Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Turnigy L3040A-480g Brushless

Generating Links

Turnigy L3040A-480g Brushless

Preço:

Now save economize 0,00 € 0,00 €

19,33 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
L3040A-480G
Envio Grátis? Clique aqui aprender mais!
Turnigy L3040A-480g Brushless

Especificações:
Dimensão: 38 milímetros x 46 milímetros
Peso: 194 g
Kv: 480rpm / V
Voltagem: 22.2V (6s)
Max Power: 1000w
Max atual: 52A
Nenhuma corrente de carga: 0.8A
Diâmetro do eixo: 5mm
Thrust: 2100g
ESC: 80A ~ 60A
 
  • Kv ( rpm / v ) 480.00
  • Correntes Max (A) 52.00
  • Resistência (MH ) 0.00
  • Max Tensão ( V) 22.00
  • Potência (W) 1000.00
  • Shaft A ( mm) 5.00
  • Comprimento B (mm) 46.00
  • Diâmetro C ( mm ) 38.00
  • Pode Comprimento D (mm) 30.00
  • Comprimento Total E ( mm) 65.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

David | Comprador Verificado

  • Overall
  • Quality
  • Value

Great motor, but needs some improvements.

Dec 08, 2016

I have tested three of these motors over several years on 3.5 to 5 lb airplanes. It is an excellent motor in it's power output vs efficiency and weight. It has some slight cogging vibration and could use better bearings. Better yet tweek the cogging out, put better bearings in, balance it, include a mount and can end prop adapter. Charge an appropriate price increase, I'll pay it with that tweeked out. I just can't seem to find anything else that does the same job.

zedooo | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 25, 2013

Sick motor! I don't know why is it so cheap!

acrozic | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 25, 2013

Got the motor and tried it on several batteries with different loads.
Very low efficiency motor on 4S battery - 450W 4S 17x8 or 500W 4S 16x10. Gets worm and power drops slowly. also gets very worm on 6S 13x8 700W.
Expected better :(

acrozic | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2013

Just got the motor.
4S 17x8 ~500W
5S 17x8 ~600W
6S 15x8 ~600W
The motor gets hot. I will try the first combination on my YAK54 ~1.8Kg and wingspan of 1.4m. hope it will last ...

Napstr | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 25, 2013

Wow a light weight powerhouse! Is a very light motor for the output and runs at high voltage so gains efficiency seems well balanced and smooth - just goes like stink.

bearcatcrazy | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 15, 2012

static ground test : 31 Amps on 6S with 13x6.5 APCE, motor gets fairly warm after 1 minute but generates a lot of thrust ! Reversed the shaft because I did not trust the small C clip.
Flight report scheduled for tomorrow.

JaroEDF | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 23, 2012

Shaft is pretty soft, it bends pretty easy. Fortunately it is no problem to buy spare shaft in my local shop. Engine cannot handle 1000W, it overheat way too much. 800W is maximum for this motor on 6S.

Steve_B | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 11, 2012

A real powerhouse on 6 cells. Using a Xoar 15x8 in static test I get:
45A
1060W
8300RPM
Approx 9lb thrust

In flight peak power was 965W and current 41.6A.

i had reservations about all that thrust being transmitted only though the little c-clip that hold the shaft in, so i reversed the shaft and put a bolt on prop adapter on (motor has drilling for one) and used a retaining collar on the back.

Steve

ROCCO | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 21, 2012

ottimo motore ho provato con una 15 X 8 ho ottenuto un tiro di 3.3 kg

con circa 800 w

con una 14 x 7 ho ottenuto 2.8 kg e 700 w circa

necessita' pero' comperate a parte il mozzo e il supporto motore

nicola | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jan 22, 2012

Ottimo motore l'ho montato sia su un extra 300 della Kyoshio sia sul mio Yak 54 carbon zeta con regolatore Turnigy da 85 ampere spinge tanto che gli aerei vanno su a candela alla stessa velocit dell'orizzontale lo consiglio a tutti.

  1. 1
  2. 2
Arquivos de clientes
Front view Download [654]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!

Related Tags