New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Turnigy 1811 Brushless 3800kv Motor Indoor

Turnigy 1811 Brushless 3800kv Motor Indoor

Shipped From:
  • USA
  • International (Hong Kong)
QTY:

Now save guardar 0,00 € 0,00 €

11,23 €
Estado:
Disponível
Peso:
43 g
SKU:
T1811-3800
WANT FREE SHIPPING? Click here to find out more!
Turnigy 1811 Brushless 3800kv Motor Indoor
Dimensão: 22 milímetros x 18 milímetros, 30 milímetros (com eixo)
Peso: 11g (kv2300) (não incluindo conectores)
Diâmetro do eixo: Â F2mm
Comprimento do eixo dianteiro: Â F8mm
Espessura de laminação:. 2 milímetros
Tipo de magneto: 45SH




Baixar arquivos de dados;
Turnigy MOTOR DE DADOS

  • SKU T1811-3800
  • Brand Turnigy
  • Peso ( g ) 43.00
  • Comprimento 64.00
  • Largura 39.00
  • Altura 39.00
  • Kv ( rpm / v ) 3800.00
  • Correntes Max (A) 7.00
  • Resistência (MH ) 0.21
  • Max Tensão ( V) 9.00
  • Potência (W) 59.00
  • Shaft A ( mm) 2.00
  • Comprimento B (mm) 21.00
  • Diâmetro C ( mm ) 18.00
  • Pode Comprimento D (mm) 7.00
  • Comprimento Total E ( mm) 30.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Working well on my Nutball with a 6030 prop, Plush 10a esc, 2s battery.

First nutball i built using a multi-star 1104 3100kv motor. Because of the mounting its pretty much permanent once mounted... Works well enough until you encounter some frontal damage. Tried the 1811 because the motor mounts are accessible.

As noted under the international reviews/discussion the motor wires need to be protected or not subject to abuse/improper handling.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Working well on my Nutball with a 6030 prop, Plush 10a esc, 2s battery.

First nutball i built using a multi-star 1104 3100kv motor. Because of the mounting its pretty much permanent once mounted... Works well enough until you encounter some frontal damage. Tried the 1811 because the motor mounts are accessible.

As noted under the international reviews/discussion the motor wires need to be protected or not subject to abuse/improper handling.

Great little motor for a pusher microjet such as the X16 chuck glider. Weight rtf is about 100g, and it goes like a missile on a GWS 3x3 prop, 350 2s Lipo.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little motor for a pusher microjet such as the X16 chuck glider. Weight rtf is about 100g, and it goes like a missile on a GWS 3x3 prop, 350 2s Lipo.

Small in size but pack with speed

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Small in size but pack with speed

piccolo e molto potente ottimo per BONSAI TURNIGY

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

piccolo e molto potente ottimo per BONSAI TURNIGY

???? ??? ???? ?? ???

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

???? ??? ???? ?? ???

This motor stinks. I had already made the plane and had everything ready to go except for the motor. When the motor arrived I soldered the connectors on and excitedly installed it on my plane. All of my excitement was quickly diminished when I turned on everything and the motor sat there having a seizure going back and forth. I tried this on many esc and all had the same result. Please skip the pain and DON'T buy this motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This motor stinks. I had already made the plane and had everything ready to go except for the motor. When the motor arrived I soldered the connectors on and excitedly installed it on my plane. All of my excitement was quickly diminished when I turned on everything and the motor sat there having a seizure going back and forth. I tried this on many esc and all had the same result. Please skip the pain and DON'T buy this motor.

Great motors, i used them for Lama V4 bl conversion. I put 3s battery and eXtreme props with slightly lower pitch, and lama has 500gr pulling force. And all that with full thottle, and motors draw only half of their max current, and stay cool. Amazing small and light motors.
PS: Yes, for lama you must put 3s battery or it will barely lift from ground.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motors, i used them for Lama V4 bl conversion. I put 3s battery and eXtreme props with slightly lower pitch, and lama has 500gr pulling force. And all that with full thottle, and motors draw only half of their max current, and stay cool. Amazing small and light motors.
PS: Yes, for lama you must put 3s battery or it will barely lift from ground.

I use this motor in a NE skysurfer that I rebuildt th electrics in. About 116g without battery. I use a 7a esc and 350 mah battery. The plane have plenty speed and endless vertical. I would recomend it for planes 60-150g.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this motor in a NE skysurfer that I rebuildt th electrics in. About 116g without battery. I use a 7a esc and 350 mah battery. The plane have plenty speed and endless vertical. I would recomend it for planes 60-150g.

Just recieved my motor yesturday on 8/2/12 put it on my mini popwing with a two cell 500 mah, 4.1x4.1 prop, I like motor plenty of power if you wana see check out video i will post up. I will name it mini popwing

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just recieved my motor yesturday on 8/2/12 put it on my mini popwing with a two cell 500 mah, 4.1x4.1 prop, I like motor plenty of power if you wana see check out video i will post up. I will name it mini popwing

I'm using this with the Bonsai. Power seems ok for the moment, not more I can add really. One more thing, I thought it would come with mounting screws. Lucky me I have a bag of screws around or I'd be screw*d!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm using this with the Bonsai. Power seems ok for the moment, not more I can add really. One more thing, I thought it would come with mounting screws. Lucky me I have a bag of screws around or I'd be screw*d!

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
Motor mount, check comments for solidwor Download [896]
No File Name Download [47]
No File Name Download [47]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags