Turnigy 500 H3126 Brushless 1600KV outrunner

• Overall
• Quality
• Value

Customer Rated

Apr 24, 2015

I installed this on my Bixler 2, With wings cut 6 " on each side with tons of wing reinforcement. 4s Battery and 8X4 prop 95A and 117mph! yes it is getting warm but the wind helps with cooling : ) ive had 20 high speed flights with no problems! awesome motor for the price.

• Overall
• Quality
• Value

Customer Rated

Jun 12, 2014

I saw this motor being used on a video on RCFoamFighters in a Funjet. Had to have it for my Funjet Ultra. This motor screams. I have about 40 flights on it with no issues. I did bend a shaft after a rough landing on flight #5, but replacement was simple. Clocked my Funjet at 149 MPH with a gun. Took the motor apart after flight #35 and can see no evidence of how hard I've pushed it. And since this motor only costs around $20 I've pushed it hard. Highly recommend.

• Overall
• Quality
• Value

Customer Rated

Apr 23, 2014

Hello EDF pilots. Not one like this little beast is great in EDF 90 / blades Haoye EDF !!!!! NOT ONE !!! Believe me. I used this motor 4 ways, in 4 edf's jet 90 mm: MB339 flyfly, for example. Rock, perfect, huge power, plenty efficience. In 3,5 Haoye fan it produce, with 6s 5000 30c, 2,8 kg of thrust with 73 amps. Forget other motore for this blades configurations. This is only the one!

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 20, 2014

What a cracking good motor. Zero vibration, quiet and remains cool after giving it a good hammering in a T-Rex500. Well recommended.

• Overall
• Quality
• Value

Customer Rated

Feb 01, 2014

I'm using this motor on a HK500TT FBL, and it's been good so far, about 50 flights to date. The motor comes with 3.5mm bullets already fitted, and some M3 socket head bolts with plain and lock washers, which I really like. The lock washers work really well, so I don't need to use any threadlock, which means I can adjust my pinion mesh in just a few seconds. The motor was perfectly balanced, and seems to put out good power. It's a re-branded Suppo motor, and I've had good experiences with the smaller ones on my 450's.

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 17, 2013

Jetzt Brennt der Himmel

Im Dogfighter TOP

• Overall
• Quality
• Value

Customer Rated

Aug 03, 2013

Great motor! Solid construction, reasonable size bearings & tight windings. Included hardware are 4 screws with washers & lock washers! Using mine on a TREX 500, 17T pinion and governed to 2400rpm IDL1, 2600 IDL2 on a ICE 75 ESC...Plenty of headspeed & power...Outstanding value!!

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 20, 2013

runs perfect, I am using it on a plane on 3 cells...realy good performance and totaly no heat.

• Overall
• Quality
• Value

Certified Buyer Rated

May 28, 2013

Not powered this motor up as yet as building another hk500 heli using this motor and yep 80a esc, very good power would defo recommend this motor

• Overall
• Quality
• Value

Customer Rated

May 12, 2013

Ein sehr starker Motor. Ich habe ihn zusammen mit dem ss100 Regler in meinem Kyosho Inferno NEO Race Spec. Unglaubliche Beschleunigung sehr agil und schnell.