Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • USA

Turnigy BLS950 Digital Brushless cíclica Servo 11,5 kg / .12sec / 56g

Turnigy BLS950 Digital Brushless cíclica Servo 11,5 kg / .12sec / 56g

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
147 g
SKU:
BLS950

Combine

essential items and
acc
Descrição
do

Turnigy BLS950 Digital cíclica Servo é projetado especificamente para a força, resposta suave e desempenho de vôo 3D heli última análise extrema.
Este servo possui um motor sem escovas, o que reduz o atrito e ruído, aumenta a vida útil do motor e opera a uma temperatura mais baixa do que um motor escovado além de que também dá um tempo de resposta de 30% mais rápido e um menor vibração que anúncios Servo precisão. O trem de engrenagens de titânio usinado-micro com rolamentos de dupla garante uma engrenagem forte e suave. Se você abrir a caixa do servo você vai notar nenhuma marca de usinagem sobre as engrenagens. Da fábrica que produzem estes motores trabalhar em tolerâncias extremamente apertadas. Você não vai encontrar estas engrenagens sendo produzido em uma fábrica interior da China.
O Turnigy BLS950 só é comparável aos servos japoneses muito high-end.

Compatível com pulso (760μs) unidade Super Narrow.

Especificação:
Banda morta: 0.0008ms (Padrão)
Sistema de controle: + Largura de Pulso controle
Trabalhando frequence: 1520μs / 333hz
Pulso (RX) Requerido: Pico de 3,5 ~ 6,0 Volt para Peak Square Wave
Tensão de funcionamento: 4.0 ~ 6.0 V Volts DC
Faixa de temperatura operacional: -10 a + 60 graus C
Velocidade de operação (4.8V): 0,14 seg / 60 ° graus sem carga
Velocidade de operação (6.0V): 0,12 seg / 60 ° graus sem carga
Stall Torque (4.8V): 9,2 kg.cm (127,8 oz / in)
Stall Torque (6.0V): 11,5 kg.cm (159,7 oz / in)
360 ° modificáveis: NÃO
Tipo de Motor: Brushless
Potenciômetro de Drive: Movimentação indireta
Tipo de rolamento: Dual Rolamentos
Tipo de transmissão: Engrenagens Titanium
Programável: NÃO @
Comprimento conector de fio: 24,0 cm (9,4 in)
Dimensões: 40 x 20 x 40 mm (1.57x0.79x1.50 in)
Peso: 55,8 g (1,96 onças)

Product
Specifications

Características do Produto

  • SKU:
    BLS950
  • Brand:
    N/D
  • Peso ( g )
    147.00
  • Comprimento
    0.00
  • Largura:
    0.00
  • Altura:
    0.00
  • Speed ​​( Sec / 60deg )
    0.12
  • Torque ( kg) ( min. 0,01 kg )
    11.50
  • Unit Weight (g):
    56
  • A ( mm ):
    45.00
  • B (mm)
    41.00
  • C ( mm )
    41.00
  • D ( mm ):
    21.00
  • E ( mm):
    55.00
  • F ( mm )
    28.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I've been fying with these in my Trex 600n for a year now. Still working really well and just gone V-Bar using same. Wow!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
voila enfin du BLS a un prix competitif,ces servo sont exeptionnel en precision au cyclique,sur mon Srimok 90E KASAMA ils font des merveilles,je les utilise avec un beastix sans probleme en 6Volts pour du 3D,plus de 600 Vols a leur actif et toujours rien a redire...
Merci beaucoup HK!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a very good brushless servo, even slightly better than the futaba brushless servo's.

It's made by MKS and relabeled Turnigy by Hobbyking.

And for a great price! thank you Hobbyking !



test vid's here:

http://youtu.be/2OCZvEKiX9s

http://youtu.be/76wrWqpgpG0
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is, in my opinion NOT are full or real Brushless Servo. I would call it Semi-Brushless



Its got a Brushless Motor, for sure. But the Servo Amplifier used is a Version for DC-Motors, linked to a DC-BL Converter. (2 pcb inside)

Thats why the Servo behaves like a Servo with DC-Motors.

Elektronics seem to bee build for 7,2V, but above 6,3V it shows massive overshoot and centering problems/jittering.( Just like DC-Motor servos do)



The Poti inside looks like a cheap Pertinax-type, most probably this will be the lifetime limiting Factor. But the Performance shown at 6V is very good, no Play in Gears, good centering.

Fast enough for Trex600.



But technically ( Electronics) far behind a Futaba BLS, which is Full BLS including Brushless Amplifier.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
MKS Turnigy BLS 950

Hab heute meine BLS 950 bekommen.

Ein erster Test - Die Geschwindigkeit haut mich nicht vom Hocker, aber es luft unaufdringlich, das Getriebe ist bemerkenswert spielfrei.
Max gemessene Stromaufnahme ( gemittelt) 0,8A. ( Spitzen mgen etwas hher sein.
Auffllig ist auch da es, wie viele Digitalservos auch im Leerlauf kurze hohe Stromspitzen zieht. Mein zum Testen verwendetes HK-Billig BEC gibt dabei Gerusche von sich, die lauter sind als das Servo.
Mit 1000uF Elko dran ist das weg.
=> Solche Servos an BEC`s nie ohne Pufferelko betreiben.
Da die Futaba neuerdings fr 7,4V zugelassen sind, wollt ich wissen wie das mit den MKS aussieht.
Ich habs geffnet, und auf der 2.stckigen Platine u.A. einen FR6461 Servocontroller gefunden :
www.kcsemitech.com/uploadfiles/.../2009031817014912.pdf
Dieser ist fr 7,2V zugelassen. Da KCS ein rein chinesischer Halbleiterhersteller ist, wrd ich das nicht voll ausreitzen.
Beim Betrieb an 7.0Volt zeigen sich massive berrschwinger und Nullpunktsprobleme. ber 6,3V hinaus scheint es nicht brauchbar.
Die Geschwindigkeit steigt aber merklich.
Die Erklrung offenbart sich beim Blick auf den verwendeten Servocontroller. Dieser ist ein Servocontroller fr Brstenmotoren. Nachgeschaltet ist eine Wandlerplatine DC=> Brushless. Dies erklrt warum sich das Servo wie ein Servo mit Brstenmotor verhlt. Der Vorteil von BLS-Motoren, Steps wie ein Stepp
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
excellant servo from HK. i just got few days back and they are quiet and centering is very good, and not having any play in gears. i have put it on hirobo tarbulance D3.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The BLS950 work fine, dead band 1us or less.
Speed and torque like announced.
Gear do not have play, although is a little to tight.
But the consumption at stop is too high,
something around 90mA,
witch would can require a battery of more capacity than usual.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Definitely the best digital servos available here. They have great holding power, resolution, center extremely well and are very quiet for digitals. Gearbox is smooth and slop free. Highly recommended.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
ok,fly these on cyclics on a Compass 6HV for a summer now. Still running on 4.8v and well over 100 flights on them.

GREAT SERVOS! still running strong , no slop at all in them.

Using futaba super strenght (black) arms with them. Flying hard to really hard 3-D at 13.5+- pitch , 50c 12cell.

They are holding great, without any weakness in any of the set of 3.Would buy more no questions asked.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have 3 Turnigy BLS950's fitted to my FBL Gaui X5. They centre well, operate really smoothly and run real quiet compared to the DS610's I had. I highly recommend them for any heli setup, quick and good holding torque at 6V!



Grant
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Combine

essential items and
acc

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.