New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Turnigy de Bell 2409 1600kv Outrunner

Turnigy de Bell 2409 1600kv Outrunner

Discontinued Product

Please continue searching for a similar product.
SKU:
TR_2409_1600
WANT FREE SHIPPING? Click here to find out more!

O motor Turnigy sino parece e funciona exatamente o mesmo que o Towerpros, a 2/3 do custo!

Turnigy de Bell 2409 1600Kv

Peso: 56 g
Tensão: 10v (2 ~ 3 celular pacote de lipo)
Ociosa atual: 0,9
Kv: 1600
Shaft: 3mm de diâmetro
Max eficiente atual: 15A
Carga máxima: 20A
Saída de potência máxima: 180W
Sugeriu Hélice: 9x3.8 E- Hélice

* Este não é feita por TowerPro.

  • SKU TR_2409_1600
  • Brand Turnigy
  • Peso 87.0000
  • Comprimento 0.00
  • Packaging Width 0.00
  • Altura 0.00
  • Kv ( rpm / v ) 1600.00
  • Correntes Max (A) 20.00
  • Resistência (MH ) 0.00
  • Max Tensão ( V) 10.00
  • Potência (W) 180.00
  • Shaft A ( mm) 3.00
  • Comprimento B (mm) 37.00
  • Diâmetro C ( mm ) 31.00
  • Pode Comprimento D (mm) 12.00
  • Comprimento Total E ( mm) 64.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Katalog bilgileri dahilinde kullanlabilir bir motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Katalog bilgileri dahilinde kullanlabilir bir motor.

With Towerpro 8x3.8 prop and Turnigy 3S1800, I measure 10.6 volts, 26 amps, 277 watts. A pleasant surprise since it's more power than the similar Towerpro motors, but a little disappointing since I was using a 25-amp controller! Controller got warm and cut out, should be OK. This is one of my favorite battery/motor/prop combinations, I'll see about getting some 30-amp controllers.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

With Towerpro 8x3.8 prop and Turnigy 3S1800, I measure 10.6 volts, 26 amps, 277 watts. A pleasant surprise since it's more power than the similar Towerpro motors, but a little disappointing since I was using a 25-amp controller! Controller got warm and cut out, should be OK. This is one of my favorite battery/motor/prop combinations, I'll see about getting some 30-amp controllers.

nice motor good and economic

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice motor good and economic

Superior engine for small money.

Works very well and has a lot of power.

It is much better prepared and better than the same product TowerPro.

5 stars!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Superior engine for small money.

Works very well and has a lot of power.

It is much better prepared and better than the same product TowerPro.

5 stars!

I give this motor 5 starts becuse of how powerful it is but DO NO use any bigger prop then 7x5 or your frie ur motor as i did to two of mne :P sucked , but theres a looooooad of poer in this baby.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I give this motor 5 starts becuse of how powerful it is but DO NO use any bigger prop then 7x5 or your frie ur motor as i did to two of mne :P sucked , but theres a looooooad of poer in this baby.

i made a set up for my axn floater and because i don't have the choice I use this motor with a 6x4e prop with 4s 2200 zippy and give me a good performance at 245watt and 15 A at full trottle but anyway the motor have enougth cooling so for now leave it like that but if can find a 2200kv motor will be better !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i made a set up for my axn floater and because i don't have the choice I use this motor with a 6x4e prop with 4s 2200 zippy and give me a good performance at 245watt and 15 A at full trottle but anyway the motor have enougth cooling so for now leave it like that but if can find a 2200kv motor will be better !

als Alternative zum Towerpro

2409-12T

noch nicht getestet.

Qualitativ guter Eindruck !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

als Alternative zum Towerpro

2409-12T

noch nicht getestet.

Qualitativ guter Eindruck !

Energy saving motor when use it on 7x6E to fly parkjet. you can easily fly 8-10mins with 2200mah 3s. But the shaft is unchangeable making it less perfect

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Energy saving motor when use it on 7x6E to fly parkjet. you can easily fly 8-10mins with 2200mah 3s. But the shaft is unchangeable making it less perfect

TGS 8x4E, 3S 1300 Turnigy 20C, Tower pro 40A - 200W for F4U fighter "pirate" or ME-109 from HK

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

TGS 8x4E, 3S 1300 Turnigy 20C, Tower pro 40A - 200W for F4U fighter "pirate" or ME-109 from HK

The magnets are strong and seems like stopping the bell from rotating easily. But checked again and powered it with 2200mAh 2S Lipo. The motor runs fine. Nice product for the price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The magnets are strong and seems like stopping the bell from rotating easily. But checked again and powered it with 2200mAh 2S Lipo. The motor runs fine. Nice product for the price.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!