várias baterias.
Tensão de entrada: 220 ~ 240V AC
Tensão de saída: 13.8V ~ 18V DC (ajustável)
Amps saída: 60A
Saída Watts: 1080W
Temperatura Cutoff: Arrefecimento: Dual Fan
Dimensões: 258 x 138 x 73 milímetros (tamanho caso)
Peso: 2,388 kg
Características do Produto
Peso ( g )
Absolutely impressed by the built quality and its functionality. However the 3 outputs rated at 10A are a bit weak because they only provide around 100W before they break down. I can charge a 6s1P battery with 4.5Amps. If i want more (5Amps) I get input voltage error at the charger. I use more than one output because i have multiple chargers connected to the supply. -1 crown for this downside. However, I am very happy with it! My recomendation!Bought this PSU for my 2 mega 400w chargers that are built in a charging case. The PSU is a bit heavy making the case with chargers about 8kg. But plenty of power for my charging needs with about 320w to spare so i could connect a separate charger to it for my buddies at the field. Only downside is the switch on the PSU it doesn't have a light on it. But that a bit of nitpicking. A absolute plus is the cable to the PSU from the main wall outlet is just a standard pc cable. One other thing is that i rather had 2 30a connections and 2 10a instead of 1 60a and 3 10A ports a usb port would have been nice too.Ottimo prodotto per rapporto qualit prezzo.
Fa il suo dovere, la tensione stabile e la corrente erogata corretta!Haven't had chance to test it yet but if looks and feel are any judge of quality then very impressed so far, only gripe is that mine came with 2 pin foreign mains power plug not 3 pin UK style.
Once I've had chance to test I'll add more.I bought 3 of them. No problem if you do not push this unit to more than 40Amps. Then you have problem. Over current led is on and PSU off. After 1 year it can happend also wit low Amps /e.f. 10Amps!/. Fans are ok, temperature ok, just 1 charger /icharger/ attached and just ballancing 6sLipo and no chance to keep this PSU "alive". Over current and off again and again.. :-(Very good power supply. Easy to handle and to adjust the voltage. I like the switchable connections for 10A output.
I have connected 4 pcs x 5.800mAmps batteries (witch results to 24 Amps) and the "fantastic" PSU not succeded to overpass the 17Amps....Practically USELESS. DON'T BUY IT.So far so good. Used a splitter in the main 60amp port and so far have run 4 x LRP Pulsar Touch Chargers from it all at once. Hasn't missed a beat, didn't get hot only slightly warm. Fan could be smarter and would be nice if it had some kinda built in voltage gauge so you could see what voltage you have wound it down to. The LRP Pulsar chargers show voltage input anyway so I just used that to judge it by but if you have a voltmeter its no problem. So pretty happy overall.Been using it a few months, and so far so good.
The only negative point is the cooling fan. Instead of a slowly rpm increase, it bursts to maximum each /- 4 seconds.when you have this PS you dont need anything else