Turnigy Sino 2409-18T 1200KV Outrunner

• Overall
• Quality
• Value

Customer Rated

Jun 19, 2011

With a fully charged Zippy Flight max 20C 1300mAh 3S and a GWS 8x6 prop :
Power (W) - Thrust (gram)
10w - 60g,
20w - 80g,
30w - 150g,
50w - 210g,
60w - 240g,
70w - 280g,
90w - 340g,

With the same set-up, the Kv1000 will give better results (see review of the kV1000).

• Overall
• Quality
• Value

Certified Buyer Rated

May 18, 2011

Not that impressed with this product. I bought for my ME109 and it seems similar to the 1300 KV motor in looks but the performance dos not match. The 3 mm shaft snapped after a crash, replaced it with the Towerpro 2409 replacement shaft. They almost fitted perfect but ended up bending in the test bench at 5-600 grams of trust. The motor was very hot after this test.

• Overall
• Quality
• Value

Customer Rated

Apr 28, 2011

swapped the stock motor with this one in my minimoa using the stock 11 inch folding prop. no problems with heat since i used the motor climb and then glide most of the time. good motor. has enough power, efficiency for the price. great buy.

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 21, 2011

Super fr den Preis. Nutze Sie als Ersatzmotor fr :HKMini-YAK54

und 1HK6 Mini P-51 (Mustang)

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 15, 2011

good item to,this product is worth its

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 09, 2011

EXCELLENT motor! Very nice quality and super performance!

Buy it with full satisfaction!

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 04, 2011

Nice little motor. Overheated and burnt the motor and speed controller out with 9 x 3.8 prop on 3S lipo. Seems fine on smaller 8 x 3.8 prop. Very good price.

• Overall
• Quality
• Value

Customer Rated

Feb 22, 2011

Doesn't look the best motor, and seemed stiff to turn by hand.

However, it was not expensive and it was bought for a small Cessna as a replacement for the original motor.

Using a 25A ESC and 3s 1300 Max Tipple batteries

GWS DD 8x4 = 90W @ 8A

GWS DD 8x6 = 140W @ 12A

I will update this post when it is fitted and has been flown.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 08, 2011

Run this motor on My super Cub and HobbyKing YAK 54 Brushless EPO Plug-n-Fly

after 10min flight with 1300mAh 11.1V 20C, the motor is warm.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 03, 2011

Otimo motor, parecido com E-max 2822 .. recomendo