A série Turnigy possui características tais como grandes correntes de ruptura, quebra programável e reversa, baixa resistência, 2-3 células Lipo peso capaz e baixo.
Cont. Atual: 35A
Explosão atual: 190A
Tamanho do carro: 1/10
Motor sugerida: Cerca de T9 / 3650kv
Bateria: 2-3 celular Lipo / 4-9 celular Ni-XX
BEC: 6V / Output 1.5A
Tipo de Motor: Brushless Sensorless
Tamanho: 31,5 * 27,5 * 24 milímetros
Peso: 30 g
Todos os Turnigy de são programáveis através do cartão programação digital Turnigy.
Características do Produto
Capacidade ( mAh)
Peso ( g )
Bought a couple of these, just as well, one died pretty quick, no sure why ;(,
Also noticed they have 7.2V on the side of them, this can't be right as they can handle 11.1v max, I'm pretty happy with these as my 60A Turnigy ESC lasted over two with abuse.Excellent ESC, have purchased many of these, only wish the fan wasn't wired the way it is requiring modification or the high voltage fan for more than 7.2v.Levny regulator do HIMOTOA must !
Mounted on a mini inferno, it gives powerfull accelerations, and very smooth startups. This last point was very important to my point of view, and I'm happy with it.
The only 2 "problems":
-The battery plug was not pictured, so I was waiting XT60 or nothing; in fact it was what I think to be a Tamiyia-style. Cut and replaced by XT60.
-The fan is rated for 2S max, while I run my car on 3S, so I soldered the positive wire to the BEC, and it runs fine this way.QUEIDOS FRIENDS BUY A SHORT COURSE IN HobbyKing AND NOT ONLY THAT I CAME BROKEN BODY BUT ALSO COMES THE ESC 35A SET ME SOMEONE CAN EXPLAIN WHY NOVIENE how to set the manual on how HACRLO, THANKS FRIENDS hobbyistsI now have quite a few of these for my "not so powerful" cars, and they have never let me down.I have purchased recently, is working with perfection, I have tried with a 6.5T brushless at 50pcnt and works fine. I used at full power with the 6.5T for a while and works fine as well, at the moment is not warm or hot, the batteries I've used are zippy 20C 5000mA and fine at the moment, I recommend a lot!.Recibido hace una semana, montado en reedy neo 1 con lipos 30c y al 100pcnt de capacidad no se calienta, al menos de momento. muy recomendable pese a ser sensorless.Works very good with my 1/10 Buggy! Which exact programming card is usefull for this ESC?? I am nor sure to buy any one without any suggestions! Thanks!I put one of these with ez-run 9t and original pinion gear in a traxxas stampede. work good, but sometimes it will stop due heat.
better go this car/motor/pinon with 60a speed.
But if you dont use(or abuse) so much, its a very good speed.