Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Turnigy AquaStar 4084-620KV resfriada a água sem escova Motor

Generating Links

Turnigy AquaStar 4084-620KV resfriada a água sem escova Motor

Preço:

Now save economize 0,00 € 0,00 €

72,02 €
Enviado de:
  • USA
  • International (Hong Kong)
Já comprado
Tempo estimado de chegada: Mid May 2024 [ ? ]
Status:
Indisponível!
SKU:
9192000092
Envio Grátis? Clique aqui aprender mais!

Os Turnigy AquaStar Brushless Sensorless Motors oferecem excelente desempenho para o seu barco a um preço incrível!

Com um motor de qualidade CNC billet usinado T6 de alumínio pode, de alta pureza enrolamentos de cobre enrolado à mão e poderoso ímã de neodímio sinterizado, você não vai encontrar um motor melhor preço deste calibre em qualquer outro lugar! Ele ainda apresenta uma jaqueta de arrefecimento de água de alumínio de boleto pré-instalado.

Os motores brushless AquaStar são uma ótima opção para o seu deep-V, hídrica ou catamarã barco de corrida e terá a certeza de deixar a competição em sua vigília!

Características:
• CNC usinadas Billet T6 alumínio motor pode
• Pureza Copper Windings alta
• Conectores de 4 milímetros de bala pré-instalado
• Poderosa sinterizado neodímio ímã
• Engineered precisão para conversão de energia máxima
• camisa de arrefecimento de água pré-instalado

especificações:
RPM / v: 620kv
Winding: 2,5Y
Tensão máxima: 37V (10S)
Max atual: 105A
Max Watts: 3050W
Resistência: 0.03ohm
Sem carga atual: 0.7A
Pode Diâmetro: 39 milímetros (diâmetro real do motor)
Pode Diâmetro inc. Jacket água: 49 milímetros
Comprimento pode: 84 milímetros
Tamanho do eixo: 5mm
Peso: 508g
Motor Conector: 4 milímetros plugue bala

  • Kv ( rpm / v ) 620.00
  • Correntes Max (A) 105.00
  • Resistência (MH ) 0.00
  • Max Tensão ( V) 37.00
  • Potência (W) 3050.00
  • Shaft A ( mm) 5.00
  • Comprimento B (mm) 84.00
  • Diâmetro C ( mm ) 39.00
  • Pode Comprimento D (mm) 79.00
  • Comprimento Total E ( mm) 103.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • Turnigy AquaStar Motor
  • Turnigy Aquastar 4084 620kv
Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

John S | Comprador Verificado

  • Overall
  • Quality
  • Value

Very powerful motor

Apr 11, 2022

Bought two of these to power a 150 cm Fairey Huntsman model. One had a water jacket leak, but was replaced with out quibble, though it took some 6 weeks from reporting the fault to receiving the replacement which came from China. Running through two 150 amp ESC's and coupled to 4 12v lead acid batteries (Two sets of series coupled in parallel, giving 24 Volt 14 amps) they run very well. Two brushless water pumps provide consistent cooling to these two motors, they have given no trouble and provide ample power to drive the boat forward.

Master Mariner | Comprador Verificado

  • Overall
  • Quality
  • Value

Mixed feelings

Feb 08, 2022

I bought two of these to power a 150 cm Fairey Huntsman model. After installing them I tested the cooling system by using a 2cm dia syringe. Both motors leaked. However I found the cause of the one to be loose pipe connectors, this cured the problem on the one motor, but the other was leaking from the water jacket seal. I made a claim using the online claim form and was instructed to return it to a UK based company. Response from HobbyKing was pretty quick. Only posted the faulty unit yesterday, so waiting to see how quick the replacement arrives. All a bit frustrating as I was ready to test this new model out on the water.

JBS | Comprador Verificado

  • Overall
  • Quality
  • Value

Good powerful motors

Jan 20, 2022

I bought a pair of these to power a large (1.5 mtr) boat. Mounting them was straightforward as they have two sizes of mounting screw holes at the spindle end. I've just finished installing the electric to operate the boat but have not had chance to run it yet. But I expect with the 3 12 volt batteries running in series they should give plenty of power to drive the boat at good speeds.

maus | Comprador Verificado

  • Overall
  • Quality
  • Value

high stability

Apr 01, 2021

good quality, much performance

Grandad42 | Comprador Verificado

  • Overall
  • Quality
  • Value

Great Motor

Dec 23, 2019

Nicely engineered and works well.

Grandad | Comprador Verificado

  • Overall
  • Quality
  • Value

Second One was Fine

Dec 13, 2019

The first one had a water leak where the "O" ring had popped out during assembly. A replacement was sent out immediately and was fine. Not pushed it hard yet but early signs are promising.

ok | Comprador Verificado

  • Overall
  • Quality
  • Value

ok

Nov 04, 2019

ok

unterwassermaroder | Comprador Verificado

  • Overall
  • Quality
  • Value

very powerful

Oct 10, 2019

A very good inrunner for very fast submarines. My new Orca 1:10 is very very fast. He jump out of water by weight 15 kg.

Boat Sparks | Comprador Verificado

  • Overall
  • Quality
  • Value

Excellent product.

Sep 29, 2019

Good quality and very smooth. Plenty of horsepower. I have two of these powering a 27 kilogram game fishing boat.

clifford | Comprador Verificado

  • Overall
  • Quality
  • Value

Prop size

Apr 04, 2017

What is the recommended prop size for this motor ? i cant find any details anywhere
id like to run on 8s , but with the biggest prop and low speed for high thrust.....
please mail me at clifford@uni-foil.com

  1. 1
  2. 2
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!