New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Turnigy 3500kv 2815 EDF Outrunner para 55/64 milímetros

Turnigy 3500kv 2815 EDF Outrunner para 55/64 milímetros

Shipped From:
  • USA
  • International (Hong Kong)
QTY:

Now save guardar 0,00 € 0,00 €

9,89 €
Estado:
Disponível
SKU:
T28151C3500
WANT FREE SHIPPING? Click here to find out more!
Turnigy 3500kv 2815 EDF Outrunner para 55/64 milímetros
especificações:
KV- 3500
Dimensões: 51 x 28 milímetros
Shaft: 2,3 / 3,0 milímetros
Voltagem: 11.1V
Peso: 74 g
Corrente sem carga: 1.9A
Sem carga RPM: 38460
Corrente de carga: 17.8A
Carga RPM: 32780
Thrust: 485g
Furo de Montagem Parafuso Circle: 18 milímetros
MTG. Hole Número & Size: 4 x M2.5
 
Inclui 2 eixos, 2.3 e 3.0mm
  • SKU T28151C3500
  • Brand Turnigy
  • Peso 110.0000
  • Comprimento 90.00
  • Packaging Width 45.00
  • Altura 55.00
  • Kv ( rpm / v ) 3500.00
  • Correntes Max (A) 1.96
  • Resistência (MH ) 36.00
  • Max Tensão ( V) 12.00
  • Potência (W) 19.60
  • Shaft A ( mm) 3.00
  • Comprimento B (mm) 48.00
  • Diâmetro C ( mm ) 28.00
  • Pode Comprimento D (mm) 17.00
  • Comprimento Total E ( mm) 64.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have a put a post in the forum with stats for this motor a few of its brothers and sisters but ill put them here too. Motor is good quality and I think will run on 4S fine if kept under 500W.

3S 64mm 5 Blade Fan 19A, 220W, 11.7v 450g thrust (in plane)

4S 64mm 5 Blade Fan 30A, 450W, 11.7v 640g thrust (in plane)



3S 64mm 6 Blade Fan 19A, 216W, 11.45v 480g thrust (in plane)

4S 64mm 6 Blade Fan 29.5A, 430W, 14.8v 640g thrust (in plane)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have a put a post in the forum with stats for this motor a few of its brothers and sisters but ill put them here too. Motor is good quality and I think will run on 4S fine if kept under 500W.

3S 64mm 5 Blade Fan 19A, 220W, 11.7v 450g thrust (in plane)

4S 64mm 5 Blade Fan 30A, 450W, 11.7v 640g thrust (in plane)



3S 64mm 6 Blade Fan 19A, 216W, 11.45v 480g thrust (in plane)

4S 64mm 6 Blade Fan 29.5A, 430W, 14.8v 640g thrust (in plane)

I bought 2 of these for a GWS-262. I use 2 25A tower pro ESCs and a turnigy 2200mah lipo. Its too much for the lipo, it gets hot and puffed out. I'll try a 2600 mah next. Great motors, lots of power. Great value.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 2 of these for a GWS-262. I use 2 25A tower pro ESCs and a turnigy 2200mah lipo. Its too much for the lipo, it gets hot and puffed out. I'll try a 2600 mah next. Great motors, lots of power. Great value.

Looks are good, some flaws.

I had to rebalance both of my motors, I needed lots of CA to balance them but after balancing they ran fine.



Axles supplied with motors were 2.3mm , 3mm and 3.3mm , but 3.3 mm will not fit because the hole is already almost too tight for 3mm axle!

I had to use brute force and hammer to get 3mm axle of and install 2.3mm.



Real life performance will tell more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Looks are good, some flaws.

I had to rebalance both of my motors, I needed lots of CA to balance them but after balancing they ran fine.



Axles supplied with motors were 2.3mm , 3mm and 3.3mm , but 3.3 mm will not fit because the hole is already almost too tight for 3mm axle!

I had to use brute force and hammer to get 3mm axle of and install 2.3mm.



Real life performance will tell more.

Motor appears to be of good quality. On a GWS 64mm, 6-blade fan, Hyperion 3S 2500mAh 25C, Phoenix 25A ESC-low timing, I was pulling 22 amps and 239 watts at 11 volts WOT. Sorry no thrust data, but holding the unit in my hand produced impressive thrust for a 64mm fan. The website says 17.8 amps as 'load current'. If I understand that to mean max continuous, than a five blade fan may be better. No thrust data, but impressive for 64mm unit.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor appears to be of good quality. On a GWS 64mm, 6-blade fan, Hyperion 3S 2500mAh 25C, Phoenix 25A ESC-low timing, I was pulling 22 amps and 239 watts at 11 volts WOT. Sorry no thrust data, but holding the unit in my hand produced impressive thrust for a 64mm fan. The website says 17.8 amps as 'load current'. If I understand that to mean max continuous, than a five blade fan may be better. No thrust data, but impressive for 64mm unit.

Awesome motor, 540W on peak with a 5*5 prop and a 3S 1600 35C hyperion.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome motor, 540W on peak with a 5*5 prop and a 3S 1600 35C hyperion.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking