Registar

Product Finder

Definições

Useful links

 
[["US","AU","GB","DE"]]
Registar

Turnigy L2855-2300 EDF Outrunner (450w)

Turnigy L2855-2300 EDF Outrunner (450w)

Now save guardar 0,00 € 0,00 €

11,94 €
Indisponível!
Stock:
OUT OF STOCK
Peso:
131 g
SKU:
L2855-2300

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrição
do
Turnigy L2855-2300 EDF Outrunner (450w)

Spec.
Kv: 2300 rpm / v
Voltagem: 14.8V (4S)
Nenhuma corrente de carga: 2.2A
Max atual: 26A
Max Power: 450W
Tamanho do eixo: 4 milímetros
Comprimento do eixo: 16mm
Dimensão: 34 milímetros x 28 milímetros
Thrust: 900g
Peso: 97 g
 
Product
Specifications

Características do Produto

  • SKU:
    L2855-2300
  • Brand:
    Turnigy
  • Peso ( g )
    131.00
  • Comprimento
    92.00
  • Largura:
    44.00
  • Altura:
    55.00
  • Kv ( rpm / v )
    2300.00
  • Correntes Max (A)
    26.00
  • Potência (W):
    450.00
  • Comprimento B (mm):
    34.00
  • Pode Comprimento D (mm)
    26.00
  • Max Tensão ( V)
    15.00
  • Shaft A ( mm):
    4.00
  • Unit Weight (g):
    97
  • Diâmetro C ( mm )
    28.00
  • Comprimento Total E ( mm)
    72.00
  • Resistência (MH ):
    0.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Reliable Setup, Tested with INLETLIP & Nozzle dia. 62mm: L2855-2300KV & Changesun CS 70-12-Blade. Max. good for 4S (used SLS 2650mah) , used ESC: Hobbywing 100A Pentium, Timing 15, PWM 12 Khz. Starting at 63A / 890W settled at 58A / 840W = 2,8 kg static thrust (NOTE: Static thrust means NOTHING at all ! The CS 70-12-blade due its very rigtht angled blade design has a quite bad eflux, if nozzle <62mm the airflow brakes dow a lot - meaning your jet will not do to high speeds. I used in the same jet before a WemoTec Pro 70mm 9-blades - and it was going MUCH faster, even on a 56mm nozzle).
For a not to fast Foamy Jet the above combination L2855-2300 & CS12-blade might be a nice option - nice almost steahlth soung and a good thrust for starting & landing manouvres.
Quality
Value
Overall
Quality
Value
Overall
Great Motor on 5s turning Changesun 70mm 10 blade. Interesting mod. The CS10 EDF housing is very inefficient due to the blades at 90 degree to the fan. Use the Freewing 70mm housing with Changesun fan. More thrust and 48 Amps settled.
Quality
Value
Overall
Quality
Value
Overall
So far this has been a good motor but my main gripe is that it doesn't come with the mounting screws and they are hard to find.
Quality
Value
Overall
Quality
Value
Overall
Like ANLUCAS in the discussions above I too am using the L2855 2300kv motors in combo with both the CS10 & 12 fan units on 5s lipos. So far they have been thoroughly reliable even though they are punching way above their weight pulling 1100-1200 watts @ around 60 amps. Yes they do get hot but I only ever use full throttle for take offs & launches as well as the occasional burst while flying.
I have one in my Durafly Vampire which has had dozens of reliable flights & another more recently in my Lander Panther. They are quiet & smooth & provide good thrust as well as sounding amazing. I have tried 2 expensive Cyclone inrunners on these fans but found both to have warped shafts straight out of the box. For a third of the price these little motors are a stand out bargain.
Quality
Value
Overall
Quality
Value
Overall
I am using this motor with a 70mm 12 blade Change Sun EDF, 6s 2200 60-120 burst battery through an 80 amp esc. this motor works great. Turnigy have built in so much redundancy to this motor it handles this set up effortlessly.
Quality
Value
Overall
Quality
Value
Overall
Used on the HK Vampire with a CS70 10 Blade fan, Turnigy 3ooomah 4S 30C Batteries and std Vampire esc. 20gms of thrust down on the standard vampire fan/motor combo, but flew fine and what a great sound!!! Will try 5S though. Great motor Hobbyking...
Quality
Value
Overall
Quality
Value
Overall
I have this motor working on 5S 2250 Nano esc 75A esc.
Which the best timing setup for it?
Low, medium or high?
Quality
Value
Overall
Quality
Value
Overall
great motor i use it i the 10 blade fan on 6s 2200 mah 25c-50c nano its pulling 1200 watts and about 50amps motor always comes down quite warm but cooling isnt great. in the fan ive made some holes in the case on the fan for better cooling it can definately handle 6s.
Quality
Value
Overall
Quality
Value
Overall
I purchased this motor to power one of the new 10 blade 70mm fans from Hobbyking. Before flying it in my L39, I bench tested it with 4s and 5s batteries. With 4s I was drawing 16 amps at full throttle, about 250 watts. Unfortunately, at this power level, the L39 will just not fly. With the 5s it drew 25 amps and flew about 50 yards. It just would not accelerate to a flying speed. I am flying at 4000 feet, so it might work better at sea level. I don't think you want to use this with a ducted fan and a 4s or maybe even a 5s battery. BTW I tried it with a 5 bladed fan and had the same result.
Quality
Value
Overall
Quality
Value
Overall
Very happy nice upgrade for my rebel 70 jet used it with the upgrade fan available for hk
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.