Registar

Product Finder

Definições

Useful links

 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • International (Hong Kong)
  • USA

750KV Turnigy 3639 Brushless

750KV Turnigy 3639 Brushless

QTY:

Now save guardar 0,00 € 0,00 €

23,56 €
Stock:
Peso:
209 g
SKU:
T3639-750

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrição
do
Dimensão: 37 milímetros x 42 milímetros, 62 milímetros (com eixo)
Peso: 136 g (kv750) (não incluindo conectores)
Diâmetro do eixo: 5mm
Comprimento do eixo dianteiro: 18,8 milímetros
Espessura de laminação:. 2 milímetros
Tipo de magneto: 45SH

desempenho Max
Tensão: 2-3S
Max atual: 30 ~ 35A
Prop: 12x8 ~ 14x10
Thrust: 1800 ~ 2000g
Potência: 600W
Para 1500 ~ 2000g 3D modelo de avião.



Baixar arquivos de dados:
Turnigy MOTOR DE DADOS

Product
Specifications

Características do Produto

  • SKU:
    T3639-750
  • Brand:
    Não
  • Peso ( g )
    209.00
  • Comprimento
    87.00
  • Largura:
    47.00
  • Altura:
    50.00
  • Kv ( rpm / v )
    750.00
  • Correntes Max (A)
    35.00
  • Potência (W):
    600.00
  • Comprimento B (mm):
    42.00
  • Pode Comprimento D (mm)
    21.00
  • Max Tensão ( V)
    11.00
  • Shaft A ( mm):
    5.00
  • Unit Weight (g):
    136
  • Diâmetro C ( mm )
    37.00
  • Comprimento Total E ( mm)
    62.00
  • Resistência (MH ):
    0.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Although this motor is listed as a 3S motor with a maximum of 11 volts it is an excellent motor on 4S with 13" and 14" props. On 3S the current will exceed the specified maximum current of 35 Amps long before you get to the specified maximum of 600 watts. I am using one with a 4S battery with a 13" x 6.5" APC prop and it runs great. Could easily go to a 13" x 8" prop without overloading the motor. I haven't tried it with 4S and 14" props but it should be fine.

Hoby King should revise the motor specs to 4S with a maximum voltage of 16.8 volts.
Quality
Value
Overall
Quality
Value
Overall
Ordered it to mein freund. All good nice package, tight packing and all extras included.
Quality
Value
Overall
Quality
Value
Overall
Made my first three flights this morning with this motor in a Gary Wright E3D running a 5000MAH 3s. 12/7 prop pulled 30amps and 350 watts. Problem: bearings are already bad! After less than 10 minutes flying time, I have bearing noise and some prop wobble. Obviously very poor quality bearings used in this motor. Look elsewhere for your next motor.
Quality
Value
Overall
Quality
Value
Overall
Compre este motor para una piper fun cub de 1,40 metros y funciona perfecto, tiene un funcionamiento muy suave y el avion al 60pcnt de potencia trepa en vertical, ademas no tiene vibraciones ninguna y es muy economico con los consumos.
Quality
Value
Overall
Quality
Value
Overall
Use this motor in a 2.2m hotliner, in combination with a 14x8 folding prop, power is awesome
Quality
Value
Overall
Quality
Value
Overall
Pulled 54 amps and 796 watts peak on 4s with 1600g sukhoi and a 14x10 tgy light elec prop.Motor gets a little more than handwarm.Had to replace the rear bearing after about 30 flights.Good motor
Quality
Value
Overall
Quality
Value
Overall
en las especificaciones de da hobbyking de este motor dice que la tension para este motor es de 2 o 3 S pero en este link http://www.hobbycity.com/hobbycity/forum/uploads/84/TURNIGY_BR_Series.zip podeis ver que puede utilizar hasta 5 S (parece mas razonable debido a las revoluciones de este motor ( 750 Kv)) de todas formas , cual de las dos es la correcta ? debiera hobbyking hacer una revision y aclarar este termino
Quality
Value
Overall
Quality
Value
Overall
En realidad es un 650Kv, pero lleno de fuerza y muy equilibrado
Quality
Value
Overall
Quality
Value
Overall
This is an okay motor, the advertised weight is correct in the ad. I purchased this to use in my PA Ultimate AMR. It was a drop-in replacement for the Thrust 40 (size wise), fit the original holes exactly. However, I think this is more of a 4S motor unfortunately. I use a 3s 2200 25C Zippy, 13x8 Turnigy Light electric prop, only got 325 Watts and 29 amps. 13x6.5 APCe prop, got the same results. You either need 14"-15" props with lots of ground clearance or a 4S lipo.
Quality
Value
Overall
Quality
Value
Overall
I have this motor but I'm finding it difficult to find a plane that will accept it. Most planes have the motor mounted with the can in front of the mount. How can you mount this motor in planes where that is the case?
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.