Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

1200KV Turnigy 3632 Brushless

Generating Links

1200KV Turnigy 3632 Brushless

Preço:

Now save economize 0,00 € 0,00 €

24,10 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
T3632-1200
Envio Grátis? Clique aqui aprender mais!
Dimensão: 36 milímetros x 38 milímetros, 54 milímetros (com eixo)
Peso: 99 g (kv1200) (não incluindo conectores)
Diâmetro do eixo: 4 milímetros
Comprimento do eixo dianteiro: 18,4 milímetros
Espessura de laminação:. 2 milímetros
Tipo de magneto: 45SH

desempenho Max
Tensão: 3-4S
Max atual: 35 ~ 40A / 20S
Prop: 10x5 ~ 11x5.5
Pull: 1400-1930g
Para 1400-1800g avião 3D.




Baixar arquivos de dados:
Turnigy MOTOR DE DADOS

  • Kv ( rpm / v ) 1200.00
  • Correntes Max (A) 40.00
  • Resistência (MH ) 0.03
  • Max Tensão ( V) 13.00
  • Potência (W) 340.00
  • Shaft A ( mm) 4.00
  • Comprimento B (mm) 35.00
  • Diâmetro C ( mm ) 37.00
  • Pode Comprimento D (mm) 14.00
  • Comprimento Total E ( mm) 53.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

Gerard | Comprador Verificado

  • Value
  • Quality
  • Overall

Excellent Motor/Great performance

Apr 26, 2020

I took a chance on this motor from the specs. Turned out great. I was able to change the shaft for a rear mount assembly. With a 41 oz. scratch built low wing plane, I am getting 270 watts of power with an 8 x 7 prop on 3 cells. Flight times exceed 7 minutes, but could go longer; I don't like to push motors/batteries to their limits.

Mikhail | Comprador Verificado

  • Quality
  • Overall
  • Value

With a propeller of 262 X 150 mm, with a voltage of 11.4 V and a current consumption of 30 A, the thrust is 1.5 kg.

Dec 11, 2019

Good engine

Eric | Comprador Verificado

  • Overall
  • Value
  • Quality

Good motors

Nov 19, 2019

These are good little motors for their size and price. I got two of them for a twin that I built. The motor shaft needed swapped so that I could mount them from the rear, but I have done that many times before so I went ahead and got these. The alan screws were so tight, and the hex head was so tiny that not even heating the bell around the screw could loosen them AT ALL. The heads just stripped. I ended up drilling them out, tapping the pin out and redrilling and tapping new screws into the bell. it was not a quick or easy process. Luckily everything stayed strait and the motors work really well now. But if you need to swap the shaft....beware

Bojan | Comprador Verificado

  • Overall
  • Value
  • Quality

good

Mar 14, 2018

very good motor

croboki | Comprador Verificado

  • Quality
  • Overall
  • Value

good

Mar 13, 2018

Strong and powerfull motor. Will buy again.

Napstr | Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jul 23, 2015

Excellent quality - really powerful motor - great for 30 sized aircraft - spins a 11x5.5 or 12x6 with ease and provides great pulling power - perfect for 11-1200mm aerobatic aircraft

Chris | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Jan 17, 2014

I got this motor for my Multiplex Fun Cub after bending the casing on another another motor when I reversed it.
This motor arrived wih abent shaft. I could tell before I put the prop on by the fuzzy appearance whn running and then by feelng the vibration.

Ralf | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Oct 25, 2012

Ordentlicher und leistungsfhiger Motor. Zieht meine Pitts mit 1,5 Kilo bei

knapp 30 Amp. mit 10x6 Luftschraube an 3S zuegig in den Himmel. Die Glocke zeigt optisch eine minimale Unwucht, die Vibrationen halten sich aber in tolerierbaren Grenzen. Aber Achtung: Mein Motor war fehlerhaft montiert.

Die Welle war nicht weit genug durch die Motorglocke geschoben, so dass die Madenschraube, die als Verdrehsicherung in der Glocke sitzt, nicht auf der angeschliffenen Phase der Welle zu liegen kam. Da die Madenschraube nicht gesichert war hat sich beim 10. Flug die Welle samt Propeller nach vorne verabschiedet. Also vorsichtshalber kontrollieren.

nerijuso | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Sep 23, 2012

Very good product. My place is fast enough with this motor. Maybe someone know what is replacement shaft for this motor? Has this shart hobyking? I was looking for it but I dont know which one will fit...

Graham helis | Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jun 13, 2012

smooth power for the multiplex gemini

runs well on 11x7 prop

gets over 7 mins time out of it

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!

Related Tags