Turnigy 600 H3736 Brushless outrunner 1000kV (600 Classe Heli)

• Overall
• Quality
• Value

Customer Rated

Nov 04, 2013

I've been using this motor for quite long and was happy with it. Now I have to replace it as shaft is getting wore out (eroded) at the exit bearing. As measured normal shaft diameter is 6.93mm, at the bearing is 6.81mm and the bearing inner diameter is 6.99 so there is some play there. At high rpm this can probably cause more damage.

• Overall
• Quality
• Value

Customer Rated

Aug 17, 2012

I use this motor on Radikan E640 in normal and sport flight with 620mm blade! works very well with YEP/sunrise/helidrive ESC in governor mode.
The temperature at the end of flight is normal( about 45-50 celsius).
A good choise for all 600 classe elicopter. I use 2x6s 2600 lipo.