Turnigy SK3 Motors são o próximo salto de qualidade do motor e design. Nós instruiu os engenheiros para adquirir os melhores de qualidade em ímãs, rolamentos e materiais disponíveis para eles e desenvolver um motor que não só rival, mas superar a qualidade de muitos motores principais fabricantes no mercado hoje.
O resultado é um eficiente, alta motoras calibre usando qualidade rolamentos blindados duplos, neodímio sinterizados ímãs e um estator corda enrolada assegurar um precisas e consistentes de enrolamento de cada vez.
Os motores Turnigy SK3 são adequados para modeladores que procuram um motorqualidade sem compromisso.
RPM / V: 3100
Resistência interna: 0,18 Ohm
Max Loading: 5A
Max Power: 42W
Shaft Dia: 2,0 milímetros
Peso: 17 g
Motor Plug: Conector de 2 milímetros de bala
Características do Produto
Peso ( g )
Kv ( rpm / v )
Correntes Max (A)
Comprimento B (mm):
Pode Comprimento D (mm)
Max Tensão ( V)
Shaft A ( mm):
Unit Weight (g):
Diâmetro C ( mm )
Comprimento Total E ( mm)
Resistência (MH ):
Great motor if you want to turn the bonsai wing into a rocket, 2s lipo and this thing screams, unlimited vertical, i like it!Mounted it my Bonsai, proceeded to try to stretch the o-ring on (the screws have no clearance), gave up and tried to loosen the screw on the prop saver and it just snapped off leaving half of it unmoved and flush to the motor bell. I'm now 15$ poorer and no closer to getting in the air. Dont buy this crap.A bit heavy , but really sturdy ( a plus for me )
runnin on 2S with a t.gy plush 6 amp ESC
on a 133 gram depron model (Kawasaki KI-61 reproduction 560mm wingspan)
the 4.1X4.1 prop is the best , with a 25 C 500 ma zippy 2S I fly for about 7 minutes , and I like speed :-) .
The 4045 is a bit faster , but requires fast hand launch : my small plane runs up to 80 km/h .
If you plan to use this motor , build everything strong - it flies fast !Motor macht einen guten Eindruck, luft sauber und rund.I had this motor on a small plane I built for racing, and I have gone into the ground at 60-70mph the motor going in 5cm several times and it still works like the day I bought it. I will be buying more.They are well built on the outside, but has timing/quality issues. Ordered 8 of these for use with Afro 12A and other SimonK ESC's. The motor lost power momentarily, sometimes causing a crash. After error-searching my tricopter for a whole weekend, trying different SimonK versions, reverse version etc (18.6.2014), even trying to add capacitor, I still got hiccups. Replacing the motor did the trick.This is a fantastic little motor for the Bonsai.
Great performance , small , light , built in prop saver ...great product.great little motor, had it mounted in a little wing and it went off the hook, smaller than I thought but purrs like a kitten, totally recommend thisDecent tiny little motor, pulling about 6.8A with a 5.3 prop on a 2s nano-tech. Wish the prob saver was a tiny bit longer just to hold on a bit more but works well enuff.I have bought 4 of them. 1 has loose copper wire inside the bell and stuck between the bell and stator.