Turnigy GliderDrive SK3 Series Concorrência - 3850 - 3,5 960kv

Using this motor in a Multiplex Solius. Fits well with a little trimming of the hatch. With a YGP 45A ESC it works very well with the Multiplex supplied 12" folding prop. Spectacular climb rate in 3 cells. Can't measure current. Quiet and very powerful. High qualty motor.

Sind gute Motoren. Ich habed en mit 1120 KV und 4s und 12x6 Prop in einer Pilatus PC6 zum schleppen.

I have this motor in a 4M ALES glider 1940g with a 12X6 prop. Pulls 30A at 10.8V gives 7800rpm. I have it in a CLM Pro fuse that fits perfectly. Last year I ran it with a 3 Cell 1300mAh battery and was able to get to 150M easily in 30 sec. This year I will use a 4 cell and have practiced getting to 200M in 25 seconds repeatedly. It pushes the limits a bit at 41A and 14.8V with the 12X6 prop, but it's a 25 sec run. I might try it with an 11X8 prop, I hear that works pretty well.

LOVE this motor !
I installed it on Radian glider. It is extremely quiet running on 3S LiPo and a 12x8 APC folding propeller. It needed a 5mm collet adapter, which I had in my parts bin. It climbs like a rocket ! again, it is so incredibly quiet. The fir in the radian is very good. It is heavier than stock, but it is worth it for me.

A powerful motor. Swinging a 10x6 prop, my 1600 Phoenix climbs away vertically. Probably adds 60pcnt speed increase to the Phoeinix over stock set up.

Very nice motor with high quality bearings. Perfect for my MPX Solius with Aeronaut 10x6 prop. (3S 2200mAh - ~27A)

"OK" not "GREAT". "BETTER THAN SOME". in terms of quality. Comes in pretty box but no spec shhet nor even the 4 3 mm screws required for mounting, nor any indication of the size of bullet connectors requied to connect ESC. This feedback will hopefully be read by HK-the 3mm screws I purchased from you (THAT DELAYED MY BUILD) ARE NOT A TIGHT FIT. OK maybe with loctite I'll be lucky. But WOW either include the screws and mounting bracket OR SPECIFY REQUIRED/NOT INCLUDED. It's the little details that take the stars away because of the hassle factor. 960kv? REALLY??? perhaps a little optimistic. Not as efficient as I had hoped BUT perhaps that's "THE MISSING SCREWS TALKING:)

Fits flawlessly into the nose of a Great Planes Siren. If your goal is to just climb and then shut the motor off, I'm sure the 12x6 prop is fine, but for me, on 3s, the 12x6 was waaaay too slow. On 3s, the 11x8 carbon-fill prop you can get here on HK is much, much better. From the hip, it speeds things up nicely, has plenty of thrust and draws about the same current. I stuff two 2200mah 3s batteries in the nose and get about 11 minutes of motor-on time, ending aroung 3.75v per cell. I'd love to try this on 4s. Quality motor! I'm happy with it.

Lush. Wanted one for a while. Used on ask21 2.6 M span 4s. Flies great.

These are the full Monty go like the clappers 3cell a beast of a motor aplus