Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Turnigy mega 200Wx2 Carregador de bateria / descarregador (400w) V2

Generating Links

Turnigy mega 200Wx2 Carregador de bateria / descarregador (400w) V2

Preço:

Now save economize 0,00 € 0,00 €

93,50 €
Enviado de:
  • International (Hong Kong)
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
T200WDUAL
Envio Grátis? Clique aqui aprender mais!

Cansado de carregar dois carregadores para o campo? Necessidade séria potência de carga sem o aborrecimento de vários carregadores? Em seguida, o Turnigy mega 200Wx2 é o carregador que você estava esperando!

Este carregador possui saídas 200w dual, que é 400w de potência total de carga! Cada saída é independente e 2 placas de equilíbrio JST-XH foram incluídos para equilibrar as baterias Li-XX. Um sensor de temperatura também foi incluído para monitorizar a temperatura da bateria durante o processo de carga.

Apenas para algo um pouco uma potência USB 5V / 1A diferente foi incluído, você pode usar essa potência para carregar telefones ou energia qualquer dispositivo compatível com USB.


Spec.
Carregamento de saída: 2 x 200w (400w Total)
Tensão de entrada: 12 ~ 18V DC (500 Watt mínimo)
Carga Faixa de corrente: 0,1 ~ 10.0A
Descarga atual: 0.1 ~ 5.0A
Descarga de energia: 25 watts
Saldo Corrente de dreno: 200mAh / cell
Li-XX Contagem de Células: 1 ~ 6s
Ni-XX Contagem de Células: 1 ~ 18s
Pb tensão da bateria: 2 ~ 24v
Bateria memórias de configuração: 10
Controle de temperatura inteligente: Sim
PC Link: Mini USB
Cooling: Dual Fan
USB Fonte de alimentação: 5V / 1A
Peso: 900 g
Dimensões: 195x125x54mm

Inclui.
2 x placas JST-XH Saldo
Sensor Temp
chumbo carga 1 x jacaré
2 x conector Bala 4 milímetros rabo de porco (Custom caber seus próprios conectores)

* Nota: manual e software disponíveis na guia arquivos. Esta é a versão V2 melhorada do Turnigy mega 200Wx2.

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

Parker | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 20, 2014

This was a really great charger. Worked flawlessly for a long time, then while charging two 6S batteries at the max rate, stopped working and reported "INPUT VOLTAGE ERROR." I unplugged it and reapplied power, now only one of the charging circuits works... Not sure what can be done to fix it, charging port one always says "CONNECTION BREAK" when I try to charge a battery. Any ideas to fix please comment. I wish I could give this 5 stars, but low input voltage shouldn't fry a charging circuit.

GUIX | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 22, 2013

puissant, il charge tous les accus pour les voitures brushless. le seul petit dfaut, c'est qu'il est lgrement bruyant. C'est un trs bon rapport qualit prix.
Good deal

Mark | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 06, 2013

This charger has to be the best bang for your buck. I just received mine and love it. This is now the V2 and fans are quite. No louder then my other chargers. I thought it was just 2 charging ports to charge 2 of the same spec batteries BUT it is in fact 2 chargers in one which you switch the display info from one port to the other.

Well done H/K on yet another fine product that's well priced for everyone......

Multiprop | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 02, 2013

Awesome charger. Have had no problems.

Roger | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 26, 2013

Very impressed. Charges max 6s at 8.4Amps per side. I tend to charge in parallel so I put 6s 10,000Mah packs on each side and charge in a little over an hour.

For individual packs it's much faster of course. And accurate too. It's fairly noisy but no more so than my other lipo chargers.

Mike | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 05, 2013

This charger is highly recommended. I bought this with the HobbyKing 30 amp power supply, great combination.

Like any new (and up to date) device, read the manual and get used to the functions before you use it. I downloaded the manual from the "Global" purchase area from the files tab. It does not show up in the "United States" section (no big deal).

This charger is accurate, fast, and can be a little difficult to use for some, but after careful review of the manual actually makes it easy to use.

The burn-in smell only lasts a short while and eventually goes away, do not worry. And if a guy who paid four times as much for his charger complains about the fan noise, tell him this will last longer since it runs cooler.

jaredw911 | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 26, 2013

This charger is rubbish. I bought this charger with high hopes of being able to charge 2 batteries at a time. Firts time i charged a battery 6s 5000mah 70c at 10amps it blow up. The charger is basicly 2 chargers in one and one side still worked. I needed the charger so didnt return it and carried on using one side. I charged another different 6s 5000mah lipo but at 7amps to give it a chance and again same fault. Charger appeared to working fine. the fan was running but after about 10 minutes the same fault came up, (connection break). now it wont charge anything. i took it apart and the transistors are blown. replaced these with correct transistors but there are further faults down the line. This is a very poor quality charger not fit for purpose.

Looks nice, dosnt work better off setting fire to your money.

no speed | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 26, 2013

The battery charger makes good his job.
Test with 2x5000mAh / 6S Lipo, charging current was 2x5A,
everything ok.
The Balancher-Voltage drift only unimportant,
for Price of the loader satisfactory.

MJBENNETT9 | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 13, 2013

I think the price should be lower than two single units. I miss large screen of 8150 charger too. That said, it does work, is fast charging, but have yet to get passed 2A discharge. Also, while it will alert if you don't have main charging leads connected or if they come loose, it does NOT alert you if you mistakenly set say a 3S battery to charge at 4S or higher. It just Does it. All this gadgetry and it can't tell it's charging wrong battery.

haydent | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 07, 2013

good charger, but would have been nice to get a few common battery plug/adapters with it -1 star for that

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 9
Arquivos de clientes
Manual Download [1749]
No File Name Download [1749]
burned componet Download [27]
burned componet Download [27]
burned componet Download [27]
Manual Download [1749]
LogView ptbr Download [0]
super easy fan noise mod Download [229]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!

Acessórios